User Manual
Quick Start Guide
A9 MiNi WiFi camera
Please read user manual carefully before use
Welcome to A9 MiNi WiFi Camera
Product Function Display:
( Micro SD card is not included in the box )
Two installation methods
1) You can place your camera to magnet on any
surface with iron material.
2) You can mount it on the desktop or wall with
bracket
Quick Start Guide
Before start up
Connect the standard USB end of the cable to any
USB port worldwide.
1.Insert into a USB port on a computer,laptop,some
wall outlets,as well as cars.
Camera show red led light to indicate the charging
status.When red led light is light off, the camera is
full and finished charging.(1-1)
2.Format your micro SD card if it is needed.
The format of micro SD card need be FAT32.
3.Insert micro SD card.
Micro SD card slot is around the camera USB port.
Camera will not
work without micro SD card.Please make sure micro
SD card is
installed before starting to use.(1-2)
4. Reset
Please note that the occasional RESET may be
required in case camera has malfunction.
To RESET, hold down the Mode button for 5
seconds and then release.
(1-1)
(1-2)
Before setting up, you need to know:
1. Make sure you are using a 2.4GHz wireless
network and not 5GHz.
2. Make sure your phone has downloaded the
"JXLCAM" APP.
3. Make sure your camera and wifi router are not far
away from you.
4. Make sure that the mobile phone is close to the
camera during configuration.
5. If you encounter any problems during use, please
contact us in time, we are honored to be able to help
you solve the problem.
APP download: you can scan this QR code to
download, or search for "JXLCAM" through "google
play" or "APP Store"
Camera WiFi mode setting
※ Note: Please bring your own non-5G WIFI
1.Connect to the non-5G WiFi at home
2.Open the APP "JXLCAM" and Click "+"
.
3.Select AP add camera
4.Select and connect to the site WiFi, enter the
password, the next step
5.Click on the "..." on the right
The Android phone will jump directly to the
"WLAN" interface, directly click on the product
hotspot WIFI "BCCQ……", and then return to the
APP"JXLCAM"
iPhone needs to be divided into two steps：
①Click "Settings" in the upper left corner to find
the WIFI setting interface
②In "WLAN", click the product hotspot WIFI
"BCCQ……", and then return to the
APP"JXLCAM"
6.After returning to the APP, click "APP Camera"
7.Waiting for the camera to be networked
If you stay on this page for more than five
minutes, please check whether the router and
WiFi password are configured correctly (the
device does not support 5G WiFi).After
confirming that it is correct, you can press and
hold the MODE button for about 5 seconds until
the device indicator flashes quickly, restore the
factory settings, and then Re-distribute the
network.
8.Distribution network is successful
aa
9.Customize name
10.You can view the camera preview page on the
homepage
Hotspot mode settings
Even if there is no Wi-Fi Internet environment, it can
be used at close range through the Wi-Fi connection
of the smart phone and the camera itself. (Up to 32
feet without shelter, depending on the environment)
1.Connect to the non-5G WiFi at home
2.Open APP "JXLCAM", click "AP" in the upper
left corner
This equipment has been tested and found to comply with the limits for a ClassB digital
device,pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates,uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: -Reorient or relocate
the receiving antenna. -Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued
compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user's authority to operate this equipment.
(Example- use only shielded interface cables when connecting to computer or peripheral
devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause
undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled
environment. This equipment should beinstalled and operated with minimum distance
20cm between the radiator and your body
