™
250kW Power Supply—AC2250P
Est.
1966
Anderson Electric Controls, Inc.
8639 S. 212 St., Kent, WA 98031 USA 253.395.3003 aecontrols.com
Anderson Electric Controls, Inc.
has been making quality control systems for over four decades.
AEC specializes in high performance power supplies, fully-
integrated dynamometer test stands, and other custom power
conversion solutions.
AC2000P
The AC2000P lineup is a series of high performance power
supplies that have been used by R&D leaders such as General
Motors, Advanced Energy, and Delphi Corporation to develop
cutting edge products for today’s market. Contact us today about
building a custom AC2000P that fits your needs.
Higher Voltage, Higher Power Available
AEC is pleased to announce that the AC2000P line of power
supplies has been upgraded to serve the needs of the renewable
energy industries. While still retaining the performance
necessary for high-fidelity automotive and aerospace
applications, the AC2000P line of power supplies have been
re-designed to offer power levels up to 1.32 MW+ and output
voltages up to 2000VDC+.
Features:
• Highly regulated DC output for exceptional performance even 36 kW Power Supply - AC2036P
under large transient loads.
• Local control is available through a touchscreen interface for
easy maintenance and troubleshooting.
• Remote control is available through ACSYSoft software on
any Windows XP* or Windows 7* computer.
• AC2000P power supplies can also be controlled remotely
through AEC’s driver interface. This allows you to harness
the power of LabVIEW**, .NET Framework, C++, and many
other programming languages to integrate AC2000P power
supplies into your existing software platform for automated
testing.
• Cabinets are built taller rather than wider to minimize floor
space. Perfect for R&D applications. (NOTE: some units
require external isolation transformers and/or cooling
system).
• Many power supplies are available for fast delivery. Contact
AEC for more information.
* Windows XP and Window 7 are trademarks of the Microsoft Corporation.
** LabVIEW is a trademark of National Instruments Corporation.
• Remote voltage sense compensates for IR
output cable drop or automatically adjusts the
output voltage for battery loads.
• A built in shunt (optional) protects the customers
inverter during power outages. This prevents the
unit under test from being damaged during
regeneration.
• In battery simulation mode, AEC power supplies
simulate an internal resistance based on
temperature , current, state of charge, and time.
Technical Specifications:
Steady-State Operation:
Output voltage regulation: < 0.3% of setpoint
Output voltage resolution: 0.0046% of max. output voltage (optional high resolution package)
Transient Operation:
Output voltage during 10 to 90% rated load step: +/- 3% of setpoint
Recovery time during 10 to 90% rated load step: < 10 ms
Transition time from source to sink: < 110 µs
Overload:
Liquid Cooled: 130% of rated power for 3 seconds (< 250kW only)
Air Cooled: 130% of rated power for 20 seconds
Power Quality:
Harmonic Distortion: IEEE-519 compliant
Displacement Power Factor: 0.99% at rated load
Configuration:
AC Input Voltage: 415/480VAC, 3 Phase, 50/60 Hz (Isolation transformer included)
DC Output Voltages available: 0-150 VDC, 0-350 VDC, 0-600 VDC, 0-900 VDC, and 0-2000VDC
DC Output Current dependent on kW rating: 150—2500+ ADC
1200A step load
Current:
-600 to 600A
Maximum Voltage
Error: 0.9%
Steady-State
Voltage Error: 0.15%
Battery Simulation—
AEC Power Supplies come equipped with battery simulation software
that allow the power supply to mimic the output characteristics of many
different battery types. Some features of battery simulation include:
• Over 10 adjustable parameters are provided for adjusting battery
characteristics including:
• Open circuit voltage
• Relaxation time
• Device capacity
• Number of series cells
• Regime of stop time
• Ohmic resistance
• Surface and bulk charge polarization effects
• View a real-time plot of State of Charge against time.
• The simulation may be paused at any time during its run cycle and
resumed later.
About Us
Anderson Electric Controls, Inc., a
leading engineering and
manufacturing firm, specializes in
custom built AC drives and power
supplies which serve a broad range
of applications across several
industries.
AEC serves a diverse group of
companies in the building,
manufacturing and transportation
industries.
We pride ourselves in the quality
and performance of all the products
and systems we deliver. Our
experience, knowledge and
Some of AEC’s clients include: • Delphi Corporation commitment to excellence allows
AEC to be a
• General Motors Corp. • Southwest Research Institute leader in our
technologies.
• Honeywell / Allied Signal • Hyundai Motor Co.
• Advanced Energy • Airbus
• Borg Warner Automotive • Hamilton Sundstrand
PUB: AC2000P 10/11
