A WORLDWIDE COMMITMENT A CUSTOMER COMMITMENT

With offices worldwide, PACE is a recognized world leader in In 2001 the distinguished Frost & Sullivan Award for the
the development of solutions for the assembly and repair of World Surface Mount Technology Rework and Repair
highly advanced electronics. Our expertise extends back to Equipment Industry was bestowed upon PACE.
the dawn of the modern electronics industry. In 1958, PACE
The Frost & Sullivan Market Engineering Customer Service
introduced training programs for the repair of printed wire
Leadership Award is presented to companies that have
assemblies, and soon after, revolutionized the industry by
demonstrated superior responsiveness to customer needs
creating the first self-contained vacuum desoldering system.
and value-added support in technology and services.
Today, PACE continues to provide innovative solutions, products
PACE was selected based upon independent research with
and training for the rework, repair and testing of printed circuit
customers, key market participants and even our competition.
assemblies. Our unique capabilities and evolving vision have
This award reiterates PACE’s commitment to excellence from
provided universal solutions for thru-hole and surface mount
product concept to customer service in the field. Frost &
assembly and rework problems for the most advanced
Sullivan’s research recognizes that the key to PACE’s success
electronics.
in the industry is our interactive approach with customers to
Additionally, PACE manufactures Fume Extraction Systems to provide solutions and respond to end-user feedback when
reduce exposure to harmful particulates and gases created from developing products.
hand soldering operations. PACE Fume Extraction Systems
effectively remove these contaminants from the worker’s
breathing zone thereby reducing or eliminating health risks In 2002 PACE was awarded World Class Status,

and improving productivity. signifying that PACE uses best practices in its design,
development and manufacturing processes to provide
Our strong commitment and history of achievement has the finest quality products to its customers at the lowest possible
resulted in an unparalleled range of Assembly, Repair and cost. The first Maryland based company to receive this coveted
Fume Extraction solutions to meet your needs whether working award, PACE stands alone in its market segment in achieving this
to IS0-9000, industrial, military or your own internal highly regarded status.
specifications. Whatever the challenge, PACE stands ready
to help you set a new standard.

SOLUTIONS FOR THE ELECT RONICS

INTERCONNECTION PROCESS

PAC E U S A
9030 Junction Drive The following are trademarks and/or service marks of PACE, Incorporated,
Annapolis Junction Annapolis Junction, MD USA: INSTACAL™, ENDURA™, FUMEFLO™,
MD 20701 HI-FLO™, LO-FLO™ MINITWEEZ™, PACEWORLDWIDE™,
U.S.A. POWERMODULE™ and POWERPORT™.
Tel: 301-490-9860
The following are registered trademarks and/or service marks of PACE,
Fax: 301-498-3252
Incorporated, Annapolis Junction, MD USA: ARM-EVAC®, FLO-D-SODR®,
HEATWISE®, MINI-WAVE®, PACE®, PERMAGROUND®, SENSATEMP ®,
PAC E E U R O P E
SNAP-VAC®, SODRTEK®, SODR-X-TRACTOR®, TEMPWISE®, THERMO-DRIVE®,
Sherbourne House,
THERMOFLO®, THERMOJET®, THERMOTWEEZ® and VISIFILTER®.
Sherbourne Drive
Tilbrook, Milton Keynes, PACE products meet or exceed all applicable military and civilian EOS/ESD,
MK7 8HX temperature stability and other specifications, including MIL-STD-2000,
United Kingdom ANSI/J-STD-001, IPC 7711, IPC 7721 and IPC-A-610.
Tel: (44) 1908-277666
Fax: (44) 1908-277777

INTERNE T ©2004 PACE, Inc. Annapolis Junction, Maryland

www.paceworldwide.com All rights reserved. Printed in UK.

P/N 5400-0131 07/04

 ® SODR-TEK® PRODUCTS FEATURE TWO THERMAL CONTROL TECHNOLOGIES
SODR-TEK REGARDLESS OF YOUR WORK, WE HAVE THE BEST SOLUTION.

THE PROFESSIONAL TOOL FAMILY FOR THE HEATWISE® TECHNOLOGY

REPAIR TECHNICIAN AT AFFORDABLE PRICES Its no secret that today’s PCBs offer a greater instantaneous load sensing and on-demand the direct power approach is ideal as the
PACE®, Incorporated is pleased to introduce When job variability is high and contracts variety of challenges than ever before. The power to quickly reflow solder joints, thermal demand is continuously monitored
“Sodr-Tek®”. Sodr-Tek® products have been change so quickly, it just does not make size of the PCB and components continue to regardless of the mass of the application. and the heater responds immediately
designed specifically to meet the changing sense to purchase solders and fluxes in decrease, requiring micro-tools, component For applications where the work cycle is by providing adequate power to meet the
needs of today’s service and bench-top large quantities! density is increasing posing accessibility high and for micro-miniature applications demand from the work, without overshoot.
technicians. Sodr-Tek systems are modular problems, and the thermal demand of the
and integrate with each other, allowing With almost 50 years of experience and PCB continues to increase as more and more THE CHALLENGE - Efficiency of joints soldered per hour with
technicians to purchase only the tools industry leadership in rework and repair layers and processing power is packed into same tip geometry and thermal out put.
required for today without sacrificing technology and techniques, PACE® provides ever shrinking areas. Systems that only offer 128% PACE Heatwise® Heating Technology Systems
the needs of tomorrow. With Sodr-Tek®, much more than simply equipment. When one thermal management approach are not
always adequate to meet the challenges 117% Brand “M”
additional equipment and functionality you select Sodr-Tek®, you receive access
can be added at any time to meet the ever to one of the most valuable resources in the posed by the high variability in rework and 100% Conventional Iron Brand “P”
changing needs as required by your future industry, PACE’s applications and technical repair operations. PACE® is pleased to offer
PACE is the proud recipient of the
the latest advancement in technology and 99% Brand “H”
work or by changes in electronics support services. Over the years, our 2003 SMT Vision Award for Rework
and Repair Products. productivity enhancing solutions for soldering Conventional Iron Brand “H” • What does this mean to you?
technology. Because Sodr-Tek® is part of the applications support services have been 67%

PACE® family, you can rest assured that you the cornerstone of quality assurance and and repair operations in over twenty years • Substantial productivity savings by
to the Service Technician at an affordable
57% Conventional Iron Brand “W”
will always have the right tools for the job! repair reliability for countless customers. maximizing efficiency and thru-put.
Whenever you encounter a new component, price… HEATWISE® Performance Control
In addition to top of the line equipment, a new PCB, or if you just want reassurance Technology!
PACE HEATWISE® TECHNOLOGY SYSTEMS SAVE YOU TIME & MONEY
the Sodr-Tek® product line also includes that your process is correct and safe, simply
everything the service technician will need contact PACE® and we will create a The key advantage of HEATWISE® ANNUAL HOURS SAVED WITH HEATWISE® ANNUAL SAVINGS (US $)*
to complete their work… from solder (leaded procedure for you that not only identifies is that its advanced electronics provide
BRAND M 58 HOURS $1,160
and lead free) and flux to solder wick. the equipment required to do the job
CONVENTIONAL IRON BRAND P 164 HOURS $3,280
The difference with Sodr-Tek® is that all correctly, but also every step in the process!
of our material products are packaged in Let’s take a look at the products! BRAND H 176 HOURS $3,520
quantities that make sense for the technician! CONVENTIONAL IRON BRAND H 553 HOURS $11,060

CONVENTIONAL IRON BRAND W 768 HOURS $15,360

®
SENSATEMP * Assuming a fully burdened labour rate of $20 USD per hour

TECHNOLOGY
TABLE OF CONTENTS SensaTemp® is a highly responsive Heat temperatures. As a result, the amount of time are being performed. SensaTemp® delivers
PAGE CONTENTS PAGE CONTENTS Delivery System that continuously monitors spent reflowing each joint is reduced, consistent repeatable results regardless of
the thermal demand of the work and minimizing the possibility of damage. the thermal demand of the work. Its ability
3 HEATWISE® and SENSATEMP® Technology 22 ST 350 Convective Rework Center
responds immediately by driving in the Additionally, SensaTemp® allows you to to respond quickly is ideal for light work,
4 HEATWISE Handpieces
®
23 ST 350 Convective Rework Center required power for safe, rapid reflow change tips, heaters, and handpieces at while its amazing thermal capacity can meet
5 SENSATEMP Handpieces
®
24 Nozzles for use with ST 300, ST 325 & ST 350 of any joint. will, without ever having to recalibrate! the challenges of the heaviest thermal loads,
SensaTemp’s unique Thermal Management providing the operator with the flexibility that
6 SENSATEMP Handpieces
®
25 Nozzles for use with ST 300, ST 325 & ST 350 At the heart of SensaTemp is a laser trimmed, System acts as thermal dampener that is essential in today’s ever changing
7 SENSATEMP® Handpieces 26 Area Array Component Kits platinum RTD sensor that is 5 times more minimizes tip temperature overshoot, environment. Regardless of your application,
8 TD-100 Tips 27 BGA Reballing Kits accurate than conventional thermo-couples. ensures temperature stability and creates SensaTemp® delivers unsurpassed thermal
This level of accuracy allows for safe, a “thermal reservoir” that can be accessed performance, productivity and “bottom
9 TD-100 & MT -100 Tips 28 Preheaters - ST 400 & ST 450 productive soldering at the lowest possible instantaneously when high mass applications line” savings.
10 PS-90 Tips 29 Fixtures and PCB Holders
11 PS-90 & TP-65 Tips 30 Dispensing - ST 600 SENSATEMP CONTROL SENSATEMP PERFORMANCE CHART
Repetitive Production Soldering with Production Iron on 10 High Mass Loads*
12 SX-80 31 Dispensing Consumables
13 TT -65 Tips 32 Fume Extraction MICROPROCESSOR
CONTROLLED POWER
SOURCE
14 TJ-70 & TJ-80 Jet Nozzles 33 Fume Extraction - FX 50 & Arm-Evac 50
15 Systems & Power sources - HW 50 34 Fume Extraction - Arm-Evac 105 & ESD Safe Flex Arm
16 Systems & Power sources - ST 25 & ST 45 35 Sodr-Tek Materials
17 Systems & Power sources - ST 125 & ST 145 36 Solder Wick
18 Systems & Power sources - Tek-Link & Snap-Vac Technology 37 Solder Wick THERMAL
REQUIRED
HEAT
LOAD
19 Convective Systems 38 Applications & Support Training
MONITORS *each load represents the
20 Convective System, Low Cost Hot Air - ST 300 39 SodrTek® Configurations & Systems THERMAL LOAD thermal characteristics of
AND HEAT
a high mass solder joint.
21 Convective System, Programmable Hot Air - ST 325 DELIVERY

2 www.paceworldwide.com www.paceworldwide.com 3
 HANDPIECES HANDPIECES
It is important to develop a full understanding of the capabilities of each of the available handpieces HEATWISE® HANDPIECES
because they are unique to the application being performed. Please refer to the table below to match
The following handpieces are compatible with the HW 50 system.
your application with the appropriate handpieces. The details and specifications for each handpiece
are listed after the table. The only Soldering Iron (TD-100 Thermo-
Drive® Iron) crafted by a team of surgical
HeatWise Handpieces SensaTemp Handpieces Component instrument engineers, is uniquely designed
Handling
to eliminate operator fatigue, improve control
TD-100 MT -100 PS-90 SX-80 TT -65 TJ-70 TJ-80 TP-65 PV -65 and enhance productivity in demanding
soldering applications. The TD-100 uses
Handpiece Kit Part Number (Handpiece & Stand) 6993-0242-P1 6993-0243-P1 6993-0199-P1 6993-0213-P1 6993-0207-P1 6993-0206-P1 6993-0247-P1 6993-0205-P1
a patented tip-heater cartridge that is not
Handpiece Only Part Number 6010-0132-P1 6010-0140-P1 6010-0131-P1 6010-0106-P1 7025-0001-P1 7023-0002-P1 6010-0142-P1 7024-0001-P1 7027-0001-P1 only the best performing heater cartridge,
but is also the lowest priced tip-heater
High Cycle Soldering cartridge on the market today! Over
50 soldering tip geometries are available
Standard Soldering
as well as over 30 surface mount removal
tips. See Pages 8 & 9 for tip selection. TD-100 Micro Soldering
High Mass Soldering

Micro Soldering TD-100 Thermo-Drive® Iron

The only high capacity, micro tweezer

Solder Wicking
(MT -100 MINITWEEZTM) on the market
Thru-Hole Desoldering today features soft comfort grips, the smallest
stroke available, and its tweezing action
SMT Land Preparation mimics the natural motion of the human hand
Solder Removal from Lands
to eliminate hand fatigue. With more than
10 styles of component removal tips
Thru-Hole Desoldering available the MT -100 is one of the most
versatile component removal tweezers and
Large SMD Removal our tips cost less than half of our competitors!
Standard SMD Removal
See Page 9 for tip selection.

Micro SMD Removal MT -100 Removing Component

Large Component Installations with Solder Paste MT -100 MINITWEEZ ™

Standard Component Installations with Solder Paste

Micro Component Installations with Solder Paste

SENSATEMP® HANDPIECES
Component Manipulation
The handpieces listed below feature SensaTemp control technology and are compatible with the ST 25, ST 45, ST 125, and ST 145.

The Universal Soldering Iron (PS-90) is ideal

for most soldering applications and SMT
rework operations where high thermal capacity
and flexibility is required. There are over 75
single point soldering tips and over 30 surface
mount removal tips available for the PS-90.
See Pages 10 & 11 for tip selection.

PS-90 with patented MiniWave Tip

PS-90 Universal Soldering Iron

PS-90 FEATURES
A High Tensile Stainless Steel heater shroud for maximum ruggedness,
durability and life in the harshest environments,
Gold connectors to ensure reliability and virtually eliminate oxidation, and
An operator replaceable plug-in heater cartridge that can be changed in seconds,

4 www.paceworldwide.com www.paceworldwide.com 5
 HANDPIECES HANDPIECES
SENSATEMP® HANDPIECES SENSATEMP® HANDPIECES
DESOLDERING & MINI HOT AIR JET
SOLDER REMOVAL When the precise application of hot air
The best performing, in-line, vacuum is required, our slim line air pencil (TJ-80
desoldering tool (SX-80 Sodr-X-Tractor®) THERMOJET®) is ideal for delivering heat
is ideal for Thru-Hole desoldering when fitted for the installation and removal of chip
with EnduraTM Desoldering tips and for SMT components, SOTs, and SOICs. Multiple
land clean-up when fitted with Flo-D-Sodr® quick-change nozzle sizes are available.
tips. Endura desoldering tips are the longest The handpiece’s slim line, pencil grip design
lasting, best performing soldering tips on the maximizes operator comfort and control.
market! The SX-80 features a unique solder The TJ-80’s airflow is actuated with a foot
collection system that can utilize disposable pedal when connected to the Hi-Flo pump
Flux/Solder traps or a re-usable glass SX-80 Desoldering and with a panel mounted switch when TJ-80 Reflowing
collection tube. An operator replaceable Thru-hole Solder Joint connected to the Lo-Flo pump for micro work leads on a QFP
plug-in heater cartridge that can be changed demanding the focused, gentle, and precise
in seconds is standard. The SX-80 has a application of hot air, such as 0402s and
SX-80 Sodr-X-Tractor® TJ-80 Mini Thermal Jet
wide range of standard and precision 0201s. See Page 14 for nozzle tip selection.
Endura desoldering tips for when access is
tight! The handpiece can also be fitted with
PACE’s Pik-Tips for surface mount component
removal. See Page 12 for tip selection.

HEAVY DUTY THERMAL TWEEZER QFP REMOVAL TOOL

The most versatile and the only patented SMT One of the most unique and innovative
removal tool (TT -65 ThermoTweez®) handpieces (TP-65 THERMOPIK®)
provides safe, one-handed, rapid reflow available for removing 4 sided components
and component removal of PLCCs and other provides safe, one-handed reflow and
4 or 2 sided SMT components. Unlike other removal of of QFPs in just seconds. Its high
methods, its high thermal capacity and efficiency design targets controlled heat at
targeted heat delivery remove even the the joints, away from sensitive adjacent
largest SMDs in just seconds without components and substrate areas. The TP-65
damaging the PCB or risking of adjacent is also fitted with a vacuum pik for secure
component reflow; even on heavy component lift-off after reflow. Vacuum
assemblies. The unique vertically oriented TT -65 Removing SMT Component actuation is through a finger switch on the TP-65 Removing a QFP
handpiece and a wide variety of quick- handpiece. See Page 11 for tip selection.
change, slim-line tips easily reach into the
tightest spaces for fast, safe component TT -65 ThermoTweez® TP-65 ThermoPik
removal. The TT -65 also features a patented
“stroke” adjustment to reduce hand fatigue
for repetitive operations. See Pages 12 & 13
for tip selection.

HOT AIR JET COMPONENT HANDLING WAND

The high capacity air pencil (TJ-70 When you need to hold components
THERMOJET®) provides safe, rapid reflow securely, and safely with out risking
of chip components, SOTs, SOICs, PLCCs, contamination or damage, the vacuum wand
and QFPs. Its flared grip design and focused (PV-65 Pik-Vac) is the ideal choice!
nozzle-tips lets you easily target controlled The PV -65 is slim, comfortable, and features
heat right at the solder joints without damage on-demand vacuum that is controlled by
to the board or adjacent components. A your finger. A variety of vacuum cups are
finger actuated air switch provides safe available for use with the PV -65.
“On-Demand” capability without the
constant running of the Hi-Flo pump. Unique
nozzle-tips offer single and dual airstreams TJ-70 Reflowing both sides PV-65 lifting a SMT component
so 2 sides of a component can be of SMT component
simultaneously reflowed.
See Page 14 for nozzle tip selection.
TJ-70 ThermoJet® PV-65 Pik-Vac

6 www.paceworldwide.com www.paceworldwide.com 7
 TIPS TIPS
TD-100 SOLDERING TIPS TD-100 SMT REMOVAL TIPS
TIPS DESCRIPTION TIP SIZE - L SIZE - D PART NUMBER TIP - CHIP / SOT REMOVAL COMPONENT TYPE SIZE - A SIZE - B PART NUMBER
1/32" Conical Sharp Extended 13.4mm (0.530") 0.80mm (0.031") 1124-0001-P1 Chip 0402 Angle (fig.A) 2.2mm (.085”) - 1124-0518-P1
1/64" Conical Sharp 7.8mm (0.310") 0.40mm (0.016") 1124-0002-P1 (fig.A) (fig.E) Chip 0201 Angle (fig.A) 0.5mm (.02”) - 1124-0533-P1
1/64" Conical Sharp Bent 30 Degrees 7.8mm (0.310") 0.40mm (0.016") 1124-0003-P1 Chip 1808 (fig.B) 5.0mm (.195”) - 1124-0520-P1
1/64" Conical Sharp Extended 13.5mm (0.535") 0.40mm (0.016") 1124-0004-P1 (fig.B) (fig.F) Chip 0402 (fig.C) 1.0mm (.040”) - 1124-0521-P1
1/32" Conical 4.7mm (0.188") 0.80mm (0.031") 1124-0005-P1 Chip 0201 (fig.C) 0.5mm (0.2”) - 1124-0534-P1
3/128" Conical 4.6mm (0.184") 0.58mm (0.023") 1124-0006-P1 (fig.C) (fig.G) SOT 23 (fig.D) 1.8mm (.070”) - 1124-0522-P1
1/16" 90 Degree Chisel 10.9mm (0.430") 2.03mm (0.080") 1124-0007-P1 SOT 89 (fig.E) 2.8mm (.110”) - 1124-0523-P1
3/64" 30 Degree Chisel 9.7mm (0.380") 1.20mm (0.047") 1124-0008-P1 (fig.D) Chip 1206 (fig.F) 3.6mm (.142”) - 1124-0524-P1
3/64" 30 Degree Bevel 3.6mm (0.140") 1.20mm (0.047") 1124-0009-P1 Chip 0805 (fig.G) 2.4mm (.095”) - 1124-0525-P1
13/64" Chisel 7.62mm (0.300") 5.15mm (0.203") 1124-0010-P1 TIP - SOIC / SOP / TSOP REMOVAL COMPONENT TYPE SIZE - A SIZE - B PART NUMBER
1/64" 60 Degree Bevel 14.7mm (0.580") 0.40mm (0.016") 1124-0011-P1 SOIC 14/16 5.2mm (.205”) 10.5mm (.415”) 1124-0504-P1
1/32" 30 Degree Chisel 9.1mm (0.360") 0.80mm (0.031") 1124-0012-P1 SOIC 20 9.6mm (.377”) 13.6mm (.535”) 1124-0505-P1
3/32" 30 Degree Chisel 9.9mm (0.390") 2.40mm (0.094") 1124-0013-P1 SOP 28 10.8mm (.426”) 18.6mm (.734”) 1124-0506-P1
5/64" 60 Degree Chisel 4.7mm (0.185") 2.00mm (0.078") 1124-0014-P1
SOP 40 11.9mm (.467”) 25.7mm (1.011”) 1124-0507-P1
1/64" Conical, Sharp, Bent 30 Degrees, Extended 15.1mm (0.595") 0.40mm (0.016") 1124-0015-P1
SOP 44 13.1mm (.516”) 28.4mm (1.120”) 1124-0508-P1
3/64" Chisel Bent 30 Degrees 11.7mm (0.460") 1.20mm (0.047") 1124-0016-P1
TSOP 56 18.8mm (.739”) 14.1mm (.557”) 1124-0509-P1
1/16" 60 Degree Chisel 15.8mm (0.620") 1.60mm (0.063") 1124-0017-P1
TSOP 28 12.0mm (.471”) 8.5mm (.333”) 1124-0510-P1
1/32" Conical Sharp Extended 16.7mm (0.660") 0.80mm (0.031") 1124-0018-P1
SOIC 8 5.1mm (.202”) 4.65mm (.183”) 1124-0519-P1
1/16" 30 Degree Chisel 9.9mm (0.390") 1.60mm (0.063") 1124-0019-P1
TSOP 40 18.8mm (.740”) 10.4mm (.410”) 1124-0526-P1
1/8" 90 Degree Chisel 4.8mm (0.190") 3.20mm (0.125") 1124-0020-P1
TIP - PLCC / QFP REMOVAL COMPONENT TYPE SIZE - A SIZE - B PART NUMBER
3/128" Conical Sharp Bent 30 Degrees 14.4mm (0.570") 0.58mm (0.023") 1124-0021-P1
PLCC 28 Socket 9.3mm (.365”) 9.3mm (.365”) 1124-0511-P1
1/16" Conical Sharp 9.9mm (0.390") 1.60mm (0.063") 1124-0022-P1
PLCC 32 14.2mm (.561”) 11.7mm (.459”) 1124-0512-P1
1/8" 90 Degree Chisel Extended 8.6mm (0.340") 3.20mm (0.125") 1124-0023-P1
PLCC 44 16.8mm (.662”) 16.8mm (.662”) 1124-0513-P1
1/16" 30 Degree Bevel 9.9mm (0.390") 1.60mm (0.063") 1124-0024-P1
QFP 144 20.6mm (.810”) 20.6mm (.810”) 1124-0514-P1
1/16" Conical Sharp Extended 12.1mm (0.478") 1.60mm (0.063") 1124-0025-P1
PLCC 28 11.8mm (.465”) 11.8mm (.465”) 1124-0515-P1
1/16" Chisel Bent 30 Degrees 9.7mm (0.385") 1.60mm (0.063") 1124-0026-P1
QFP 100/128 22.0mm (.865”) 16.0mm (.628”) 1124-0516-P1
3/128" Conical Sharp 15.2mm (0.600") 0.58mm (0.023") 1124-0027-P1
PLCC 20 9.3mm (.365”) 9.3mm (.365”) 1124-0527-P1
3/64" Chisel, Bent 30 Degrees, Extended 15.2mm (0.600") 0.91mm (0.36") 1124-0028-P1
PLCC 18 7.6mm (.300”) 12.8mm (.505”) 1124-0528-P1
1/32" 30 Degree Bevel 9.1mm (0.360") 1.91mm (0.75") 1124-0029-P1
TQFP 80 12.5mm (.491”) 12.5mm (.491”) 1124-0529-P1
1/32" Conical Sharp 9.9mm (0.390") 0.80mm (0.031") 1124-0030-P1
PLCC 52 19.4mm (.762”) 19.4mm (.762”) 1124-0530-P1
Heat Staking N/A 4.04mm (0.159") 1124-0031-P1
QFP 100 26.6mm (1.048”) 26.6mm (1.048”) 1124-0531-P1
MiniWave N/A 3.05mm (.120") 1124-0032-P1
BLADE TIPS SOLDER REMOVAL BLADES SIZE - A SIZE - B PART NUMBER
Angled MiniWave, 3.3 mm N/A 3.05mm (.120") 1124-0033-P1
Blade 10.8mm (.425”) - 1124-0501-P1
Single Sided Chisel N/A 3.05mm (.120") 1124-0034-P1
Blade 16.0mm (.630”) - 1124-0502-P1
Angled MiniWave, 2.4mm N/A 2.11mm (.083") 1124-0035-P1
Blade 21.2mm (.835”) - 1124-0503-P1
1/128" Conical N/A 0.20mm (0.008") 1124-0036-P1
Blade 25.0mm (.984”) - 1124-0532-P1
1/4 Flat Blade N/A 4.57mm (0.180") 1124-0037-P1
Single Sided Chisel, Fine Pitch N/A 1.5mm (.06") 1124-0038-P1
Angled MiniWave, Fine Pitch N/A 1.6mm (.064") 1124-0039-P1
MT-100 SMT REMOVAL TIPS
MicroFine Single Sided Chisel N/A 0.9mm (.035”) 1124-0040-P1 TIP - CHIP / SOT REMOVAL COMPONENT TYPE SIZE - A SIZE - B PART NUMBER
MicroFine Single Sided Chisel N/A 1.1mm (.045”) 1124-0041-P1 Chip (fig.A) 0.2mm (.008”) 0.2mm (.008”) 1124-1001-P1
Chip, SOT (fig.B) 0.7mm (.03”) 0.5mm (.03”) 1124-1002-P1
MicroFine Conical N/A 0.25mm (.01”) 1124-0042-P1 (fig.A)
Chip, SOT (fig.B) 0.7mm (.03”) 1mm (.04”) 1124-1003-P1
MicroFine Bent Conical N/A 0.76mm (.03”) 1124-0043-P1 Chip, SOT (fig.B) 0.7mm (.03”) 2mm (.08”) 1124-1004-P1
MicroFine Bent Conical N/A 0.5mm (.02”) 1124-0044-P1 SOIC, SOT, TSOPS (fig.C) 0.7mm (.03”) 6mm (.24”) 1124-1005-P1
(fig.B)
Angled Micro-Wave N/A 1.1mm (.045") 1124-0045-P1 SOIC, SOT, TSOPS (fig.C) 0.7mm (.03”) 8mm (.31”) 1124-1006-P1
SOIC, SOT, TSOPS (fig.C) 0.7mm (.03”) 10mm (.39”) 1124-1007-P1
Micro-Wave N/A 1.1mm (.045") 1124-0046-P1
SOIC, SOT, TSOPS (fig.C) 0.7mm (.03”) 13mm (.51”) 1124-1008-P1
Angled Chisel, 1.33mm 8.4mm (0.33") 1.33mm (0.051") 1124-0047-P1 (fig.C)
SOIC, SOT, TSOPS (fig.C) 0.7mm (.03”) 18mm (.74”) 1124-1009-P1
Single Sided Chisel, 0.3/16mm 17.00mm (0.693") 4.55mm (0.178") 1124-0048-P1 SOIC, SOT, TSOPS (fig.C) 0.7mm (.03”) 28mm (1.09”) 1124-1010-P1

8 www.paceworldwide.com www.paceworldwide.com 9
 TIPS TIPS
PS-90 SOLDERING TIPS PS-90 SMT REMOVAL TIPS
TIPS DESCRIPTION TIP SIZE PART NUMBER TIPS DESCRIPTION TIP SIZE PART NUMBER

1/16" Chisel 1.60mm (0.063") 1121-0335-P5 Flat Blade Tip A = 7.6mm (0.3") 1121-0512-P1

1/32" Conical 0.80mm (0.031") 1121-0336-P5

Flat Blade Tip A = 10.2mm (0.4") 1121-0514-P1
1/8" Chisel 3.20mm (0.125") 1121-0337-P5

1/16" Chisel (MicroFine) 1.60mm (0.063") 1121-0349-P5 Flat Blade Tip A = 12.7mm (0.5") 1121-0473-P1
1/32" Chisel 0.80mm (0.031") 1121-0359-P5
Flat Blade Tip A = 17.8mm (0.7") 1121-0416-P1
3/32" Chisel 2.40mm (0.094") 1121-0360-P5

1/32" Bent Chisel 0.80mm (0.031") 1121-0361-P5

Flat Blade Tip A = 20.3mm (0.8") 1121-0497-P1
1/64" Bent Conical 0.40mm (0.016") 1121-0828-P5

Single-Sided Chisel 3.30mm (0.13") 1121-0406-P5 Flat Blade Tip A = 25.4mm (1.0") 1121-0448-P1

1/16" Chisel (High Capacity) 1.60mm (0.063") 1121-0414-P5

Mini-Wave 3.30mm (0.13") 1121-0490-P5

1/16" Chisel, Long Reach 1.60mm (0.063") 1121-0499-P5

1/16" Bent Chisel, Long Reach 1.60mm (0.063") 1121-0500-P5

TP-65 SMT REMOVAL TIPS
1/16" Chisel, Extended Reach 1.60mm (0.063") 1121-0533-P5
TIPS DESCRIPTION TIP SIZE PART NUMBER
Angled Mini-Wave 2.40mm (0.09") 1121-0610-P5
FlatPack Tip 15.5mm x 21.6mm (0.61" x 0.85") 1121-0322-001-P1
1/64" Sharp Conical 0.40mm (0.016") 1121-0829-P5
FlatPack Tip 16.8mm x 22.9mm (0.66" x 0.90") 1121-0322-002-P1
1/64" Sharp Bent Conical 0.40mm (0.016") 1121-0830-P5

1/64" Sharp Conical, Extended Reach 0.40mm (0.016") 1121-0831-P5 PQFP-68 Tip (bumper pack) 15.7mm x 15.7mm (0.62" x 0.62") 1121-0323-P1

1/64" Sharp Bent Conical, Extended Reach 0.40mm (0.016") 1121-0832-P5 PQFP-64/80 (non-bumper pack) 15.7mm x 15.7mm (0.62" x 0.62") 1121-0484-P1

* The PS-90/PS-90N can be used with over ninety tips. The PS-90/PS-90N can be used with 4.7mm(3⁄16") shank diameter, Standard Life, Long Life, PQFP-84 Tip 18.3mm x 18.3mm (0.72" x 0.72") 1121-0324-P1
and SMT Rework tips, making it the most flexible, universal iron on the market today! Visit our website at www.paceworldwide.com for more details.
PQFP-100 Tip 20.8mm x 20.8mm (0.82" x 0.82") 1121-0325-P1

PQFP-132 Tip 25.9mm x 25.9mm (1.02" x 1.02") 1121-0326-P1

PS-90 SMT REMOVAL TIPS PQFP-144 29.2mm x 29.2mm (1.15" x 1.15") 1121-0456-P1

TIPS DESCRIPTION TIP SIZE PART NUMBER PQFP-208 30.0mm x 30.0mm (1.18" x 1.18") 1121-0544-P1
SOIC - 8 (JEDEC) (fig.A) 5.05mm x 5.08mm (0.199" x 0.200") 1121-0390-P1
(fig.A)
PQFP-160 Tip 31.0mm x 31.0mm (1.22" x 1.22") 1121-0351-P1

SOIC - 14 (JEDEC) (fig.A) 5.05mm x 8.99mm (0.199" x 0.354") 1121-0391-P1 PQFP-196 36.3mm x 36.3mm (1.43" x 1.43") 1121-0483-P1

Vacuum Cups
SOIC - 16 (JEDEC) (fig.A) 5.05mm x 10.2mm (0.199" x 0.404") 1121-0392-P1
Small 4.4mm (0.195") 1121-0382-P5
(fig.B)
(fig.C) Chip Component (fig.B) 3.56mm x 2.03mm (0.14" x 0.08") 1121-0303-P1 Medium 7.62mm (0.300") 1121-0383-P5

Large 12.7mm (0.500") 1121-0384-P5

TSOP (fig.C) 19.333mm x 8.1mm (0.76" x 0.32") 1121-0403-P1
Kit (with 3 cups) Includes one of each size 6993-0153-P1

10 www.paceworldwide.com www.paceworldwide.com 11
 TIPS TIPS
SX-80 ENDURA DESOLDERING TIPS & SOLDER REMOVAL TIPS TT-65 SMT REMOVAL TIPS
ENDURA TIPS DESCRIPTION TIP SIZE PART NUMBER TIPS DESCRIPTION TIP SIZE A x B PART NUMBER

Surface Mount Component Removal Tips

Thermo-Drive 0.76mm (0.030") I.D. X 2.03mm (0.080") O.D. 1121-0625-P5
Chip Component (vertical) A=0.76mm (0.03") 1121-0398-P1
Thermo-Drive 1.02mm (0.040") I.D. X 2.29mm (0.090") O.D. 1121-0624-P5
Chip Component (vertical) A=2.0mm (0.08") 1121-0313-P1

Thermo-Drive 1.52mm (0.060") I.D. X 3.05mm (0.120") O.D. 1121-0626-P5 Chip Component (vertical) A=4.1mm (0.16") 1121-0399-P1

Chip Component (vertical) Small SOIC A=6.4mm (0.25") 1121-0401-P1

Thermo-Drive 2.29mm (0.090") I.D. X 5.1mm (0.200") O.D. 1121-0627-P5
Thin-Walled Chip Component (vertical) A=0.76mm (0.03") 1121-0520-P1
Thermo-Drive, Flathead (0.050") x (0.090") I.D. X (0.110") x (0.190") O.D. 1121-0821-P5
Thin-Walled Chip Component (vertical) A=2.0mm (0.08") 1121-0521-P1
Extended Reach Thermo-Drive 0.76mm (0.030") I.D. X 2.29mm (0.090") O.D. 1121-0628-P5 Thin-Walled Chip Component and Small SOIC (vertical) A=6.4mm (0.25") 1121-0523-P1

Extended Reach Thermo-Drive 1.02mm (0.040") I.D. X 2.54mm (0.10") O.D. 1121-0629-P5 1/64" Angled Fine Point Conical A=0.43mm (0.017") 1121-0517-P1

Chip Component
Extended Reach Thermo-Drive 1.52mm (0.060") I.D. X 3.05mm (0.120") O.D. 1121-0630-P5
SOIC Components A=10.2mm (0.4") 1121-0514-P1

SOIC, SOJ, SIMMs Component A =12.7mm (0.5") 1121-0473-P1

Precision 0.50mm (0.020") I.D. X 1.79mm (0.070") O.D. 1121-0680-P5 A=17.8mm (0.7") 1121-0416-P1

A=20.3mm (0.8") 1121-0497-P1

Precision 0.76mm (0.030") I.D. X 2.03mm (0.080") O.D. 1121-0678-P5
A=25.4mm (1.0") 1121-0448-P
Precision 1.02mm (0.040") I.D. X 2.29mm (0.090") O.D. 1121-0679-P5
Surface Mount Connectors A=31.8mm (1.25") 1121-0495-P1

Precision 1.52mm (0.060") I.D. X 2.79mm (0.110") O.D. 1121-0690-P5 PLCC/PQFP Removal Tips

PLCC-20 6.86mm x 6.86mm (0.27" X 0.27") 1121-0316-P1

PLCC-28 9.4mm x 9.4mm (0.37" x 0.37") 1121-0317-P1

Flo-D-Sodr 1.52mm (0.060") I.D. X 4.78mm (0.188") O.D. 1121-0631-P5
PLCC-32 12.2mm x 9.65mm (0.48" x 0.38") 1121-0352-P1

Flo-D-Sodr, Precision 0.50mm (0.020") I.D. X 1.78mm (0.070") O.D. 1121-0681-P5 PLCC-44, PQFP-84 14.5mm x 14.5mm (0.57" x 0.57") 1121-0318-P1

PLCC-52, PQFP-100 17.0mm x 17.0mm (0.67" x 0.67") 1121-0319-P1

Flo-D-Sodr, Precision 0.76mm (0.030") I.D. X 2.03mm (0.080") O.D. 1121-0682-P5
PLCC-68, PQFP-132 21.9mm x 21.9mm (0.86" x 0.86") 1121-0320-P1
Flo-D-Sodr, Precision 1.02mm (0.040") I.D. X 2.29mm (0.090") O.D. 1121-0683-P5
PLCC-84, PQFP-160 26.9mm x 26.9mm (1.06" x 1.06") 1121-0321-P1

12 www.paceworldwide.com www.paceworldwide.com 13
 TIPS CONDUCTIVE SYSTEMS & POWER SOURCES
Now that you have identified your applications and selected the appropriate handpiece(s), you now need to choose the Power Source(s)
TJ-70 NOZZLE TIPS to connect the handpieces to. To determine which handpieces can be connected to which power sources, please refer to the table below.
TIPS DESCRIPTION TIP SIZE A x B PART NUMBER
The details and specifications for each power source follow the table.
Power Source Options Pump Options
Small, Straight, Single Jet Tip 0.060" I.D. 1121-0366-P1
Handpiece Options HW 50 ST 25 ST 45 ST 125 ST 145 Lo-Flo Hi-Flo
HeatWise Handpieces
Small, Curved, Single Jet Tip 0.060" I.D. 1121-0338-P1
TD-100
MT -100
SOIC Tip A = 4.32mm (0.17") 1121-0330-P1 SensaTemp Handpieces
(dual-jet) PS-90
SX-80
Flat End Tip A = 7.11mm (0.28") 1121-0365-P1 TT -65

B = 1.88mm (0.074") TJ-70

TJ-80
A = 6.10mm (0.24") 1121-0371-P1
TP-65
B = 1.88mm (0.074")
Non-Powered Handpieces
PV -65
= Compatible with Power Source/pump = Must be used in conjunction with ST 125 or ST 145 via Tek-Link cable for Pump/Vacuum functions

TJ-80 HOT JET NOZZLES HW 50 HEATWISE® SOLDERING SYSTEM

TIPS DESCRIPTION TIP SIZE A x B PART NUMBER
The HW 50 is a single channel HEATWISE® desire, plug in the appropriate Power harshest environments and long life. An
technology based power supply that comes Module, and the system takes care of the optional mounting bracket is available that
Round Nozzle 1.5mm (.06") Inner diameter 1259-0129-P1 with the Thermo-Drive Soldering Iron rest! The HW 50 improves quality, reduces allows it to be mounted under a work-bench
(TD-100). The system can also be used with costs and eliminates the maintenance and or shelf, preserving precious bench top
the MINITWEEZ (MT -100). Using Power calibration hassles associated with other space. An optional Instant-SetBack Chubby
Round Nozzle, Bent 60 degrees 1.5mm (.06") Inner diameter 1259-0130-P1 Modules, the system is the easiest to operate. systems. The heavy-duty metal housing is available for use with the HW 50 and
Simply select the performance level you makes this system the ideal choice for the the TD-100 Thermo-Drive Soldering Irons.

Flat Jet Nozzle 6.1mm x 1.9mm (.24" X .074") 1259-0131-P1 FEATURES

Inner flow dimensions HEATWISE® Technology
No calibration required
Performance level lockout (if Power
Module is removed, the system is shut down)
ESD grounding jack
ESD Safe metal housing
Stackable POWER MODULES
Can be mounted under workbench
or shelf with optional bracket

HW 50

SPECIFICATIONS
Part Numbers 8007-0425 HW 50
8007-0426 HW 50E
Power Requirements: 97-127 VAC, 50/60 Hz, 90 Watts max.
OPTIONAL INSTANT -SETBACK CUBBY
197-253 VAC, 50/60 Hz, 80 Watts max
The optional Instant-SetBack Cubby is
Dimensions: 104mm H x 130mm W x 152mm D (4.1" H x 5.1" W x 6.0" D) available for use with the HW 50. When
Weight: 2.3 Kg (5 lbs.) connected, it automatically puts the system
into SetBack mode when the TD-100 is placed
Tip to ground resistance: 2 ohms or less
in the cubby. Setback mode means that the
Temperature stability: ± 1.1°C (± 2 °F) at idle tip temp. power applied to the handpiece is reduced
Absolute Temperature Stability Meets or exceeds ANSI-J-STD 001 to 176˚C (350˚F) which maximizes the life
of your tips! The part number for the
Available Power Modules: 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5 Instant-Setback Cubby is 6019-0071-P1

14 www.paceworldwide.com www.paceworldwide.com 15
 CONDUCTIVE SOLDERING POWER SOURCES CONDUCTIVE REWORK & AIR PENCIL POWER SOURCES

Sodr-Tek offers four power supplies to control eliminates routine maintenance and the All systems are “stackable” to reduce The ST 125 & ST 145 come standard won’t lose vacuum in continuous use low volume air streams for delicate
conductive handpieces and air pencils need to calibrate! The ESD safe, durable the “foot print” on the benchtop, fitted with PACE’s patented SNAPVAC desoldering applications when removing residual/ micro/miniature applications such
handpieces. All power sources feature metal housings ensure years of service and with an ESD grounding jack, and are technology to ensure quick, clean removal excess solder from surface mount leads. as when installing 0402s and 0201s!
SensaTemp temperature control technology. the sloped face of the front panels is a Tek-Link compatible. (See Page 18). of solder from any through hole joint. The LoFlo pump is ideal for vacuum
SensaTemp improves quality, reduces cost, standard feature for ease of use. The HiFlo pump is so powerful that you wands and for supplying slow moving,

ANALOG POWER SOURCES - EASY TO USE!

The ST 25 is a single channel system without contained vacuum or pressure capability, that is available with the Universal Soldering Iron (PS-90) The ST 125 is a single channel power source with pressure/vacuum capability. It is sold as a power source
or as a power source only (PSO) so you can choose the appropriate handpiece. See Chart on Page 15 for compatible handpieces. only so you can choose the right tools for your job! See Chart on Page 15 for compatible handpieces.

ST 25 SPECIFICATIONS ST 25 shown with PS-90 Iron ST 125 SPECIFICATIONS ST 125 shown with SX-80 Sodr-X-Tractor

Part Numbers 8007-0445 ST 25 w/ PS-90 Part Numbers 8007-0421 ST 125 (PSO)

8007-0446 ST 25E w/ PS-90 8007-0422 ST 125E (PSO)
8007-0441 ST 25 PSO Power Requirements: 97-127 VAC, 50/60 Hz, 120 Watts max.
8007-0442 ST 25E PSO 197-253 VAC, 50/60 Hz, 120 Watts max.
Power Requirements: 97-127 VAC, 50/60 Hz, 90 Watts max. Dimensions: 134mm H x 264mm W x 204mm D (5.25" H x 10.4" W x 8" D)
197-253 VAC, 50/60 Hz, 80 Watts max. Weight: 4.2Kg (9.25lbs.)
Dimensions: 104mm H x 130mm W x 152mm D (4.1" H x 5.1" W x 6.0" D) Tip to ground resistance: 2 ohms or less
Weight: 2.3 Kg (5 lbs.) Temperature Stability: ± 1.1°C (± 2 °F) at idle tip temp.
Tip to ground resistance: 2 ohms or less Absolute Temperature Stability Meets or exceeds ANSI-J-STD ST 125 FEATURES
Temperature Stability: ± 1.1°C (± 2 °F) at idle tip temp. ST 25 FEATURES Temperature Range: 176°to 482°C (350°to 900°F) nominal Analog control
Analog (dial) control
Absolute Temperature Stability Meets or exceeds ANSI-J-STD °C/°F dial display options
°C/°F on dial display
Temperature Range: 176°to 482°C (350°to 900°F) nominal Temperature lockout
Temperature lockout
Lo-Flo Pump
Hi-Flo Pump with patented
DIGITAL POWER SOURCES - Snap-Vac Technology
UNBEATABLE FEATURES AT AN UNBELIEVEABLE PRICE!
The ST 45 is a single channel, programmable system without contained vacuum or pressure capabiliy. The ST 45 is available The ST 145 is a fully programmable, single channel power source with pressure/vacuum
with the Universal Soldering Iron (PS-90) or as a power source only (PSO) so you can choose the appropriate handpiece. capability. It is sold as a power source only so you can choose the right tools for your job!
See Chart on Page 15 for compatible handpieces. See Chart on Page 15 for compatible handpieces.

ST 45 SPECIFICATIONS ST 45 shown with PS-90 Iron ST 145 SPECIFICATIONS ST 145 shown with SX-80 Sodr-X-Tractor

Part Numbers 8007-0447 ST 45 w/ PS-90 Part Numbers 8007-0423 ST 145 (PSO)

8007-0448 ST 45E w/ PS-90 8007-0424 ST 145E (PSO)
8007-0443 ST 45 PSO Power Requirements: 97-127 VAC, 50/60 Hz, 120 Watts max.
8007-0444 ST 45E PSO 197-253 VAC, 50/60 Hz, 120 Watts max.
Power Requirements: 97-127 VAC, 50/60 Hz, 90 Watts max. Dimensions: 134mm H x 260mm W x 248mm D (5.25" H x 10.25" W x 9.75" D)
197-253 VAC, 50/60 Hz, 80 Watts max. Weight: 4.2Kg (9.25lbs.)
Dimensions: 104mm H x 130mm W x 152mm D (4.1" H x 5.1" W x 6.0" D) Tip to ground resistance: 2 ohms or less
Weight: 2.3 Kg (5 lbs.) Temperature Stability: ± 1.1°C (± 2 °F) at idle tip temp.
ST 145 FEATURES
Tip to ground resistance: 2 ohms or less Absolute Temperature Stability Meets or exceeds ANSI-J-STD
Digital control with LED
Temperature Stability: ± 1.1°C (± 2 °F) at idle tip temp. Temperature Range: 176°to 482°C (350°to 900°F) nominal display and keypad
Absolute Temperature Stability Meets or exceeds ANSI-J-STD ST 45 FEATURES °C/°F display options
Digital control with LED
Temperature Range: 176°to 482°C (350°to 900°F) nominal Password temperature lockout
display and keypad
Temperature Setback & Auto-Off
°C/°F display options
An optional mounting bracket (P/N 1321-0609-P1) is available for the ST 25 & ST 45 to User definable operating
mount the power source under a work-bench or shelf,preserving precious bench top space. Password temperature lockout
temperature range
Temperature Setback & Auto-Off
Hi-Flo Pump with Patented
User definable operating
Snap-Vac Technology
temperature range
Lo-Flo Pump

16 www.paceworldwide.com www.paceworldwide.com 17
 CONDUCTIVE SYSTEMS & POWER SOURCES CONVECTIVE SYSTEMS
TEK-LINK
Tek-Link is a unique integration feature that Convective systems use Hot Air to reflow Systems! Convective systems are ideal for type and other factors. For high mass
gives maximum flexibility to conductive solder joints and are often thought of as removing Surface Mount Components as applications and for components without
ST systems. Tek-Link allows the Hi-Flo pump a “safer” method for removing and installing they leave little residual solder on the PCB visible leads, it is strongly recommended
in the ST 125/ST 145 to be activated by the components from PCBs because of the when compared to conductive techniques. that a preheater and PCB holder be used
handpiece switch while plugged into the non-contact process. These systems use a They are also appropriate for installing in conjunction with the convective system
ST 25/ST 45 system. For example, when pump to generate airflow that first passes leaded components with solder paste to ensure thorough heating and to eliminate
a Tek-Link cable (1332-0252-P1) is installed through a heater, where it is warmed to the and for installing components without visible PCB damage and warping. Sodr-Tek is
between an ST25/45 and an ST125/145, appropriate temperature, and then through leads, such as BGAs, MLFs, LGAs, and LCCs. pleased to offer three systems to meet your
handpieces that require airflow or vacuum a nozzle that “shapes” the air stream for the The ideal system and accessory items exacting specifications. Please refer to the
from the Hi-Flo pump can be powered by specific component. More than 75 different depend on the application, component table below to assist with system selection.
the ST 25/ST 45 while the air connection is nozzles are available for Sodr-Tek sensitivity, component
plugged into the Hi-Flo pump on the ST 125/
ST 145. Up to three single channel systems
can be connected to one ST 125/ST 145 CONVECTIVE SYSTEM SELECTION CHART
using Tek-Link with the optional Tek-Link Applications ST 300 ST 325 ST 350
Multiplex Box (6000-0286-P1) Optional Teklink Multiplex Box
Standard Pitch Component Removal
Fine Pitch Component Removal
SNAP-VAC TECHNOLOGY Standard Pitch Area Array Component Removal
Snap-Vac technology is a patented feature that assures the fastest rise time when desoldering which ensures that 1) all of the molten
solder is pulled from the joint and 2) that it is pulled back into the collection chamber before it solidifies to prevent tip clogging. Fine Pitch Area Array Component Removal
Standard Pitch Component Installation
Fine Pitch Component Installation
SNAP-VAC TECHNOLOGY - VACUUM RISE TIME
Standard Pitch Area Array Component Installation
MAX Fine Pitch Area Array Component Installation

SAME STATIC
INCHES OF Hg

HEAD OF
PACE’s VACUUM
QUICK-RISE VACUUM
with Snap-Vac Technology COMPETITOR's
SLOW -RISE VACUUM
without Snap-Vac Technology
4

MILLISECONDS
20 100 200 300 400

MAXIMIZING TIP LIFE…

PACE recommends the following practices to maximize tip life.
1. Always use the lowest possible temperatures while soldering. High temperatures
cause tips to oxidize faster, which reduces heat transfer and damages the protective
iron plating.
2. Avoid aggressive fluxes whenever possible. Aggressive fluxes erode tips faster;
shortening their useful life.
3. Always use a properly sized tip for the work. Tips that are too small, will wear out
faster and tips that are too large will wear unevenly which, in turn, will change the
tip geometry rendering it useless.
4. Always tin tips when not in use and after cleaning on a damp sponge. A coating
of solder will prevent oxidation from forming which causes tips to lose their tinning
or wetting capability.
5. Always feed solder wire into the heated work, not the tip. Feeding solder directly into Should tips lose their tinning or wetting
the tip will cause pin-holes in the tip and will cause the flux in the solder wire to be capability, a tip cleaner such as Sodr-Tek’s
burned off before it can activate and prepare the surfaces being soldered. Tip-Brite may be used to restore them. ST 300 reflowing a PLCC ST 350 Reflowing a BGA Component

18 www.paceworldwide.com www.paceworldwide.com 19
 CONVECTIVE SMT SYSTEMS CONVECTIVE SMT SYSTEMS
LOW COST HOT AIR REFLOW SYSTEM DIGITAL PROGAMMABLE HOT AIR REFLOW SYSTEM
The ST 300 is the simplest and least costly Additionally, the system comes with the Lo-Flo The ST 325 is a digital, self-contained system space. The capabilities of the ST 325 can The system can install standard BGA
system. The ST 300 can be used to remove pump and the vacuum wand (PV -65) for that is fully programmable and can be used be used to remove or install just about any packages when fitted with the ST 500, ST
any SMD and for installing components manipulating components manually. The to remove or install surface mount type of standard pitch surface mount 525 or ST 550, ST 450 or ST 400, and
with a limited number of leads that can capabilities of the ST 300 can be greatly components when individual or multiple component when the optional Pocket PC, PC,
be positioned manually. The ST 300 is enhanced when coupled with the ST 500, ST operations are to be run. From the front coupled with the or laptop software.
a self-contained system with analog (dial) 525, or ST 550. Optional Nozzle Storage panel, the system can be used in either ST 500, ST 525, Area array components
controls for temperature and airflow. The Rack 6019-0072-P1, holds 13 nozzles. manual or “timed” modes. Manual mode or ST 550. are aligned using a proven,
heavy-duty, durable metal housing ensures means that the system generates heated reliable template method
years of service and the sloped face of the airflow when the cycle button is pressed; When additional that is easy to use.
front panel is a standard feature for ease when it is pressed a second time the system programming
of use. Other ST systems can be stacked shuts off. “Timed” modes allow the operator capability is
on to the ST 300 to preserve bench space. to create up to 20 “Profiles” that consist required, such
Both cycle start and vacuum functions are of time and temperatures parameters to as 4 zone profile
activated with conveniently located switches ensure process control and repeatability. creation, an optional
on the handpiece. The ST 300 features the Both cycle start and vacuum functions are software package
Quiet-Flo turbine for close to silent operation. activated with conveniently located switches is available that can be
ST 300 ST 300 Front Panel
on the handpiece. used with a Pocket PC, PC,
or laptop (1199-0019-P1). The
FEATURES SPECIFICATIONS The ST 325 comes standard with one optional software package
Lockable Temperature and K-type thermo-couple input that can be used further allows the ST 325 to
Part Numbers 8007-0427 ST 300 to monitor the thermal environment at the control the ST 450 ST 325
Airflow adjustment knobs
8007-0428 ST 300E work site with optional software. The Preheater when bottom side
Automatic shut off for safety
system also comes with the Lo-Flo pump heating of the PCB is required.
Functional LED Indicator lights Power Requirements: 97-127 VAC, 50/60 Hz, 575 Watts max. and the vacuum wand (PV -65) for Once the 4 zone profiles have been created
on front panel manipulating components manually. with the software, they can be downloaded
197-253 VAC, 50/60 Hz, 575 Watts max.
Quiet-Flo turbine blower reduces The heavy-duty, durable metal housing to the ST 325 and can be run WITHOUT
operating noise Dimensions: 134mm H x 245mm W x 264mm D (5.25" H x 10" W x 10.4" D)
ensures years of service and the sloped face the Pocket PC, PC, or laptop being
Hi-Flo Vacuum Pump for holding Weight: 4.3Kg (9.5lbs.) of the front panel is a standard feature for connected!
component securely Temperature Control: Closed loop temperature control ease of use. Other ST systems can be
Lo-Flo Vacuum Pump for component wand stacked on to the ST 325 to preserve bench
Temperature stability: ± 9°C (± 15 °F) at idle tip temp.
ST 325 Front Panel
Temperature Range: 176°to 482°C (350°to 900°F) nominal FEATURES SPECIFICATIONS
Airflow: 5-22 slpm Multi-level password lock-out prevents
unauthorized changes Part Numbers 8007-0429 ST 325

DO YOU HAVE TIME TO WASTE? User definable temperature zone 8007-0432 ST 325E
Audible countdown timer for end of cycle Power Requirements: 97-127 VAC, 50/60 Hz, 575 Watts max.
The handpeice features the only "Quick Fit Nozzle Adaptor" available anywhere. indication in the Timed and Program modes
This unique feature allows nozzles to be fitted or replaced in a snap, without struggling 197-253 VAC, 50/60 Hz, 575 Watts max.
On-screen display of parameters
with a screwdriver and hot heater. Dimensions: 134mm H x 245mm W x 264mm D (5.25" H x 10" W x 10.4" D)
(temperature, time) during operation
Minutes with Competitor's inferior nozzle installation method Store and recall up to 20 profiles Weight: 4.5Kg (9.9lbs.)
(40 with optional software) Temperature Control: Closed loop, digital temperature control
Quiet-Flo turbine blower offers nearly
Temperature Stability: ± 9°C (± 15 °F) at idle tip temp.
silent operation
Hi-Flo Vacuum Pump for holding Temperature Range: 176°to 482°C (350°to 900°F) nominal
component securely Airflow: 5-22 slpm
Lo-Flo Vacuum Pump for component wand

Competitors inferior nozzle Patented, Adjustable, Spring Loaded

connecting method Vacuum Pik - The handpiece is fitted with
Seconds with PACE's QuickFit Nozzle Adapter System an adjustable, spring loaded vacuum pik to
lift components from the PCB and to hold the
component in the nozzle during alignment.
The “give” in the spring loading is set, but
the absolute position of the vacuum pik
is adjustable over a 1.5” length.

PACE's QuickFit Nozzle

Adaptor System Patented, Adjustable, Spring Loaded vacuum Pik

20 www.paceworldwide.com www.paceworldwide.com 21
 CONVECTIVE SMT SYSTEMS CONVECTIVE SMT SYSTEMS
The reflow head features Theta rotation for When additional programming capability
ST 350 CONVECTIVE REWORK CENTER alignment, Z axis motion as well as Y axis is required, such as 4 zone profile creation
The ST 350 is the ultimate in cost effective, motion so the reflow head can be moved for area array components, an optional
programmable, convective rework safely out of the way so it doesn’t interfere software package is available that can
equipment. No other system on the market with the operator’s ability to see while the be used with a Pocket PC, PC, or laptop
at the same price level can compete! component land site is being dressed, (1199-0019-P1). The optional software
The system is completely self-contained and cleaned, or inspected. The standard PCB package further allows the ST 350 to control
is capable of installing virtually any type holder is capable of holding a PCB that is the ST 450 Preheater when bottom side
of surface mount component. The system 457mm X 457mm (18” x 18”) and has heating of the PCB is required. Up to three
is ideal for service centers, prototyping micrometer adjustments in the X and Y preheaters (any combination of ST 400s
shops, low volume production or directions for easy alignment. and ST 450s) can be placed under the PCB
remanufacturing centers that want to holder. After 4 zone profiles have been
purchase a single piece of equipment The ST 350 features the Quiet-Flo turbine created with the optional software, they
that can handle just about anything! ST 350 Reflowing BGA 225 and has one K-type thermo-couple input that can be downloaded to the ST 350 and can
can be used to monitor the thermal be run WITHOUT the Pocket PC, PC,
The ST 350 has all of the process control environment at the work site with optional or laptop being connected! Area array
built into the unit and boasts digital controls software. Additionally, the system comes components are aligned using a proven,
for temperature, time, and airflow. The standard with the Lo-Flo pump and the reliable template method that is easy to use.
electronic controls are fully integrated and vacuum wand (PV -65) for manipulating
are simple to use and program to meet your components manually.
needs, unlike the “off the shelf PID control
SPECIFICATIONS
modules” used on competitive equipment.
This means that you can “set it and forget it” Part Numbers 8007-0437 ST 350
instead of being tied to the unit to perform
tasks during the process which can be more 8007-0438 ST 350E
than 6 minutes long! Your time can be better Power Requirements: 97-127 VAC, 50/60 Hz, 575 Watts max.
spent preparing for the next operation 197-253 VAC, 50/60 Hz, 575 Watts max.
than waiting to activate non-intergrated
control modules. Dimensions: 578mm H x 930mm W x 665mm D (22.75" H x 36.75" W x 26.25" D)
Weight: 26.4Kg (58lbs.)
From the front panel, the system can be used in either
Temperature Control: Closed loop, digital temperature control
manual or “timed” modes. Manual mode means that the system
generates airflow when the cycle button is pressed the first time. Temperature Stability: ± 9°C (± 15 °F) at idle tip temp.
When pressed a second time, the system shuts off. “Timed” modes Temperature Range: 176°to 482°C (350°to 900°F) nominal
allow the operator to set up “Profiles” that consist of time and temperature Airflow: 5-22 slpm
parameters to ensure process control and repeatability. All of the interface
controls for the ST 350 are also located in a remote control box that can be FEATURES
placed on either side of the unit for maximum convenience to the operator. Multi-level password lock-out prevents unauthorized changes
User definable temperature zone
ST 350
Audible countdown timer for end of cycle indication in the Timed and Program modes
Store and recall up to 20 profiles (40 with optional software)
Quiet-Flo turbine blower offers nearly silent operation
On-screen display of parameters (temperature, time) during operation

FEATURED ITEMS Integrated PCB holder with micrometer adjustments.

Reflow head moves back and out Fast and repeatable nozzle height PACE UNIQUE FEATURE (Twist) PACE UNIQUE FEATURE
of the way to give you clear PCB adjustment with mechanical stop Simple coplanarity adjustment allows Simple coplanarity adjustment allows
access for board prep and clean up. for consistency of process. for extract nozzle adjustment, much for extract nozzle adjustment, much BGA alignment is easy with PACE’s proven ST 350 holding QFP component ST 350 holding BGA component
better than fixed head systems. better than fixed head systems. template alignment method.

22 www.paceworldwide.com www.paceworldwide.com 23
 CONVECTIVE SYSTEM NOZZLES CONVECTIVE SYSTEM NOZZLES
THESE NOZZLES ARE FOR USE WITH THE ST 300, ST 325 & ST 350 PATTERN NOZZLES COMPONENT TYPE JET SPACING JET LENGTH PART NUMBER
BGA NOZZLES COMPONENT BGA SIZE (NOMINAL) PART NUMBER SOIC- 8 (JEDEC) 4.1mm (0.16") 6.1mm (0.24") 4028-4001
BGA-204/225/256/ 27mm x 27mm (1.1" x 1.1") 4028-5001 SOIC-14/16 (JEDEC) 4.1mm (0.16") 10.9mm (0.43") 4028-4002
272/292/320/324 SOICL -16 (JEDEC) 7.9mm (0.31") 10.9mm (0.43") 4028-4003
BGA-169/168 23mm x 23mm (0.91" x 0.91") 4028-5002 SOICL -20 (JEDEC) 7.9mm (0.31") 13.5mm (0.53") 4028-4004
BGA-313/352 35mm x 35mm (1.38" x 1.38") 4028-5003 SOICL -24 (JEDEC) 7.9mm (0.31") 16mm (0.63") 4028-4005
BGA-144 13mm x 13mm (0.51" x 0.51") 4028-5004 SOICL -28 (JEDEC) 7.9mm (0.31") 18.5mm (0.73") 4028-4006
BGA-121/196 15mm x 15mm (0.59" x 0.59") 4028-5005 SOICL -32 (JEDEC) 11.68mm (0.46") 20.83mm (0.82") 4028-4007
BGA-86 16.25mm x 17.75mm (0.64" x 0.70") 4028-5006 TSOP-48 (Type I) 18.6mm (0.734") 18.6mm (0.734") 4028-4505
BGA-68 13.45mm x 14.97mm (0.53" x 0.59") 4028-5007 TSOP-32/40/44/50 (Type II) 10.4mm (0.41") 21.35mm (0.84") 4028-4506
BGA-32 10.42mm x 10.42mm (0.41" x 0.41") 4028-5008 SINGLE JET NOZZLES SHAPE OF JET TUBE NOZZLE SIZE (NOMINAL) PART NUMBER
BGA-40/44 11.97mm x 13.21mm (0.47" x 0.52") 4028-5009 Curved, Round 3.0mm diameter (0.1" diameter) 4028-1001
BGA-18 8.64mm x 8.90mm (0.34" x 0.35") 4028-5010 Curved, Round 5.0mm diameter (0.2" diameter) 4028-1002
BGA-292/357/361 25mm x 25mm (0.99" x 0.99") 4028-5011 Curved, Round 8.0mm diameter (0.3" diameter) 4028-1003
BGA-421/432/736 40mm x 40mm (1.57" x 1.57") 4028-5012 Straight, Round 3.0mm diameter (0.01" diameter) 4028-1011
BGA-560 42.5mm x 42.5mm (1.67" x 1.67") 4028-5013 Straight, Round 5.0mm diameter (0.2" diameter) 4028-1012
BGA-240/304/432 31mm x 31mm (1.22" x 1.22") 4028-5014 Straight, Round 8.0mm diameter (0.3" diameter) 4028-1013
BGA-256 17mm x 17mm (0.67" x 0.67") 4028-5015 Flat Jet 13.21mm length (0.52") 4028-1021
BGA-252/255/256 21mm x 21mm (0.83" x 0.83") 4028-5016 Flat Jet 23.37mm length (0.92") 4028-1022
BGA (Short Adpt.) 21mm x 21mm (0.83" x 0.83") 4028-5017 BOX NOZZLES COMPONENT TYPE NOZZLE SIZE (NOMINAL) PART NUMBER
BGA-479/493/584 37.5mm x 37.5mm (1.48" x 1.48") 4028-5018 PLCC 32.5mm x 46.5mm (" x ") 4028-1501
BGA-96/121 19mm x 19mm (0.75" x 0.75") 4028-5019 PLCC-18 (Non Baffled) 8.5mm x 12.1mm (0.34" x 0.48") 4028-2001
BGA-240/324 32mm x 32mm (1.26" x 1.26") 4028-5020 PLCC-20 (Non Baffled) 10.2mm x 10.2mm (0.40" x 0.40") 4028-2002
BGA-256/400 29mm x 29mm (1.14" x 1.14") 4028-5021 PLCC-28 (Non Baffled) 12.8mm x 12.8mm (0.50" x 0.50") 4028-2003
BGA-100 16mm x 16mm (0.63" x 0.63") 4028-5022 PLCC-32 (Non Baffled) 12.8mm x 15.3mm (0.50" x 0.60") 4028-2004
BGA-119 22mm x 14mm (0.87" x 0.55") 4028-5023 PLCC-44 (Non Baffled) 17.9mm x 17.9mm (0.70" x 0.70") 4028-2005
BGA-169 19.25mm x 19.25mm (0.76" x 0.76") 4028-5024 PLCC-52 20.4mm x 20.4mm (0.80" x 0.80") 4028-2006
BGA-196 18.5mm x 18.5mm (0.73" x 0.73") 4028-5025 PLCC-68 25.5mm x 25.5mm (1.01" x 1.01") 4028-2007
BGA-240 26.4mm x 26.4mm (1.04" x 1.04") 4028-5026 PLCC-84 30.6mm x 30.6mm (1.20" x 1.20") 4028-2008
BGA-256 30mm x 30mm (1.18" x 1.18") 4028-5027 PLCC-100 38.9mm x 38.9mm (1.53" x 1.53") 4028-2009
BGA-475 25mm x 32.3mm (0.98" x 1.27") 4028-5028 QFP-80/100 18.1mm x 24.1mm (0.71" x 0.95") 4028-2501
BGA-521 43mm x 43mm (1.69" x 1.69") 4028-5029 QFP-64/80 (Non Baffled) 17.0mm x 17.0mm (0.67" x 0.67") 4028-2502
BGA-540 44mm x 44mm (1.73" x 1.73") 4028-5030 QFP-132 26.9mm x 26.9mm (1.06" x 1.06") 4028-2503
BGA-625 32.5mm x 32.5mm (1.28" x 1.28") 4028-5031 QFP-160 31.9mm x 31.9mm (1.26" x 1.26") 4028-2504
BGA-169 22mm x 22mm (0.87" x .87") 4028-5032 QFP-208 31.5mm x 31.5mm (1.24" x 1.24"") 4028-2505
BGA-361 33mm x 33mm (1.29" x 1.29") 4028-5033 QFP-240 34.6mm x 34.6mm (1.36" x 1.36") 4028-2506
BGA-720 47.5mm x 47.5mm (1.87" x 1.87") 4028-5034 BQFP-100 23.5mm x 23.5mm (" x ") 4028-2507
BGA-303 21mm x 25mm (0.83" x 0.98") 4028-5035 BQFP-84 20.9mm x 20.9mm (" x ") 4028-2508
BGA (Short Adpt.) 17mm x 17mm (0.67" x 0.67") 4028-5036 BQFP-132 27.1mm x 27.1mm (1.07" x 1.07") 4028-2602
BGA (Small Cup) 21mm x 21mm (0.83" x 0.83") 4028-5037 TQFP-32 (Non Baffled) 11.5mm x 11.5mm (0.453" x 0.453") 4028-3002
Micro BGA-48 7.75mm x 5.6mm (0.31" x 0.22") 4028-5501 TQFP-120 (Non Baffled) 15.5mm x 15.5mm (0.610" x 0.610") 4028-3004
Micro BGA-48 7.85mm x 6.40mm (0.31" x 0.25") 4028-5502 TQFP-48 18.6mm x 18.6mm (0.734" x 0.734") 4028-4505

Cannot find the right nozzle for your application? Give us a call, we make custom nozzles!

24 www.paceworldwide.com www.paceworldwide.com 25
 STENCILS for Area Array Components REBALLING KITS
COMPONENT STENCILING - Stencils require Universal Bracket Kit, 6993-0248 BGA REBALLING KITS
OPTIONAL STENCILS PART NUMBER OPTIONAL STENCILS PART NUMBER REBALLING KIT PART NUMBER REBALLING KIT PART NUMBER REBALLING KIT PART NUMBER
Stencil, 11mm x 8mm x 88 1011-0088-P1 Stencil, 40mm x 40mm x 520 1040-0520-P1 Kit, Reballer BGA 36 4017-0001-P1 Kit, Reballer UBGA 256 4017-0038-P1 Kit, Reballer BGA 560 4017-0074-P1
Stencil, 11mm x 8mm x 69 1011-0069-P1 Stencil, 40mm x 40mm x 596 1040-0596-P1 Kit, Reballer BGA 40 4017-0002-P1 Kit, Reballer BGA 256 4017-0039-P1 Kit, Reballer SBGA 560 4017-0075-P1
Stencil, 11mm x 8mm x 72 1011-0072-P1 Stencil, 40mm x 40mm x 680 1040-0680-P1
Kit, Reballer FPBGA 44 4017-0003-P1 Kit, Reballer BGA 257 4017-0040-P1 Kit, Reballer BGA 564 4017-0076-P1
Stencil, 12mm x 12mm x 144 1012-0144-P1 Stencil, 16.5mm x 8mm x 52 1016-0052-P1
Kit, Reballer UBGA 46-33MB 4017-0004-P1 Kit, Reballer PBGA 272 4017-0041-P1 Kit, Reballer CBGA 575 4017-0077-P1
Stencil, 12mm x 12mm x 160 1012-0160-P1 Stencil, 11.4mm x 5.1mm x 22 1011-0022-P1
Stencil, 13mm x 13mm x 144 1013-0144-P1 Kit, Reballer UBGA 46-16MB 4017-0005-P1 Kit, Reballer BGA 272 4017-0042-P1 Kit, Reballer PBGA 600 4017-0078-P1
Stencil, 33mm x 33mm x 503 1033-0503-P1
Stencil, 13mm x 13mm x 64 1013-0064-P1 Stencil, 16mm x 16mm x 209 1016-0209-P1 Kit, Reballer BGA 48 4017-0008-P1 Kit, Reballer BGA 292 4017-0043-P1 Kit, Reballer SBGA 600 4017-0079-P1
Stencil, 15mm x 15mm x 156 1015-0156-P1 Stencil, 14mm x 22mm x 119 1014-0119-P1 Kit, Reballer UBGA 62 4017-0009-P1 Kit, Reballer BGA 304 4017-0044-P1 Kit, Reballer TBGA 696 4017-0080-P1
Stencil, 15mm x 15mm x 160 1015-0160-P1 Stencil, 42.5mm x 32.5mm x 824 1042-0824-P1 Kit, Reballer FPBGA 64 4017-0010-P1 Kit, Reballer BGA 313 4 017-0046-P1 Kit, Reballer BGA 100 4017-0081-P1
Stencil, 15mm x 15mm x 196 1015-0196-P1 Stencil, 32.5mm x 25mm x 474 1032-0474-P1 Kit, Reballer FPBGA 69 4017-0011-P1 Kit, Reballer BGA 320 4017-0047-P1 Kit, Reballer LFBGA 100 4017-0082-P1
Stencil, 17mm x 17mm x 208 1017-0208-P1 Stencil, 4mm x 4mm x 16 1004-0016-P1
Kit, Reballer BGA 69 4017-0012-P1 Kit, Reballer TFBGA 324 4017-0048-P1 Kit, Reballer TFBGA 48 4017-0083-P1
Stencil, 17mm x 17mm x 256 1017-0256-P1 Stencil, 4mm x 4mm x 20 1004-0020-P1
Kit, Reballer FPBGA 72 4017-0013-P1 Kit, Reballer BGA 325 4017-0049-P1 Kit, Reballer BGA 233 4017-0084-P1
Stencil, 19mm x 19mm x 52 1023-0052-P1 Stencil, 5mm x 4mm x 24 1005-0024-P1
Stencil, 19mm x 19mm x 225 1023-0256-P1 Kit, Reballer LFPBGA 84 4017-0014-P1 Kit, Reballer BGA 348 4017-0050-P1 Kit, Reballer TFBGA 64 4017-0085-P1
Stencil, 4mm x 4mm x 24 1004-0024-P1
Stencil, 19mm x 19mm x 163 1023-0163-P1 Stencil, 4mm x 4mm x 28 1004-0028-P1 Kit, Reballer BGA 100 4017-0015-P1 Kit, Reballer BGA 352 4017-0051-P1 Kit, Reballer BGA 177 4017-0086-P1
Stencil, 19mm x 19mm x 289 1023-0289-P1 Stencil, 32.5mm x 32.5mm x 624 1032-0624-P1 Kit, Reballer BGA 108 4017-0016-P1 Kit, Reballer SPBGA 352 4017-0052-P1 Kit, Reballer BGA 169/2 4017-0087-P1
Stencil, 23mm x 23mm x 169 1023-0169-P1 Stencil, 32.5mm x 32.5mm x 937 1032-0937-P1 Kit, Reballer BGA 119 4017-0017-P1 Kit, Reballer SBGA 352 4017-0053-P1 Kit, Reballer LFBGA 80 4017-0088-P1
Stencil, 23mm x 23mm x 192 1023-0192-P1 Stencil, 31mm x 31mm x 304 1031-0304-P1 Kit, Reballer BGA 131 4017-0018-P1 Kit, Reballer TBGA 352 4017-0054-P1 Kit, Reballer TFBGA 48 4017-0089-P1
Stencil, 23mm x 23mm x 288 1023-0288-P1 Stencil, 8mm x 8mm x 64 1008-0064-P1
Kit, Reballer BGA 144 4017-0019-P1 Kit, Reballer BGA 356 4017-0055-P1 Kit, Reballer TFBGA 64 4017-0090-P1
Stencil, 23mm x 23mm x 324 1023-0324-P1 Stencil, 31mm x 31mm x 316 1031-0316-P1
Kit, Reballer UBGA 144 4017-0021-P1 Kit, Reballer PBGA 357 4017-0056-P1 Kit, Reballer LFBGA 64 4017-0091-P1
Stencil, 23mm x 23mm x 208 1023-0208-P1 Stencil, 31mm x 31mm x 329 1031-0329-P1
Stencil, 23mm x 23mm x 256 1023-0256-P1 Stencil, 15mm x 13mm x 165 1015-0165-P1 Kit, Reballer BGA 168 4017-0022-P1 Kit, Reballer CBGA 360 4017-0058-P1 Kit, Reballer LFBGA 144 4017-0092-P1

Stencil, 23mm x 23mm x 484 1023-0484-P1 Stencil, 8mm x 10mm x 48 1008-0048-P1 Kit, Reballer BGA 169 4017-0023-P1 Kit, Reballer BGA 388 4017-0059-P1 Kit, Reballer LFBGA 132 4017-0093-P1
Stencil, 25mm x 25mm x 357 1025-0357-P1 Stencil, 5mm x 5mm x 32 1005-0032-P1 Kit, Reballer BGA 180 4017-0024-P1 Kit, Reballer BGA 400 4017-0060-P1 Kit, Reballer TFBGA 168 4017-0094-P1
Stencil, 25mm x 25mm x 360 1025-0360-P1 Stencil, PLCC 28 1012-0028-P1 Kit, Reballer TBGA 192 4017-0025-P1 Kit, Reballer BGA 404 4017-0061-P1 Kit, Reballer TFBGA 100 4017-0095-P1
Stencil, 25mm x 25mm x 413 1025-0413-P1 Stencil, 15mm x 15mm x 148 1015-0148-P1 Kit, Reballer BGA 192 4017-0026-P1 Kit, Reballer BGA 421 4017-0062-P1 Kit, Reballer LFBGA 120 4017-0096-P1
Stencil, 27mm x 27mm x 352 1027-0352-P1 Stencil, 9mm x 9mm x 56 1009-0056-P1
Kit, Reballer CBGA 196 4017-0027-P1 Kit, Reballer BGA 428 4017-0063-P1 Kit, Reballer TFBGA 320 4017-0097-P1
Stencil, 27mm x 27mm x 316 1027-0316-P1 Stencil, 9mm x 9mm x 64 1009-0064-P1
Kit, Reballer UBGA 196 4017-0028-P1 Kit, Reballer PBGA 432 4017-0064-P1 Kit, Reballer BGA 241 4017-0098-P1
Stencil, 27mm x 27mm x 225 1027-0225-P1 Stencil, 6mm x 5mm x 32 1006-0032-P1
Stencil, 27mm x 27mm x 256 1027-0256-P1 Stencil, 24mm x 24mm x 241 1024-0241-P1 Kit, Reballer BGA 208 4017-0029-P1 Kit, Reballer BGA 452 4017-0066-P1 Kit, Reballer BGA 113 4017-0099-P1

Stencil, 27mm x 27mm x 272 1027-0272-P1 Stencil, 10mm x 10mm x 64LCC 1010-0064-P1 Kit, Reballer BGA 216 4017-0030-P1 Kit, Reballer BGA 456 4017-0067-P1 Kit, Reballer BGA 153 4017-0100-P1
Stencil, 27mm x 27mm x 292 1027-0292-P1 Stencil, 10mm x 10mm x 128 1010-0128-P1 Kit, Reballer BGA 217 4017-0031-P1 Kit, Reballer TBGA 480 4017-0068-P1 Kit, Reballer SBGA 652 4017-0101-P1
Stencil, 27mm x 27mm x 324 1027-0324-P1 Stencil, 6mm x 6mm x 40 1006-0040-P1 Kit, Reballer BGA 225 4017-0033-P1 Kit, Reballer BGA 480 4017-0069-P1 Solder Spheres, .020 diameter 6993-0231-P1
Stencil, 27mm x 27mm x 328 1027-0328-P1 Stencil, 10mm x 10mm x 151 1010-0151-P1 Kit, Reballer BGA 255 4017-0034-P1 Kit, Reballer BGA 492 4017-0070-P1 Solder Spheres, .025 diameter 6993-0232-P1
Stencil, 27mm x 27mm x 336 1027-0336-P1 Stencil, 7mm x 7mm x 32 1007-0032-P1
Kit, Reballer SBGA 256 4017-0035-P1 Kit, Reballer TBGA 500 4017-0071-P1 Solder Spheres, .030 diameter 6993-0233-P1
Stencil, 27mm x 27mm x 672 1027-0672-P1 Stencil, 21mm x 21mm x 156 1021-0156-P1
Kit, Reballer TBGA 256 4017-0036-P1 Kit, Reballer BGA 548 4017-0072-P1
Stencil, 27mm x 27mm x 676 1027-0676-P1 Stencil, 7mm x 7mm x 48 1007-0048-P1
Stencil, 35mm x 35mm x 388 1035-0388-P1 Stencil, 7mm x 7mm x 49 1007-0049-P1 Kit, Reballer CBGA 256 4017-0037-P1 Kit, Reballer BGA 553 4017-0073-P1

Stencil, 35mm x 35mm x 456 1035-0456-P1 Stencil, 14mm x 8mm x 63 1014-0063-P1

Stencil, 35mm x 35mm x 313 1035-0313-P1 Stencil, 7mm x 7mm x 113 1007-0113-P1
Stencil, 35mm x 35mm x 352 1035-0352-P1 Stencil, 16mm x 8mm x 60 1016-0060-P1
Stencil, 35mm x 35mm x 480 1035-0480-P1 Stencil, 45mm x 45mm x 600 1045-0600-P1
Stencil, 35mm x 35mm x 580 1035-0580-P1 Stencil, 45mm x 45mm x 731 1045-0731-P1
Stencil, 40mm x 40mm x 432 1040-0432-P1 Stencil, 42.5mm x 42.5mm x 560 1042-0560-P1
Stencil, 40mm x 40mm x 503 1040-0503-P1

26 www.paceworldwide.com www.paceworldwide.com 27
 PREHEATERS FIXTURES AND PCB HOLDERS
ST 500 adjustable Z-Axis platform ST 525 with Short Legs
ALL PREHEATERS CAN BE USED AS STAND ALONE
OR INTEGRATED WITH SYSTEMS.
Preheating allows for the use of significantly or warping, 2) it maintains the planarity of ST 400
lower and safer temperatures when the rework site, 3) it warms the PCB so heat
conductive or convective tools are used for applied by the top heater is not drawn away
component installation or removals. from the rework site, and 4) it ensures that
Preheating is also required when installing homogenous temperatures across the
area array components and large leaded package and PCB are maintained, allowing
devices. The application of heat from the use of safe, low temperatures for the
the bottom side of the PCB serves several top heater.
functions: 1) it keeps the PCB from twisting
ST 550 with Long Legs

SPECIFICATIONS
Part Numbers 8007-0427 ST 400 The ST 400 is an analog, closed loop,
temperature controlled radiant 400 W
8007-0428 ST 400E pre heater. The heating area is 140mm
When using convective hand tools, such
Power Requirements: 97-127 VAC, 50/60 Hz or, 425 Watts max. x 140mm (5.5” x 5.5”). This preheater
as the ST 300 and ST 325, it is often helpful
is ideal for heavy PCBs and for area array
197-253 VAC, 50/60 Hz 425 Watts max. to place the handpiece into a fixture that has
applications as the medium wave IR delivers
Dimensions: 105mm H x 178mm W x 318mm D (4.1" H x 7" W x 12.5" D) the ability to control the z axis movement
the most penetrating and even heating
when trying to align or place a component.
Weight: 2.3Kg (5lbs.) available. The ST 400 can be used
The ST 500 is an adjustable Z-Axis platform
as a stand-alone unit with either the
Temperature Stability: ± 3°C (± 5 °F) at idle tip temp. that accepts the handpiece from either the
ST 525/ST 550 PCB holder or can be
ST 300 or ST 325. The heat guard on the
Absolute Temperature Stability: Meets or exceeds ANSI-J-STD used with the ST 300, ST 325, or ST 350.
handpiece is replaced with a “swivel ring”
Temperature Range: 37-205˚C (100-400˚F) which is placed on the ST 500. The swivel
ring allows the handpiece to be adjusted for SPECIFICATIONS
planarity to the PCB being worked on. The
ST 500 features a sturdy, extruded base that Free Standing PCB Holders 6993-0258-P1 ST 500
The ST 450 is an analog, closed loop, after the application of heat such as area ST 450 will accommodate either the ST 400 or Part Numbers 6993-0253-P1 ST 525
temperature controlled convective 1500 W array applications. Additionally, the nature ST 450 preheater and can also be used with 6993-0254-P1 ST 550
preheater. The heating area is 140mm x of hot air allows heat to get into those hard either of the PCB holders (ST 525 or ST 550).
140mm (5.5” x 5.5”). This preheater is ideal to reach places all too common on today’s ST 525 holds PCB’s up to: 305mm X 305 mm (12” x 12”)
for applications where focused hot air is electronics. ST 550 holds PCB’s up to: 460mm X 460 mm (18” X 18”)
desirable or where cooling air is required
Capabilities: Both come with short legs for bench-top use and with extended
legs for use with either the ST 400 or ST 450 preheaters.

SPECIFICATIONS If you prefer your work to be angled, use two long legs in the back and 2 short legs in the front! These fixtures are ideal for prep-work, cutting
leads, soldering, desoldering, inspection, and testing. Both feature spring loaded rails with cocking mechanism for easy PCB removal and insertion.
Part Numbers 8007-0433 ST 450 The ST 450 can be used as is, or one of 3 A very flexible system can be created by combining the ST 500 with either PCB holder and the ST 300/ST 325 and the ST 400/ST 450.
“air wash” nozzles can be attached to focus
8007-0434 ST 450E the heat where it is needed. The ST 450 can
be used as a stand-alone unit with either the ST 550 shown with optional ST 450 ST 500 with optional
Power Requirements: 97-127 VAC, 50/60 Hz or, 1500 Watts max. ST 325, ST 450 and ST 550
197-253 VAC, 50/60 Hz 1500 Watts max.
ST 525/ST 550 PCB holder or can be used
with the ST 300, ST 325, or ST 350. When
Dimensions: 105mm H x 178mm W x 318mm D (4.1" H x 7" W x 12.5" D) used with the ST 325/ST 350 (with the
Weight: 2.4Kg (5.3lbs.) optional software package) the heater
activity of the ST 450 can be controlled
Temperature Stability: ± 3°C (± 5 °F) at idle tip temp.
through the ST 325 or ST 350. The ST 450
Absolute Temperature Stability: Meets or exceeds ANSI-J-STD is completely self-contained and when
Temperature Range: 37-205˚C (100-400˚F) in cooling mode, the airflow is increased
to 50 cfm.
Heating Airflow 35 cfm
Cooling Airflow 50 cfm
Focus Nozzle Part Numbers 4048-0001-P1 1.5” Square Nozzle
4048-0002-P1 3” Square Nozzle
4048-0003-P1 4.5” Square Nozzle

28 www.paceworldwide.com www.paceworldwide.com 29
 DISPENSING DISPENSING CONSUMABLES
The ST 600 is a shop air based paste pulses, variable timed dispensing, and vacuum quickly! The ST 600 comes standard with Dispensing consumable products include syringe needles in multiple gauges, plastic tapered tips, syringe adapters, and barrel stoppers.
dispenser with advanced features at an pull back to eliminate the mess caused from a unique finger switch that fits most syringes
unbeatable price! No more messing around fluids leaking out of your existing dispensing which allows you to easily coordinate PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION
with inaccurate manual dispensing methods equipment. Let’s be honest, when fluids are dispensing activity with what your hand
1125-0001-P10 Needle, SS,14GA,0.5" 1125-0020-P50 Needle, SS,18GA,.1" 1125-0033-P10 Tip, Plastic,Taper,20GA
that leave patchy deposits or that rely on dispensed inconsistently or erratically, it causes is doing without using the foot pedal!
“eye balling” the correct volume being a lot of extra work for the service technician Of course, if you prefer the foot pedal 1125-0001-P50 Needle, SS,14GA,0.5" 1125-0021-P10 Needle, SS,19GA,.1" 1125-0033-P50 Tip, Plastic,Taper,20GA
deposited. because the PCB has to be cleaned before approach, this comes standard with 1125-0002-P10 Needle, SS,15GA,0.5" 1125-0021-P10 Needle, SS,20GA,.1" 1125-0034-P10 Tip, Plastic,Taper,22GA
trying again and with most of today’s PCBs the system.
1125-0002-P50 Needle, SS,15GA,0.5" 1125-0021-P50 Needle, SS,19GA,.1" 1125-0034-P50 Tip, Plastic,Taper,22GA
The ST 600 is a top of the line dispenser having vias, good luck cleaning them out
with precision dispensing capabilities such as 1125-0003-P10 Needle, SS,16GA,0.5" 1125-0021-P50 Needle, SS,20GA,.1" 1125-0035-P1 Adapter,syringe,5cc
variable air pressure, repeatable measured 1125-0003-P50 Needle, SS,16GA,0.5" 1125-0022-P10 Needle, SS,21GA,.1" 1125-0036-P1 Adapter,syringe,10cc
ST 600 1125-0004-P10 Needle, SS,17GA,0.5" 1125-0022-P5 Needle, SS,21GA,.1" 1125-0037-P1 Adapter,syringe,30cc
1125-0004-P50 Needle, SS,17GA,0.5" 01125-0023-P10 Needle, SS,22GA,.1" 1125-0038-P5 Barrel & Stopper,5cc, 5 pack
1125-0005-P10 Needle, SS,18GA,0.5" 1125-0023-P50 Needle, SS,22GA,.1" 1125-0038-P10 Barrel & Stopper,5cc, 10 pack
1125-0005-P50 Needle, SS,18GA,0.5" 1125-0024-P10 Needle, SS,23GA,.1" 1125-0039-P5 Barrel & Stopper,10cc, 5 pack
1125-0006-P10 Needle, SS,19GA,0.5" 1125-0024-P50 Needle, SS,23GA,.1" 1125-0039-P10 Barrel & Stopper,10cc,10 pack
1125-0006-P50 Needle, SS,19GA,0.5" 1125-0025-P10 Needle, SS,24GA,.1" 1125-0040-P5 Barrel & Stopper,30cc, 5 pack
1125-0007-P10 Needle, SS,20GA,0.5" 1125-0025-P50 Needle, SS,24GA,.1" 1125-0040-P10 Barrel & Stopper,30cc,10 pack
1125-0007-P50 Needle, SS,20GA0,.5" 1125-0026-P10 Needle, SS,25GA,.1" 1125-0067-P5 Luer Lock Tip Cap, Pack 5
1125-0008-P10 Needle, SS,21GA,0.5" 1125-0026-P50 Needle, SS,25GA,.1" 1125-0067-P10 Luer Lock Tip Cap, Pack 10
1125-0008-P50 Needle, SS,21GA,0.5" 1125-0027-P10 Needle, SS,26GA,.1" 1125-0068-P5 Flex Cap for Taper Tip Pack 5
1125-0009-P10 Needle, SS,22GA,0.5" 1125-0027-P50 Needle, SS,26GA,.1" 1125-0068-P10 Flex Cap for Taper Tip Pack 10
The ST 600 is ideal for applying solder paste, gel fluxes, underfill, potting compounds, or epoxies. Regardless of generous or micro-dot 1125-0009-P50 Needle, SS,22GA,0.5" 1125-0028-P10 Needle, SS,27GA,.1" 1125-0069-P5 Needle Cover Cap, Pack 5
application, the ST 600 will increase your productivity and reduce waste! The ST 600 can be used as a stand alone system and can also
be integrated into the ST 350 for the ultimate in convective rework systems! 1125-0010-P10 Needle, SS,23GA,0.5" 1125-0028-P50 Needle, SS,27GA,.1" 1125-0069-P10 Needle Cover Cap, Pack 10
1125-0010-P50 Needle, SS,23GA,0.5" 1125-0029-P10 Needle, SS,30GA,.1" 1125-0070-P5 3cc Manual Syringe, Pack 5
SPECIFICATIONS 1125-0011-P10 Needle, SS,24GA,0.5" 1125-0029-P50 Needle, SS,30GA,.1" 1125-0070-P10 3cc Manual Syringe, Pack 10
Part Numbers 8007-0439 ST 600 1125-0011-P50 Needle, SS,24GA,0.5" 1125-0030-P10 Tip, Plastic,Taper,14GA 1125-0071-P5 5cc Manual Syringe, Pack 5
8007-0440 ST 600E 1125-0012-P10 Needle, SS,25GA,0.5" 1125-0030-P50 Tip, Plastic,Taper,14GA 1125-0071-P10 5cc Manual Syringe, Pack 10
Power Requirements: 97-127 VAC, 50/60 Hz, 90 Watts max. 1125-0012-P50 Needle, SS,25GA,0.5" 1125-0031-P10 Tip, Plastic,Taper,16GA 1125-0072-P5 10cc Manual Syringe, Pack 5
197-253 VAC, 50/60 Hz, 80 Watts max. 1125-0013-P10 Needle, SS,26GA,0.5" 1125-0031-P50 Tip, Plastic,Taper,16GA 1125-0072-P10 10cc Manual Syringe, Pack 10
Dimensions: 76mm H x 254mm W x 208mm D (3" H x 10" W x 8.15" D) 1125-0013-P50 Needle, SS,26GA,0.5" 1125-0032-P10 Tip, Plastic,Taper,18GA 1125-0073-P5 1cc Manual Syringe, Pack 5
Weight: 2.5Kg (5.5lbs.) 1125-0014-P10 Needle, SS,27GA,0.5" 1125-0032-P50 Tip, Plastic,Taper,18GA 1125-0073-P10 1cc Manual Syringe, Pack 10
Air pressure requirements: 50-80 PSI 1125-0014-P50 Needle, SS,27GA,0.5"
1125-0015-P10 Needle, SS,30GA,0.5"
ST 600 integrated with ST 350 ST 600 shown with unique finger switch operation 1125-0015-P50 Needle, SS,30GA,0.5"
1125-0016-P10 Needle, SS,14GA,.1"
1125-0016-P50 Needle, SS,14GA,.1"
1125-0017-P10 Needle, SS,15GA,.1"
1125-0017-P50 Needle, SS,15GA,.1"
1125-0018-P10 Needle, SS,16GA,.1"
1125-0018-P50 Needle, SS,16GA,.1"
1125-0019-P10 Needle, SS,17GA,.1"
1125-0019-P50 Needle, SS,17GA,.1"
1125-0020-P10 Needle, SS,18GA,.1"
Dispensing Nozzels

30 www.paceworldwide.com www.paceworldwide.com 31
 FUME EXTRACTION FUME EXTRACTION
WHY IS FUME EXTRACTION NEEDED? The Sodr-Tek bench-top FX 50 fume exhauster is designed to remove solder flux fumes and other workplace fumes
from the operator’s breathing zone. Harmful fumes are drawn through an activated carbon impregnated foam filter.
It's a fact... hazardous fumes in the working environment result in increased absenteeism, employee turnover, worker's compensation claims and
lost productivity. Medical research has confirmed an increased incidence of occupational asthma, chronic bronchitis, allergic reactions, contact FEATURES
dermatitis and other health related effects associated with exposure to flux fumes. The substances in flux fumes are regulated by international High airflow fan
health and safety agencies and many have been designated as Occupational Sensitizers which means that exposure should be eliminated or Simple filter change out
reduced to as low levels as possible. Where manual soldering is being performed or where solder-pots/fountains are utilized, hazardous fumes
Variable mounting with pre-drilled holes
are produced and workers need to be protected from them.
Three height adjustments
Easy swivel action
FACT: Exposure to Solder Fumes Leads to Respiratory illness Compact
Portable
When rosin-based or rosin-containing fluxes widely and is dependent on the chemical Includes three filters
are heated, a substance called colophony composition of the flux. Non-rosin or low-
is produced, which is one of the major rosin fluxes use chemically aggressive SPECIFICATIONS
courses of occupational asthma. In order to substances such as acids, solvents, or
reduce exposure to colophony, rosin-based alcohols in place of rosin to improve the Power Requirements: Part No. 8884-0920 - 115 VAC, 50/60 Hz, 17 Watts
fluxes have been exchanged for no-clean or cleaning action of the flux. This is also Part No. 8884-0925 - 230 VAC, 50/60 Hz, 17 Watts
synthetic fluxes that contain no rosin or very true for Lead Free solders. Exposure Airflow with filter: 60m3/h (35CFM)
low percentages. While this reduces or to these substances is also recognized as
eliminates exposure to colophony, new hazardous and when flux is heated, the Dimensions: 220mm (8.7") Wide x 270mm (10.6") High x 168mm (6.6")Deep
chemical irritants may be introduced into resultant chemical by-products can be even FX 50 Weight: 1591g (3.5lbs.)
the work place, many of which pose a more more hazardous. Additionally, the use of
Exhauster housing: Static Safe Plastic
substantial threat to workers. Over 95% cleaners, solvents or adhesives, which are
of the total fume products from rosin-based common in electronic soldering applications, Activated-carbon
fluxes are in the form of particulates. expose workers to chemical hazards. impregnated foam filter: 130mm (5.1") Wide x 130mm (5.1") High x 68mm (0.4") Deep
Chemical exposure from flux fume varies
Replacement filter: Part No. 8883-0200-P5 - Package of Five Filters

The human body has been designed The Arm-Evac 50 is a unique, portable, FEATURES
PARTICULATE INHALATION RANGE with defense mechanisms such as nasal cost-effective, bench-top fume extractor Operator Adjustable Airflow
passageways lined with mucus that will that provides wide area fume extraction Plenum or Arm Extraction
SOLDER/FLUX FUME collect larger particles through a process or highly efficient source capture at up to Static Safe
known as impaction and ciliated breathing two points using the optional arm Four Levels of Fume Filtration
COAL DUST
passageways to remove foreign substances attachment. The Arm-Evac 50 features Filter Condition Monitoring
from the main airways of the lungs. Flux operator adjustable airflow, quiet operation
fumes contain high levels of respirable Incorporates utility platform
GAS and a wide variety of filter options to meet
TOBACCO SMOKE
MOLECULES particles (less than 3.5 microns in diameter the needs of virtually any application.
similar in size to cigarette smoke) that can SPECIFICATIONS
CARBON BLACK
bypass these natural defense mechanisms, Unit: Arm-Evac 50 - 8889-0050
and deposit themselves in the gas-exchange
POLLENS region of the lungs, thereby posing the Power Requirements: 115 or 230 VAC, 50/60 Hz
SOURCE: greatest exposure hazard. Size: 215mm (8.5") H x 330mm (13.0") W x 315mm (12.5") D
STANFORD RESEARCH INSECTICIDE DUST
INSTITUTE, CALIFORNIA Weight: 6 Kg (13 lbs.)
BACTERIA Sound Level*: 54 dBA
Standard Inlets: One laminar flow, plenum inlet
0.0001 0.001 0.01 0.1 1 10 100 Flow Rate: Adjustable: 152 m3/h (90 cfm) max with Plenum
PARTICLE SIZE IN MICRONS One Arm Adjustable: 84.5 m3/h (45 cfm) max
Arm-Evac 50
Two Arms Adjustable: 60 m3/h (30 cfm) max per arm
System Options: Dual Arm Accessory - 8886-0055
FACT: Material Safety Data Sheets for Fluxes Recommend Standard Filters: Pre-Filter - 8883-0125-P5
the Use of Local Exhaust Ventilation Systems General Purpose Filter - 8883-0280
Filtration Options: Clean room Filter - 8883-0290**
The Health effects caused by exposure to flux fumes tend to be forms of respiratory illness and contact dermatitis. However, since Adhesive Filter - 8883-0295**
the components of flux fume are often designated as occupational sensitizers, chronic or prolonged exposure increases the severity
Economy Filter - 8883-0300-P5**
of health effects. PACE Fume Extraction is a key element in protecting workers from being exposed to flux fume!
* Airflow and noise level are nominal
numbers and will vary based on voltage
** Pre–filter also required.

Arm-Evac 50 with Optional Dual Arm Attachment

32 www.paceworldwide.com www.paceworldwide.com 33
 FUME EXTRACTION SODR-TEK MATERIALS
The best protection from SPECIFICATIONS
harmful fumes in its price range.
The Arm-Evac 105 is portable, compact and Unit: Arm-Evac 105 - 8888-0110 SODR-TEK MATERIALS PART NUMBER FLUX CORE CORE SIZE PACKAGE SIZE
can be easily placed on or under a work- Arm-Evac 105E - 8888-0105 All purpose Electrical Rosin Core Solder 60/40 .031 dia 1125-0042-P1 44 58 8 oz
bench. The unit includes a brushless motor Power Requirements: 115 VAC, 60 Hz
and the housing is made of heavy duty, 20 All purpose Electrical No-Clean Core Solder 60/40, .031 dia 1125-0043-P1 245 66 8 oz
gauge steel. One inlet cap is provided to seal 230 VAC, 50 Hz
Dimensions: 500mm (19.6")H x 290mm (11.5")W x 290mm (11.5")D All purpose Electrical Rosin Core Solder 60/40, .5 dia 1125-0063-P1 44 58 8 oz
the unused inlet if only one flex arm is used.
Weight: 11.5 Kg (25.3 pounds) All purpose Electrical No-Clean Core Solder 60/40, .5 dia 1125-0064-P1 245 66 8 oz
Arm-Evac 105
Sound Level*: 55 dBA Sn96.5/Ag3/Cu0.5 Lead Free solder wire Rosin Core .031 Dia 1125-0044-P1 44 58 8 oz
Number of Inlets: Two 75 mm (3")
Sn96.5/Ag3/Cu0.5 Lead Free solder wire Rosin Core .050 Dia 1125-0045-P1 44 58 8 oz
General Purpose Filter: Single Inlet: 220 m3/h (130 cfm);
Sn96.5/Ag3/Cu0.5 Lead Free solder wire Acid Core .031 Dia 1125-0046-P1 Acid 66 8 oz
Dual Inlet: 118 m3/h (70 cfm) per inlet
Clean room Filter: Single Inlet: 187 m3/h (110 cfm); Sn96.5/Ag3/Cu0.5 Lead Free solder wire Acid Core .050 Dia 1125-0047-P1 Acid 66 8 oz
Dual Inlet: 105 m3/h (62 cfm) per inlet All purpose Electrical Rosin Core Solder 60/40, .31 dia 1125-0048-P1 44 58 4 oz
# of Collection Accessories: Two 75mm (3") Flex Arms All purpose Electrical No-Clean Core Solder 60/40, .31 dia 1125-0049-P1 245 66 4 oz
Maximum Duct Run: 2.5m (8') per inlet
All purpose Electrical Rosin Core Solder 60/40, .5 dia 1125-0065-P1 44 58 4 oz
Standard Filters: Pre-Filter - 8883-0111-P5
All purpose Electrical No-Clean Core Solder 60/40, .5 dia 1125-0066-P1 245 66 4 oz
General Purpose Filter - 8883-0931
Filtration Options: Clean room Filter - 8883-0921* Sn96.5/Ag3/Cu0.5 Lead Free solder wire Rosin Core .031 Dia 1125-0050-P1 44 58 4 oz
Adhesive Filter - 8883-0951* Sn96.5/Ag3/Cu0.5 Lead Free solder wire Rosin Core .050 Dia 1125-0051-P1 44 58 4 oz
Extended Life Filter - 8883-0936** Sn96.5/Ag3/Cu0.5 Lead Free solder wire Acid Core .031 Dia 1125-0052-P1 Acid 66 4 oz
Economy Filter - 8883-0871*
Sn96.5/Ag3/Cu0.5 Lead Free solder wire Acid Core .050 Dia 1125-0053-P1 Acid 66 4 oz
*Pre-filter also required **Requires Extended life Pre-Filter - 8883-0938-P10
Flux applicator Brushes 1125-0054-P5 Pack of 5
FILTER SELECTION CHART
SP 30 Acid Flux Paste 1125-0055-P1 2 Oz
Pre-Filter High Capacity Economy General Clean Room High Capacity Adhesive
Pre-Filter Filter Purpose Filter Filter Filter Filter SP-44 Rosin Flux Paste 1125-0056-P1 2 Oz

FX 50 N/A N/A 883-0200-P5 N/A N/A N/A N/A Flux Pen 951 1125-0059-P1 Pen

Arm-Evac 50 8883-0125-P5 N/A 8883-0300-P5 8883-0280 8883-0290 N/A 8883-0295 Flux Pen 186 1125-0060-P1 Pen
Arm-Evac 105 8883-0111-P5 8883-0938-P10* 8883-0871 8883-0931 8883-0921 8883-0936* 8883-0951 TSF-6522 No Clean Gel Flux 1125-0061-P1 35g syringe
* High Capacity Pre-Filters must be used in combination with a High Capacity Filter. When Filters need to be replaced, simply remove them
from the Fume Extractor and replace with a new one. Disposal of filters should be done in compliance with local environmental regulations.
TSF-6805 Water Soluble Gel Flux 1125-0062-P1 35g syringe
Tip-Brite, lead free tip tinner 1120-0016-P1 0.7 oz
ESD Safe Flex-Arm (P/N 8886-0750) - The most SPECIFICATIONS
versatile and economical collection accessory. Flux Definition Core Definition
ESD Rating: Surface Resistivity: 1.00E3 Ohm 44 = Active Rosin Flux 58 = 1.1%
ESD Safe Flex Arm Volume Resistivity: <6.00E2 Ohm-cm 245 = No Clean Flux 66 = 2.2%
Acid = Acid Based Flux
Length: 915mm (36")
Diameter: 75mm (3")
Mounting: Directly onto Fume Extractor
or uses optional Bench Mounting Bracket
Standard Endpiece: Round

ESD Safe Flex-Arm Quick-Mount Bench Mounting Bracket Kit (P/N 8886-0745) allows the
ESD Safe Flex-Arm to be mounted virtually anywhere. Quick Mount clamp allows for arm
and bracket to be repositioned in seconds. Kit includes 25m (8') of 75mm (3") ESD Safe flexible
hose. ***BEST VALUE*** ESD Safe Flex-Arm Kit (8886-0765) contains everything needed
to mount an ESD Safe Flex-Arm to a workbench. The kit includes: (1) ESD Safe Flex-Arm
(P/N 8886-0750) and (1) Quick-Mount Bench Mounting Bracket Kit (P/N 8886-0745).

34 www.paceworldwide.com www.paceworldwide.com 35
 SOLDER WICK DESOLDERING BRAID SOLDER WICK DESOLDERING BRAID
Sodr-Tek Desoldering braid is 100% copper and has a fine braid design to promote strong capillary action to remove residual solder TYPE DESCRIPTION PART NUMBER
completely. Sodr-Tek Desoldering Braid removes up to four times more solder than the conventional wick and extracts solder much
faster than competitive braids. The residue left behind is halide free and non-conductive so it does not have to be cleaned off the PCB. No-Clean Wick, 2714, 10 ft, .035” wide, white bobbin 1243-0042-P1
Sodr-Tek Desoldering Braids are available in a wide variety of sizes, with rosin and no clean fluxes, and with or without anti-static bobbins. No-Clean Wick, 2714, 25 ft, .035” wide, white bobbin
Try our Desoldering Braids today and you’ll see the difference immediately! 1243-0043-P1
No-Clean Wick, 2714, 5 ft, .035” wide, white bobbin 1243-0044-P1
TYPE DESCRIPTION PART NUMBER No-Clean Wick, 2715, 10 ft, .055” wide, yellow bobbin 1243-0045-P1
Advanced Wick, 2701, 10 ft, .035” wide, fine braid, white bobbin 1243-0008-P1 No-Clean Wick, 2715, 25 ft, .055” wide, yellow bobbin 1243-0046-P1
Advanced Wick, 2701, 25 ft, .035” wide, fine braid, white bobbin 1243-0009-P1 No-Clean Wick, 2715, 5 ft, .055” wide, yellow bobbin 1243-0047-P1
Advanced Wick, 2701, 5 ft, .035” wide, fine braid, white bobbin 1243-0010-P1 No-Clean Wick, 2716, 10 ft, .075” wide, green bobbin 1243-0048-P1
Advanced Wick, 2702, 10 ft, .055” wide, fine braid, yellow bobbin 1243-0011-P1 No-Clean Wick, 2716, 25 ft, .075” wide, green bobbin 1243-0049-P1
Advanced Wick, 2702, 25 ft, .055” wide, fine braid, yellow bobbin 1243-0012-P1 No-Clean Wick, 2716, 5 ft, .075” wide, fine green bobbin 1243-0050-P1
Advanced Wick, 2702, 5 ft, .055” wide, fine braid, yellow bobbin 1243-0013-P1 No-Clean Wick, 2717, 10 ft, .098” wide, blue bobbin 1243-0051-P1
Advanced Wick, 2703, 10 ft, .075” wide, fine braid, green bobbin 1243-0014-P1 No-Clean Wick, 2717, 25 ft, .098” wide, blue bobbin 1243-0052-P1
Advanced Wick, 2703, 25 ft, .075” wide, fine braid, green bobbin 1243-0015-P1 No-Clean Wick, 2717, 5 ft, .098” wide, blue bobbin 1243-0053-P1
Advanced Wick, 2703, 5 ft, .075” wide, fine braid, green bobbin 1243-0016-P1 No-Clean Wick, 2720, 10 ft, .035” wide, anti static white bobbin 1243-0054-P1
Advanced Wick, 2704, 10 ft, .098” wide, fine braid, blue bobbin 1243-0017-P1 No-Clean Wick, 2720, 25 ft, .035” wide, anti static white bobbin 1243-0055-P1
Advanced Wick, 2704, 25 ft, .098” wide, fine braid, blue bobbin 1243-0018-P1 No-Clean Wick, 2720, 5 ft, .035” wide, anti static white bobbin 1243-0056-P1
Advanced Wick, 2704, 5 ft, .098” wide, fine braid, blue bobbin 1243-0019-P1 No-Clean Wick, 2721, 10 ft, .055” wide, anti static yellow bobbin 1243-0057-P1
Advanced Wick, 2705, 5 ft, .130” wide, fine braid, brown bobbin 1243-0020-P1 No-Clean Wick, 2721, 25 ft, .055” wide, anti static yellow bobbin 1243-0058-P1
Advanced Wick, 2705, 10 ft, .130” wide, fine braid, brown bobbin 1243-0021-P1 No-Clean Wick, 2721, 5 ft, .055” wide, anti static yellow bobbin 1243-0059-P1
Advanced Wick, 2705, 25 ft, .130” wide, fine braid, brown bobbin 1243-0022-P1 No-Clean Wick, 2722, 10 ft, .075” wide, anti static green bobbin 1243-0060-P1
Advanced Wick, 2706, 10 ft, .193” wide, fine braid, red bobbin 1243-0023-P1 No-Clean Wick, 2722, 25 ft, .075” wide, anti static green bobbin 1243-0061-P1
Advanced Wick, 2706, 25 ft, .193” wide, fine braid, red bobbin 1243-0024-P1 No-Clean Wick, 2722, 5 ft, .075” wide, fine anti static green bobbin 1243-0062-P1
Advanced Wick, 2708, 10 ft, .035” wide, white anti static bobbin 1243-0025-P1 No-Clean Wick, 2723, 10 ft, .098” wide, anti static blue bobbin 1243-0063-P1
Advanced Wick, 2708, 25 ft, .035” wide, white anti static bobbin 1243-0026-P1 No-Clean Wick, 2723, 25 ft, .098” wide, anti static blue bobbin 1243-0064-P1
Advanced Wick, 2708, 5 ft, .035” wide, white anti static bobbin 1243-0027-P1 No-Clean Wick, 2723, 5 ft, .098” wide, anti static blue bobbin 1243-0065-P1
Advanced Wick, 2709, 10 ft, .055” wide, yellow anti static bobbin 1243-0028-P1 No-Clean Wick, 2724, 10 ft, .130” wide, anti static brown bobbin 1243-0066-P1
Advanced Wick, 2709, 25 ft, .055” wide, yellow anti static bobbin 1243-0029-P1 No-Clean Wick, 2724, 25 ft, .130” wide, anti static brown bobbin 1243-0067-P1
Advanced Wick, 2709, 5 ft, .055” wide, yellow anti static bobbin 1243-0030-P1 No-Clean Wick, 2724, 5 ft, .130” wide, anti static brown bobbin 1243-0068-P1
Advanced Wick, 2710, 10 ft, .075” wide, green anti static bobbin 1243-0031-P1 Bobbin Styles
Advanced Wick, 2710, 5 ft, .075” wide, green anti static bobbin 1243-0032-P1
Advanced Wick, 2710, 25 ft, .075” wide, green anti static bobbin 1243-0033-P1
Advanced Wick, 2711, 10 ft, .098” wide, blue anti static bobbin 1243-0034-P1
Advanced Wick, 2711, 25 ft, .098” wide, blue anti static bobbin 1243-0035-P1
Advanced Wick, 2711, 5 ft, .098” wide, blue anti static bobbin 1243-0036-P1
Advanced Wick, 2712, 10 ft, .130” wide, brown anti static bobbin 1243-0037-P1
Advanced Wick, 2712, 25 ft, .130” wide, brown anti static bobbin 1243-0038-P1
Advanced Wick, 2712, 5 ft, .130” wide, brown anti static bobbin 1243-0039-P1
Advanced Wick, 2713, 25 ft, .193” wide, red anti static bobbin 1243-0040-P1
Advanced Wick, 2713, 5 ft, .193” wide, red bobbin 1243-0041-P1

36 www.paceworldwide.com www.paceworldwide.com 37
 OUR MOST POPULAR CONFIGURATIONS AND BENCHTOP SYSTEMS
APPLICATIONS SUPPORT & TRAINING
With Sodr-Tek you can create the exact system configuration to meet your needs! Common sample configurations are shown below.
PACE offers the most advanced operator
training courses available. There are five ST 25 with PS-90 Iron & ST 125 with SX-80 ST 45 with TJ-80 Iron & ST 125 with SX-80
standard, four day courses and six 2-day
courses to choose from, or we can customize
a course to meet your specific needs. The
Standard 4 day courses are:

PCT 200
High Reliability Through-Hole Soldering and
Rework (Standard Through-Hole)

PCT 230
Mixed Technology Rework & Repair
(Standard Through –Hole and SMT)

PCT 300
Multi-Layer and Flexible Circuit Repair

PCT 400
Surface Mount Assembly Rework & Repair
(Standard SMT)
ST 45 with PS-90 Iron & ST 145 with SX-80 ST 325 with ST 500 & ST 550 & ST 450
PCT 500
Advanced Surface Mount Rework & Repair
(BGA and Fine Pitch)

APPLICATION SUPPORT
PACE offers valuable application support services to Sodr-Tek customers. If you ever find yourself in a situation where you need assistance with
how to use a piece of equipment, how to install or remove a component, or how to incorporate lead free solders into your processes, simply call
PACE’s applications support department and we’ll provide you with the tools and information you need at no charge! For component installations
and removals, we will provide you with a detailed set of work instructions with images to take you through the process step by step.

Need more help?

Call our applications support department and we will walk you through the process.
When you purchase Sodr-Tek you get much more than the best equipment, you gain
a partner to support your technical needs.
ST 25 with TJ-80 & HW 50 with TD-100 ST 350 & ST 600 & ST 450
& ST 145 with SX-80

38 www.paceworldwide.com www.paceworldwide.com 39