BARCODE SCANNER

PA-BR-001

Users Menu Book

BROTHER INDUSTRIES, LTD.

Ver.0

I
Editing and publishing notices
● Brother Industries, Ltd. reserves the right to modify, without notice, materials and
specifications published in this document.
In addition, we assume no responsibility for damages (including consequential damages)
resulting from the use of published materials, including typographical errors or any other
error included in the publications.
● The contents of this document are subject to change without notice.
● The contents of this document may not be duplicated or reproduced, partially or in full,
without permission.
● Every effort has been made to ensure that the content of this document is accurate.
However, any questionable or erroneous information that is found should be reported.
● We assume no responsibility for claims from third parties or for profit losses or damages
resulting from the use of labels created using this barcode scanner or from lost or
corrupted data due to malfunctions or repairs to this barcode scanner.

II
 Introduction

Thank you for purchasing BARCODE SCANNER PA-BR-001.

This menu book explains BARCODE SCANNER’s function setting method by the menu barcode.

This book consists of 3 sections as below.

Part 1 Menu barcode setting method and initialization.

Part 2 Set readable code.
Part 3 BARCODE SCANNER operation setting.

Part 1 describes various setting procedures and notes from the normal reading operation status, and
menu barcode to return to default setting (factory default setting).

In Part 2 and 3, the readable code setting and BARCODE SCANNER operation setting can be change
according to customer’s usage.

III
 Contents

Part 1 Menu barcode setting method and Initialization............................................................................................... 1

1. Shifting to menu setting mode and setting completion ............................................................................................... 1
2. Reading menu barcode .............................................................................................................................................................. 1
3. Default Option ............................................................................................................................................................................... 3

Part 2 Setting of readable codes ........................................................................................................................................ 4

1. Enabling a single read code ..................................................................................................................................................... 4
2. Enabling of readable codes ...................................................................................................................................................... 6
3. Setting code specific options ................................................................................................................................................. 8
3.1. EAN -13, EAN-8, UPC-A, UPC-E and Code 39 Opticon .......................................................................... 8
3.2. Option for 2 of 5 ............................................................................................................................................................. 10
3.3. Opticon for NW-7(Codabar), GS1 DataBar Omindirectional ................................................................. 11
3.4. Option for Coda 93, Code128, GS1-128 and other code ........................................................................ 12
4. String Opticon ............................................................................................................................................................................ 14
4.1. Setting prefix .................................................................................................................................................................... 14
4.2. Setting suffix..................................................................................................................................................................... 16
5. Direct input .................................................................................................................................................................................. 18
5.1. Direct input numeric ..................................................................................................................................................... 18
5.2. Direct input character .................................................................................................................................................. 19
5.3. Direct input lower case character ......................................................................................................................... 21
5.4. Data add (newline code)............................................................................................................................................ 23
5.5. Other direct character input ..................................................................................................................................... 24
6. Setting of number of characters ........................................................................................................................................ 25

Part 3 BARCODE SCANNER operation setting...........................................................................................................26

1. Reading options ......................................................................................................................................................................... 26
1.1. Read mode options ...................................................................................................................................................... 26
1.2. Read time options ......................................................................................................................................................... 27
1.3. Auto trigger options ...................................................................................................................................................... 28
1.4. Redundancy ..................................................................................................................................................................... 29
1.5. Positive and negative barcodes ............................................................................................................................. 30
1.6. Illumination LED ............................................................................................................................................................. 31
2. Indicator options........................................................................................................................................................................ 32
2.1. Buzzer settings ............................................................................................................................................................... 32
2.2. Good read LED ............................................................................................................................................................... 33
3. Other .............................................................................................................................................................................................. 34

IV
3.1. Keyboard language ...................................................................................................................................................... 34
3.2. Intercharacter delay...................................................................................................................................................... 35

V
Part 1 Menu barcode setting method and Initialization

1. Shifting to menu setting mode and setting completion

To change setting using the menu barcode with PA-BR-001, you need to shift from the normal
reading operation status to the menu setting status. Read SET menu barcode to shift to the menu
setting status. Read END to record / finish the menu setting and return to the normal reading
operation status.

When reading of SET / END menu barcode and reading each menu barcode during menu setting,
different than normal scan operation buzzer will sound and read (blue) LED light.

Also, reading SET and until the completion of menu setting, buzzer to state the menu setting status
will sound and become the auto scanning mode which red light (illumination LED) continue to light.
During this time, trigger key operation is not required.

Please do not turn off the power (disconnect the USB connection) during setting. In such case,
setting is not stored, please retry setting from beginning.
To turn the power off after menu setting, after sounding of reading END buzzer, wait for a moment
(about 2 seconds) and turn off.

2. Reading menu barcode

The User’s menu book contains various menu barcodes. To prevent from reading undesired barcode,
menu barcode table’s setting barcode are listed with a shift to the left and right.

Referring below drawing, please adjust the distance between BARCODE SCANNER and menu
barcode by using illumination LED width as a guide.

1
If unnecessary menu barcode is read, for example reading menu barcode to disable setting A;
Please continue setting, and read the menu barcode to enable setting A. The last read setting will be
reflected.
In case erroneously read menu is unknown, not read END but turn off the power and restart setting.
Or, after reading END, process default setting which is listed on 3. Default option. Then re-start
setting from beginning.

In addition, paying attention to the following will lead to reduction of misreading.

・Covering unnecessary setting menu barcode by hands.

・Not move BARCODE SCANNERs scan window direction too much, but move entire BARCODE
SCANNER.
・Don’t apart BARCODE SCANNER and menu barcode distance too much. When taking the
distance, reading light largely move even with small move of scanner.

2
3. Default Option
This default option allows you to undo all previous configured options and bring the scanner's
configuration back to the factory default settings. Each settings factory default settings are printed in
bold.

Code Menu barcode

SET ZZ
_ZZ_
Default setting BAP
_BAP_
END ZZ
_ZZ_

3
 Part 2 Setting of readable codes

PA-BR-001 can read various read code. Selecting readable code to match to purpose of use, and
optimizing reading options enables comfortable usage. This section provide following setting.

1. Select readable code. By performing enable readable codes, selected readable code
becomes target.
2. Set option for the enabled readable code.
3. Set various options, for example CD calculated / not calculated.

1. Enabling a single read code

With this option you can set the scanner to read a selected bar code type only. If you want to set
several barcode only, by performing single read code option followed by the next chapter 2. Enabling
of readable codes, adding of enable types is possible.
Code Menu barcode

SET ZZ
_ZZ_
All codes
excl. add-on
A0
_A0_
UPC only J1
_J1_
UPC add-on
+2 only
J2
_J2_
UPC add-on
+5 only
J3
_J3_
EAN only J4
_J4_
EAN add-on
+2 only
J5
_J5_
EAN add-on
+5 only
J6
_J6_
Code 39 only A2
_A2_
Tri-Optic only JD
_JD_
NW-7(Codabar) only A3
_A3_
END ZZ
_ZZ_
4
 Code Menu barcode

SET ZZ
_ZZ_
Industrial
2 of 5 only
J7
_J7_
Interleaved 2 of 5 only J8
_J8_
Code 93 only A5
_A5_
Code 128 only A6
_A6_
GS1-128 only
(Code 128 need to be enable)
JF
_JF_
S-Code only RA
_RA_
MSI/Plessey only A7
_A7_
UK/Plessey only A1
_A1_
TELEPEN only A9
_A9_
Chinese Post Matrix 2 of 5
only
JE
_JE_
IATA only A4
_A4_
GS1 DataBar
Omnidirectional only
J9
_J9_
GS1 DataBar
Limited only
JJ
_JJ_
GS1 DataBar
Expanded only
JK
_JK_
Code 11only BLB
_BLB_
Korean Postal
Authority Code only
JL
_JL_
END ZZ
_ZZ_
5
2. Enabling of readable codes
Differ from previous Chapter 1. Enabling a single read code, with keeping previous enabled readable
barcode type setting, to add anew is possible.

Code Menu barcode

SET ZZ
_ZZ_
All codes excl. add-on A0
_A0_
Enable UPC R1
_R1_
Enable UPC + 2 R2
_R2_
Enable UPC + 5 R3
_R3_
Enable EAN R4
_R4_
Enable EAN + 2 R5
_R5_
Enable EAN + 5 R6
_R6_
Enable Code 39 B2
_B2_
Enable Tri-Optic JZ
_JZ_
Enable NW-7(Codabar) B3
_B3_
Enable Industrial 2 of 5 R7
_R7_
Enable Interleaved 2 of 5 R8
_R8_
Enable Code 93 B5
_B5_
Enable Code 128 B6
_B6_
Enable GS1-128
(Code 128 need to be enable)
OG
_OG_
END ZZ
_ZZ_
6
 Code Menu barcode

SET ZZ
_ZZ_
Enable S-Code R9
_R9_
Enable MSI/Plessey B7
_B7_
Enable UK/Plessey B1
_B1_
Enable TELEPEN B9
_B9_
_JS_
Enable Chinese Post Matrix
JS
2 of 5

Enable IATA B4
_B4_
Enable GS1 DataBar
Omnidirectional
JX
_JX_
Enable GS1 DataBar
Limited
JY
_JY_
Enable GS1 DataBar
Expanded
DR
_DR_
Enable Code 11 BLC
_BLC_
Enable Korean Postal
Authority Code
WH
_WH_
END ZZ
_ZZ_

7
3. Setting code specific options
3.1. EAN -13, EAN-8, UPC-A, UPC-E and Code 39 Opticon
Code Menu barcode

SET ZZ
_ZZ_
_E2_
UPC-A
Leading zero, E2
Transmit CD

_E3_
UPC-A
No leading zero, E3
Transmit CD

_E4_
UPC-A
Leading zero, E4
Not transmit CD

_E5_
UPC-A
No leading zero, E5
Not transmit CD

_E6_
UPC-E
Leading zero, E6
Transmit CD

_E7_
UPC-E
No leading zero, E7
Transmit CD

_E8_
UPC-E
Leading zero, E8
Not transmit CD

_E9_
UPC-E
No leading zero, E9
Not transmit CD

END ZZ
_ZZ_

8
 Code Menu barcode

SET ZZ
_ZZ_
EAN-13:
Not transmit CD
6J
_6J_
EAN-13:
Transmit CD
6K
_6K_
EAN-8:
Not transmit CD
6H
_6H_
EAN-8:
Transmit CD
6I
_6I_
Code 39:
Check CD
C0
_C0_
Code 39:
Not check CD
C1
_C1_
Code 39:
Transmit CD
D9
_D9_
Code 39:
Not transmit CD
D8
_D8_
Code 39:
Transmit ST/SP
D0
_D0_
Code 39:
Not transmit ST/SP
D1
_D1_
END ZZ
_ZZ_

9
3.2. Option for 2 of 5

2 of 5 include following code.

Industrial 2 of5
Interleaved 2 of 5
S-Code
Matrix 2 of 5
Chinese Post Matrix 2 of 5

Code Menu barcode

SET ZZ
_ZZ_
2 of 5:
Not check CD
G0
_G0_
2 of 5:
Check CD
G1
_G1_
2 of 5:
Transmit CD
E0
_E0_
2 of 5:
Not transmit CD
E1
_E1_
END ZZ
_ZZ_

10
3.3. Opticon for NW-7(Codabar), GS1 DataBar Omindirectional
Code Menu barcode

SET ZZ
_ZZ_
NW-7(Codabar):
Not check CD
H7
_H7_
NW-7(Codabar):
Check CD
H6
_H6_
NW-7(Codabar):
Transmit CD
H8
_H8_
NW-7(Codabar):
Not transmit CD
H9
_H9_
NW-7(Codabar):
Not transmit ST/SP
F0
_F0_
NW-7(Codabar):
ST/SP: ABCD/TN*E
F1
_F1_
NW-7(Codabar):
ST/SP: abcd/tn*e
F2
_F2_
NW-7(Codabar):
ST/SP: ABCD/ABCD
F3
_F3_
NW-7(Codabar):
ST/SP: abcd/abcd
F4
_F4_
_DM_
GS1 DataBar
Omnidirectional: DM
Not transmit CD

_DL_
GS1 DataBar
Omnidirectional: DL
Transmit CD

GS1 DataBar
Omnidirectional:
Not transmit Application
Identifier
DT
_DT_
GS1 DataBar
Omnidirectional:
Transmit Application
Identifier
DS
_DS_
END ZZ
_ZZ_

11
3.4. Option for Coda 93, Code128, GS1-128 and other code
Code Menu barcode

SET ZZ
_ZZ_
Code 93:
Not check CD
9Q
_9Q_
Code 93:
Check CD
AC
_AC_
Code128/GS1-128:
Not check CD
MF
_MF_
Code128/GS1-128:
Check CD
ME
_ME_
MSI/Plessey:
Not check CD
4A
_4A_
MSI/Plessey:
Check CD1
4B
_4B_
MSI/Plessey:
Transmit CD
4E
_4E_
MSI/Plessey:
Not transmit CD
4G
_4G_
UK/Plessey:
Transmit CD
4N
_4N_
UK/Plessey:
Not transmit CD
4O
_4O_
IATA:
Transmit CD
4L
_4L_
IATA:
Not transmit CD
4M
_4M_
END ZZ
_ZZ_

12
 Code Menu barcode

SET ZZ
_ZZ_
Code 11:
Not check CD
BLF
_BLF_
Code 11:
Check CD1
BLG
_BLG_
Code 11:
Check CD2
BLH
_BLH_
Code 11:
Check CD1or CD2
BLI
_BLI_
Code 11:
Transmit CD
BLK
_BLK_
Code 11:
Not transmit CD
BLJ
_BLJ_
END ZZ
_ZZ_

13
4. String Opticon
Set prefix and suffix string (maximum 4 characters).
To configure, scan desire barcode type’s menu barcode, and scan desire character from 5. Direct
input string menu barcode, then scan END to complete.
Numeric, character, lower case character can be set. Mix of character type is also possible.

If you want to clear only single / specific barcode type prefix or suffix, after scanning barcode type
menu barcode, not perform direct input but complete with END.

4.1. Setting prefix

Code Menu barcode

SET ZZ
_ZZ_
All codes RY
_RY_
UPC-A N1
_N1_
UPC-A + add on M0
_M0_
UPC-E N2
_N2_
UPC-E + add on M1
_M1_
EAN-13 N3
_N3_
EAN-13 + add on M2
_M2_
EAN-8 N4
_N4_
EAN-8 + add on M3
_M3_
Code 39 M4
_M4_
NW-7(Codabar) M5
_M5_
Industrial 2 of 5 M6
_M6_
Interleaved 2 of 5 M7
_M7_
Code 93 M8
_M8_
14
Code 128 M9
_M9_
S-Code MB
_MB_
MSI/Plessey N0
_N0_
Matrix 2 of 5 GL
_GL_
IATA I8
_I8_
_OE_
GS1 DataBar
OE
Omnidirectional

Code 11 BLD
_BLD_
Korean Postal
Authority Code
*$
_*$_
Clear all prefixes MG
_MG_
_MZ_
Preamble
MZ
(Common prefix)

END ZZ
_ZZ_

15
4.2. Setting suffix
Code Menu barcode

SET ZZ
_ZZ_
All codes RZ
_RZ_
UPC-A N6
_N6_
UPC-A + add on O0
_O0_
UPC-E N7
_N7_
UPC-E + add on O1
_O1_
EAN-13 N8
_N8_
EAN-13 + add on O2
_O2_
EAN-8 N9
_N9_
EAN-8 + add on O3
_O3_
Code 39 O4
_O4_
NW-7(Codabar) O5
_O5_
Industrial 2 of 5 O6
_O6_
Interleaved 2 of 5 O7
_O7_
Code 93 O8
_O8_
Code 128 O9
_O9_
S-Code OB
_OB_
MSI/Plessey N5
_N5_
16
Matrix 2 of 5 GM
_GM_
IATA I9
_I9_
_PQ_
GS1 DataBar
PQ
Omnidirectional

Code 11 BLE
_BLE_
Korean Postal
Authority Code
*%
_*%_
Clear all suffixes PR
_PR_
Postamble
(Common suffixes)
PS
_PS_
END ZZ
_ZZ_

17
5. Direct input
Direct input is use when settings prefix / suffix string (maximum 4 characters).

5.1. Direct input numeric

Code Menu barcode

0 Q0
_Q0_
1 Q1
_Q1_
2 Q2
_q2_
3 Q3
_q3_
4 Q4
_q4_
5 Q5
_q5_
6 Q6
_q6_
7 Q7
_q7_
8 Q8
_q8_
9 Q9
_q9_
END ZZ
_ZZ_

18
5.2. Direct input character
Code Menu barcode

A 0A
_0A_
B 0B
_0B_
C 0C
_0C_
D 0D
_0D_
F 0E
_0E_
F 0F
_0F_
G 0G
_0G_
H 0H
_0H_
I 0I
_0I_
J 0J
_0J_
K 0K
_0K_
L 0L
_0L_
M 0M
_0M_
N 0N
_0N_
O 0O
_0O_
P 0P
_0P_
Q 0Q
_0Q_
R 0R
_0R_
19
S 0S
_0S_
T 0T
_0T_
U 0U
_0U_
V 0V
_0V_
W 0W
_0W_
X 0X
_0X_
Y 0Y
_0Y_
Z 0Z
_0Z_
END ZZ
_ZZ_

20
5.3. Direct input lower case character
Code Menu barcode

a $A
_$a_
b $B
_$B_
c $C
_$C_
d $D
_$D_
e $E
_$E_
f $F
_$F_
g $G
_$G_
h $H
_$H_
i $I
_$I_
j $J
_$J_
k $K
_$K_
l $L
_$L_
m $M
_$M_
n $N
_$N_
o $O
_$O_
p $P
_$P_
q $Q
_$Q_
r $R
_$R_
21
 s $S
_$S_
t $T
_$T_
u $U
_$U_
v $V
_$V_
w $W
_$W_
x $X
_$X_
y $Y
_$Y_
z $Z
_$Z_
END ZZ
_ZZ_

22
5.4. Data add (newline code)

Following 4 ways are possible to set newline code to suffix.

② is to set some of old type keyboard correspond to “execution key (right Ctrl key)”.
In order to send 2 operations, press key and release, please scan “7X” twice for “press” and “release”
as shown in following table.

Code Menu barcode

SET ZZ
_ZZ_
①
Add
1) Set suffix RZ
_RZ_
new
line 2) Add “Enter” 7I
_7I_
1) Set suffix RZ
_RZ_
_7X_
②
Add 2) Press “Ctrl” 7X
action

3) Release “Ctrl” 7X
_7X_
③
1) Set suffix RZ
_RZ_
Add
TAB
2) Add TAB ７H
_7H_
④
No add
1) Delete suffix PR
_PR_
END ZZ
_ZZ_

23
5.5. Other direct character input
In case you want to copy barcode, adding print start command “^FF” to suffix enables to start label
printer to print by just scanning barcode to be copied.
No need to scan print start command barcode again.

Following is the collective setting to add print start command to all barcode type and to clear (clear all
suffix).
Without reading menu setting method: SET~END, setting complete with only reading following menu
barcode.

Collective setting menu to add print start command to all barcode type

Menu barcode

Add print start command

“^FF” to all barcode type
suffixes.

Notes when suffix is set to “^FF”

・Template number cannot be change. Please only use barcode copy of default setting’s template
number.
・Printing start at same time as reading 1 barcode. When printing template that read multiple of
barcode, please read collective setting menu barcode to clear print command (clear all suffix) or
return to default setting status.

Collective setting menu to clear print start command (clear all suffix)

Menu barcode

Clear all suffix

24
6. Setting of number of characters
Reading of a known length barcode, by setting fixed number of characters, verifies if read label are
correct lengths or not and will not output non-specified length label. This can be done for up to two
lengths.
This is effective for reading Interleaved 2 of 5 or others which do not provides sufficient security against
partial scan.

Setting procedure
Read length ON menu barcode follow by reading of actual barcode label of desired barcode type/lengths
to be set. And setting completes with reading END menu barcode.
Fixing length can be done for up to two lengths; different barcode type/length can also be set.

Code Menu barcode

SET ZZ
_ZZ_
Fixed length OFF all codes H0
_H0_
Fixed length ON all codes H1
_H1_
END ZZ
_ZZ_

25
 Part 3 BARCODE SCANNER operation setting

1. Reading options
1.1. Read mode options

Single read:
Reading start by pressing trigger key, and when barcode is read, illumination LED stop and
become wait mode. Even fail to read barcode, will stop after 2 seconds (default setting) and
becomes wait mode.

Multiple read:
Reading start by pressing trigger key, and read barcode and continue to read further. Continuously
read barcode one after another, but same label cannot be read continuously. When 2 seconds
(default setting) of barcode unreadable time continues, reading operation stops, and become wait
mode.

Trigger key:
Selecting “Disable trigger”, maintains operating status without pressing trigger key. However,
please note its affect to the life of optical components which is a light source. If selecting “Enable
trigger”, readable time can be set.

Code Menu barcode

SET ZZ
_ZZ_
Single read S0
_S0_
Multiple read S1
_S1_
Disable trigger S7
_S7_
Enable trigger S8
_S8_
END ZZ
_ZZ_

26
1.2. Read time options

Readable time:
Function to automatically stop reading operations if fails to read barcode within selected time. In
initial setting status, it is set to 2 seconds.
Incidentally, when trigger key is disabled, this function becomes disabling.

Code Menu barcode

SET ZZ
_ZZ_
0 sec Y0
_Y0_
1 sec Y1
_Y1_
2 sec Y2
_Y2_
4 sec Y4
_Y4_
6 sec Y6
_Y6_
Read time * 10 YL
_YL_
END ZZ
_ZZ_

27
1.3. Auto trigger options

These options are used to activate the auto trigger option of the scanner.
Code Menu barcode

SET ZZ
_ZZ_
Disable auto trigger +F
_+F_
Enable auto trigger +I
_+I_
Disable stand detection *5
_*5_
Enable stand detection *4
_*4_
END ZZ
_ZZ_
Stand detection is the function to detect that BARCODE SCANNER is attached to the dedicated
stand.
By combined use of this function and the auto trigger function, enabling auto trigger when
BARCODE SCANNER is attached to the stand is possible.

28
1.4. Redundancy

Data matching:
By automatically read more than 2 times consecutively and matching the result, increases reliability
of the data.

Code Menu barcode

SET ZZ
_ZZ_
Read 1 time,
redundancy = 0
X0
_X0_
Read 2 times,
redundancy = 1
X1
_X1_
Read 3 times,
redundancy = 2
X2
_X2_
Read 4 times,
redundancy = 3
X3
_X3_
END ZZ
_ZZ_

29
1.5. Positive and negative barcodes

Usually bar codes are printed black on white, but sometimes white on black. These labels are called
positive and negative respectively. In case the 'negative bar codes' option has been selected, positive
labels may not be decoded anymore or with difficulty. This also applies to menu labels.

Code Menu barcode

SET ZZ
_ZZ_
Positive barcodes V2
_V2_
Negative barcodes V3
_V3_
Positive and negative bar
codes
V4
_V4_
Positive barcodes V2
_V2_
Positive and negative bar
codes
V4
_V4_
SET / END ZZ
_ZZ_
END ZZ
_ZZ_

30
1.6. Illumination LED
By switching illumination LED On/Off, scanning performance may improve. This illumination is
possible to set.

・ E n a b l e i l l u m i n a t i o n L E D : The scanner reads a bar code with the illumination LED turned
ON. This mode is default.
・ D i s a b l e i l l u m i n a t i o n L E D : The scanner reads a bar code using the LCD backlight as
illumination source and without turning on the illumination LED.
・Alternating illumination LED: The scanner reads a bar code with the illumination LED
turned ON and OFF
・Preventing specular reflection: This mode is for scanning a barcode on a glossy surface. When
the barcode is scanned with the illumination LED ON and the
captured image is too bright to read, then the scanner will turn
the illumination LED OFF and scan the bar code again. The
mode is not suitable for scanning in a dark place.

Code Menu barcode

SET ZZ
_ZZ_
Enable illumination LED D39
_D39_
Disable illumination LED D3A
_D3A_
Alternating illumination LED D3B
_D3B_
Preventing specular
reflection
D3Q
_D3Q_
END ZZ
_ZZ_

31
2. Indicator options

2.1. Buzzer settings

The buzzer can be disabling or duration and loudness can be set.

.

Code Menu barcode

SET ZZ
_ZZ_
Disable buzzer W0
_W0_
Enable buzzer W8
_W8_
Single tone buzzer W1
_W1_
High – low buzzer W2
_W2_
Buzzer duration 50 msec W7
_W7_
Buzzer duration 200 msec W5
_W5_
Buzzer loudness:
Maximum
T0
_T0_
Buzzer loudness:
Middle
T2
_T2_
END ZZ
_ZZ_

32
2.2. Good read LED

The Good Read LED can be disabled or several durations can be set.

Code Menu barcode

SET ZZ
_ZZ_
Disable indicator T4
_T4_
Indicator duration:
200 msec
T5
_T5_
Indicator duration:
400 msec
T6
_T6_
END ZZ
_ZZ_

33
3. Other

3.1. Keyboard language

Keyboard is US language at default setting.

Code Menu barcode

SET ZZ
_ZZ_
Keyboard
US
language
KE
_KE_
Keyboard language
Japanese
PM
_PM_
END ZZ
_ZZ_

34
3.2. Intercharacter delay

Intercharacter delay is use to adjust data transmission speed to host device. If transmit speed is too
fast, some host device may fail to receive all character. Please adjust intercharacter delay until data
are correctly received.
Delay time will be waiting time within scanner.

Because actual transmitting time will be define by host device and USB poring interval, it will be
different from the following time.

Code Menu barcode

SET ZZ
_ZZ_
No delay LA
_LA_
Delay 1
2 msec
LB
_LB_
Delay 2
4 msec
LC
_LC_
Delay 3
6 msec
LD
_LD_
Delay 4
8 msec
LE
_LE_
Delay 5
10 msec
LF
_LF_
Delay 6
12 msec
LG
_LG_
Delay 7
14 msec
LH
_LH_
Delay 8
16 msec
LI
_LI_
Delay 9
18 msec
LJ
_LJ_
Delay 10
20 msec
LK
_LK_
END ZZ
_ZZ_

35
Contact

Brother support website

Please visit our support website at support.brother.com.
You can find following information:
•Software downloads
•Manuals/Documents
•Frequently Asked Questions (Troubleshooting, Useful tips on using printer)
•Consumable information
•Latest OS compatibility information
The contents of this website are subject to change without notice.

36