Scribd
Upload
15 views1 page

Novo Pro Alkyd Matt

Novo Pro Alkyd Matt is a matt synthetic enamel paint based on Alkyd resin, designed for application on various surfaces including wood, metal, and plaster. It offers high coverage, durability, and is easy to apply with recommended surface preparation and priming. Safety precautions include wearing protective gear and ensuring proper ventilation during application.

Uploaded by

wael barbary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views1 page

Novo Pro Alkyd Matt

Novo Pro Alkyd Matt is a matt synthetic enamel paint based on Alkyd resin, designed for application on various surfaces including wood, metal, and plaster. It offers high coverage, durability, and is easy to apply with recommended surface preparation and priming. Safety precautions include wearing protective gear and ensuring proper ventilation during application.

Uploaded by

wael barbary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Novo Pro Alkyd – Matt

Last update: - 24 / 06 / 2021 (2)

Matt Synthetic enamel paint.


DEFINITION SURFACE PREPARATION
Novo Pro Alkyd Matt is matt synthetic enamel • The surface of the substrate should be
paint, based on Alkyd resin, and other selected cleaned from oil, grease, dirt, and loose
pigments and fillers. particles.
ADVANTAGES • The surface should be smoothed well by
o Easy to apply. suitable putty and blasted to be smooth.
o High coverage because of the use of finely • The substrate should be primed or coated
grounded and high-quality pigments. with suitable under coat then left to dry and
o After drying, it produces matt elastic smoothed down with sand paper.
homogenous film that is well adhered to • Steel surface should be plastered and primed
by Novo Prime R , Novo Prime ZP1 ,
the substrate and resisted abrasion and
Novo prime ZR1
scratching.
• Mix well the contents that will be used.
USES
• One or two coats of Novo Pro Alkyd Matt
▪ Can be applied on synthetic primer or
are recommended to apply.
undercoat or on both...also.
• Can be applied by brush, roller or spraying
▪ On wooden, metallic and plastered surface.
gun.
▪ Can be used as high-quality undercoat
• Can be thinned by Novo sol X2 if needed.
before application top coat of glossy alkyd
• Clean tools by Novo sol T9 or Novo sol X2
paint like Por Alkyd Matt COVERAGE
PHYSICAL PROPERTIES @ 25 Cº 4- 6 m2 / kg / 75-micron coat.
DISCRIPTION VALUE (Depending on the surface condition and type)
Color white and colored STORAGE CONDITIONS
Density (1.45 ±0.05)gm. / cm • Best stored at room temperature in dry
3 conditions.
• Avoid humidity, cold freezing
Viscosity 20 ± 5 poise
conditions and off concrete floors.
Solid content (by WT.) (72 ±2) % • Do not store in direct sunlight. (10 -30)
Solid content (by Vol.) (52 ±2) % Cº
PRECAUTIONS & SAFETY
Surface dry 1 hr.
o Wear protective clothes, gloves, glasses
Hard dry 24 hr. and face protection.
Full cure 7 days o Application should be carried out in well
Thinner Sol X 2 ventilate place
o For skin contact, remove it with suitable
Shelf life 12 months in suitable cream followed by soap and water
storage conditions cleaning.
o Don’t eat or smoke during use.

ISSUE DATE/REV: - 1/5/2021 ISSUE REV NO: - 2/1 FP-14-07/EN

You might also like