Catalogue HY11-3500/UK
Characteristics / Ordering Code
The direct operated pressure relief valve series EVSA is a seated type valve for screw-in mounting. It is available in two sizes and three pressure stages. Function When the pressure in port P exceeds the setting pressure the cone opens to port T and thus limits the pressure in port P to the adjusted level. The integrated damping spool prevents pressure fluctuations in the transition region. The pressure is set by the adjusting screw, which is locked by the clamping screw. The setting can optionally be secured by a cylinder lock (key lock). Features  Seated type valve  Screw-in mounting  3 pressure stages  2 adjustment modes - screw with hexagon socket - key lock Technical data
General Design Nominal size Interface Mounting position Ambient temperature MTTFD value Weight Hydraulics Max. operating pressure Pressure stages Nominal flow Fluid Fluid temperature Viscosity permitted recommended Filtration
Direct Operated Pressure Relief Valve Series EVSA
Note The spring must be unloaded when the EVSA is screwed out of the manifold.
Direct operated relief valve, seated type NG06 Screw-in mounting unrestricted [C] -20...+80 [years] 150 [kg] 0.3 [bar] Port P 315, Port T depressurized [bar] 64, 160, 315 [l/min] 40 (NG06), 80 (NG10) Hydraulic oil according to DIN 51524...525 [C] Recommended +30...+50, permitted -20...+70 [cSt] / [mm/s] 20...380 [cSt] / [mm/s] 30...50 ISO 4406 (1999); 18/16/13 (acc. NAS 1638:7)
NG10
0.45
Ordering code
EVSA
Pressure relief valve Pressure stages
A
Adjustment Nominal screw size / thread with hex. type socket
1
FPM Seals Design series
(not required for ordering)
Lock
Code 064 160 315
Pressure stages up to 64 bar up to 160 bar up to 315 bar
Code omit Z Code 06 10
Lock Normal Key lock Nominal size NG06, M28x1.5 NG10, M35x1.5
EVSA UK.INDD RH 06.09.2011
4-19
Parker Hannifin Corporation Hydraulics Group
Catalogue HY11-3500/UK
Characteristic Curves
p/Q performance curves NG06 Pressure stage 64 bar
Direct Operated Pressure Relief Valve Series EVSA
NG10 Pressure stage 64 bar
4
Pressure stage 160 bar Pressure stage 160 bar
Pressure stage 315 bar
Pressure stage 315 bar
All characteristic curves measured with HLP46 at 50C.
EVSA UK.INDD RH 06.09.2011
4-20
Parker Hannifin Corporation Hydraulics Group
Dimensions
EVSA NG06
Catalogue HY11-3500/UK
Direct Operated Pressure Relief Valve Series EVSA
SK-EVSAA0613
EVSA NG10
SK-EVSAA1013
Installation dimensions
Size NG06 NG10
M M28 x 1.5 M35 x 1.5
D1 24.8 31.8
D2 15 18.5
D3 6.8 10
D4 25 32
H9 H9
D5 6.8 10
L1 15 18
L2 19 23
L3 30 35
L4 35 41 - 46
L5 45 52
L6 65 80
EVSA UK.INDD RH 06.09.2011
4-21
Parker Hannifin Corporation Hydraulics Group
Catalogue HY11-3500/UK
Notes
EVSA UK.INDD RH 06.09.2011
4-22
Parker Hannifin Corporation Hydraulics Group