Scribd
Upload
7 views1 page

Storm - PDI Checklist

The document outlines a checklist for inspecting the Storm T1250 vehicle, covering various categories including electrical, mechanical, and general checks. Each task includes specific details to verify, such as battery inspection, fan functionality, and fluid checks, along with a status and remarks section. The checklist is designed to ensure the vehicle's safety and operational readiness before use.

Uploaded by

vikeshachand.singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
7 views1 page

Storm - PDI Checklist

The document outlines a checklist for inspecting the Storm T1250 vehicle, covering various categories including electrical, mechanical, and general checks. Each task includes specific details to verify, such as battery inspection, fan functionality, and fluid checks, along with a status and remarks section. The checklist is designed to ensure the vehicle's safety and operational readiness before use.

Uploaded by

vikeshachand.singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PDI Checkpoints - Storm T1250

Chasis No.- Date:-


Battery No. Model-
KM-
Category Task Details Status Remark, if any
Verify with PCAN if data is updated (Firmware
CAN Data Update
Versions).

Primary Battery Inspection Inspect the Primary battery body for any damage.

Ensure DC-DC, OBC, and MCU fans are


Fan Functionality Check
functioning.
Electrical

Review BMS data for battery temperature,


BMS Data Review
Voltages.

Light and Indicator Check Check all lights (cabin, headlamps) and indicators.

Charging (AC & DC) Checked by charging both AC & DC.


LV Appliances and Fuse Check Inspect all LV appliances and their fuses.

Ensure all LV negative and ground connections


Grounding Check
are properly connected to the vehicle body.

Xavier/Cluster Indication Check Inspect all Xavier/cluster indications.


EPS Callibrated or Not
Wiper Motor Inspection Inspect wiper motors.

Tighten Nuts and Bolts Ensure all nuts and bolts are properly tightened.

Coolant Level Check Check the coolant level.

BCS Pipe and Tube Inspection Inspect BCS pipes and tubes for any leakage.

Inspect the condition of the shock absorbers and


Shock Absorber Inspection
there torquing (replace if necessary).

Ensure the proper functioning of the braking


Braking System Check
system. (Hydraulic + Hand Brake)
Mechanical

Check the steering system, drag link (position)


Steering System Inspection and tie rod ends for looseness, damage, or wear
(replace if required).
EPS Callibrated or Not
Wheel Alignment Check Inspect wheel alignment.
Battery Mounting Inspection Check battery mounting.
Inspect the suspension system (leaf springs, U-
Suspension System Inspection
bolt, ARB rod, Shockers,etc.).
Check the movement of doors also fitness of
Check door opening LH&RH
door belt.

Check door inner locking knob RH& check for play/free movement/ensure working

Hose Pipe and Bundy Tube InspectioInspect hose pipes and Bundy tubes.
Check back sliding Ensure beading fitment / Glass movement.
Top wash only; avoid high-pressure washing
around HV couplers, C3 box, charging port box,
Vehicle Wash
and underbody. Clean condenser fins with
compressed air.

Check and refill gearbox oil, brake oil, windshield


Fluid Check and Refill (IR)
fluid, BCS coolant.
General

Check for oil leakage, mud, or damages. Clean if


Inspect for Leaks and Damage
necessary.

Check the floor mat, clean it if needed, and check


Check Floor mat
for cuts.
Check utility Box Check for fitness / Check if lock working
Check Jack, Tool kit, Medical Kit & Charging Gun
Kit Section
available or not.
Check for paint work/Any damage both internally
Paint/Dent/Scratch/Damage
and Externally
Vehicle Checked BY :-
Sign:-

You might also like