Scribd
Upload
211 views9 pages

Simatic 300

The document describes the configuration of a SIMATIC 300 programmable logic controller. It includes the diagnostic address and asset IDs of the CPU and input modules. It also lists the configuration of input and output modules including their addresses, operating modes, and parameter settings.

Uploaded by

Emil Pramono
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
211 views9 pages

Simatic 300

The document describes the configuration of a SIMATIC 300 programmable logic controller. It includes the diagnostic address and asset IDs of the CPU and input modules. It also lists the configuration of input and output modules including their addresses, operating modes, and parameter settings.

Uploaded by

Emil Pramono
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

SIMATIC

SIMATIC 300

Asset ID
CPU 313C-2 DP
Diagnostic address: 32767*
Asset ID: 44431B02FBEA4254AA95974E77978493

AI2x12Bit
Input address: 284...287
Asset ID: 07A937FAB8804E338347FE1F68E6DAAC

AI2x12Bit
Input address: 288...291
Asset ID: C0125EC4807147CDAE514C521808F30D

MICROMASTER 4
Input address: 2046*
Asset ID: 4492D0D99D664D1A8FF387A0B427FAD1

0
Asset ID: EFDB2F8056A44835AEA68849EF6E5336

MICROMASTER 4
Input address: 2045*
Asset ID: A4DD6D698ED148FCB70F5EE1667E2007

0
Asset ID: 39EA9B78CC2047819C8E210F2FEF190F

UR - Rack (0)
Short description: UR
Order no.: 6ES7 390-1???0-0AA0
Designation: UR

Rack (0), Slot 2


Short description: CPU 313C-2 DP
Firmware version: V3.3
Order no.: 6ES7 313-6CG04-0AB0
Designation: CPU 313C-2 DP
Width: 1
MPI address: 2
Highest MPI address: 31
Baud rate: 187.5 Kbps
Comment:
- - -

Plant designation:
Location designation:
Startup
Startup when expected/actual
config. differ: Yes
Delete process-image output area Yes
(PIQ) at hot restart:
Disable hot restart at startup
by means of operator control: Yes
Startup after Power On: Warm Restart
Cold restart: Warm Restart
Monitoring time for
"Finished" message by means of
modules: 65000 ms

µÚ Ò³/¹² Ò³
SIMATIC

Transfer of the parameters


to modules: 10000 ms
Hot restart: 0 ms

Scan cycle
Update process image
cyclically: Yes
Scan cycle monitoring time: 150 ms
Minimum scan cycle time: 0 ms
Scan cycle load from
Communication: 20 %
Prioritized OCM communication: No
OB85 call up at I/O access error: Default mode of the CPU
Size of the process-image input 128
area:
Size of the process-image output 128
area:

Clock memory: No

Retentivity
Number of memory bytes starting at 16
MB0:
Number of S7 timers starting at 0
T0:
Number of S7 counters starting at 8
C0:

Hardware interrupts
OB40 - Priority: 16

Interrupts for DPV1


OB55 - Priority: 2
OB56 - Priority: 2
OB57 - Priority: 2

Time-delay interrupts
OB20 - Priority: 3
OB21 - Priority: 4

Asynchronous error interrupts


OB81 - Priority: 0
OB82 - Priority: 26
OB83 - Priority: 0
OB84 - Priority: 0
OB85 - Priority: 26
OB86 - Priority: 26
OB87 - Priority: 26

Time-of-day interrupts
OB10
Priority: 2
Active: No
Execution: None
Start date: 01/01/1994
Start time: 00:00

Cyclic interrupts
OB32
Priority: 9
Execution: 1000 ms
Phase offset: 0 ms
OB33
Priority: 10
Execution: 500 ms
Phase offset: 0 ms
OB34

µÚ Ò³/¹² Ò³
SIMATIC

Priority: 11
Execution: 200 ms
Phase offset: 0 ms
OB35
Priority: 12
Execution: 100 ms
Phase offset: 0 ms

System diagnostics
Expanded functional scope: No
Report cause of STOP: Yes
Acknowledgment-triggered No
reporting of SFB33-35:

Number of messages in the 10


diagnostics buffer:

Clock
Synchronization in the PLC
Synchronization type: None
Time interval: None
Synchronization on MPI
Synchronization type: None
Time interval: None
Correction factor: 0 ms

Protection level: No protection

Communication
Connection Resources Reserved for
PG communication: 1
OP communication: 1
S7 basic communication: 0
Max. Number of connection 8
resources:

Rack (0), Slot 2, Interface X2


Short description: DP
Order no.: - - -
Designation: DP
Width: 1
PROFIBUS address: 2
Highest PROFIBUS address: 126
Baud rate: 1.5 Mbps
Comment: - - -

Addresses
Inputs
Start: 2047
End: 2047

Synchronization mode: None


Time interval: None

Operating mode: DP Master

Rack (0), Slot 2, Interface 2


Short description: DI16/DO16
Order no.: - - -
Designation: DI16/DO16
Digital channels: 16 Inputs
16 Outputs
Width: 1

µÚ Ò³/¹² Ò³
SIMATIC

Comment: - - -

Addresses
Inputs
Start: 0
End: 1
Outputs
Start: 0
End: 1

Parameters

Input 0
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 1
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 2
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 3
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 4
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 5
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 6
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 7
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 8
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 9

µÚ Ò³/¹² Ò³
SIMATIC

Trigger for hardware interrupt


Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 10
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 11
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 12
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 13
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 14
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Input 15
Trigger for hardware interrupt
Rising (positive) edge: No
Falling (negative) edge: No
Input delay (ms): 3 ms

Rack (0), Slot 2, Interface 4


Short description: Count
Order no.: - - -
Designation: ¼ÆÊý
Width: 1
Comment: - - -

Addresses
Inputs
Start: 768
End: 783
Outputs
Start: 768
End: 783

Parameters
Basic settings
Interrupt selection: None

Operating mode: Not configured

Rack (0), Slot 4


Short description: AI2x12Bit
Order no.: 6ES7 331-7KB02-0AB0
Designation: AI2x12Bit

µÚ Ò³/¹² Ò³
SIMATIC

Analog channels: 2 Inputs


Width: 1
Comment: - - -

Addresses
Inputs
Start: 284
End: 287

Parameters
Basic settings
Enable for interrupt at
Limit exceeded: No
Diagnostics: No

Input 0 - 1
Diagnostic interrupt
Group diagnostics: No
Wire break: No
Measuring
Measuring type: current (4-wire transducer)
Measuring range: 4..20 mA
Integration time: 50 Hz
Limit alarm at
high limit: - - -
low limit: - - -

Rack (0), Slot 5


Short description: AI2x12Bit
Order no.: 6ES7 331-7KB02-0AB0
Designation: AI2x12Bit
Analog channels: 2 Inputs
Width: 1
Comment: - - -

Addresses
Inputs
Start: 288
End: 291

Parameters
Basic settings
Enable for interrupt at
Limit exceeded: No
Diagnostics: No

Input 0 - 1
Diagnostic interrupt
Group diagnostics: No
Wire break: No
Measuring
Measuring type: current (4-wire transducer)
Measuring range: 4..20 mA
Integration time: 50 Hz
Limit alarm at
high limit: - - -
low limit: - - -

DP master system:
Assigned master:

Short description DP
Order no.
Designation DP
Location

µÚ Ò³/¹² Ò³
SIMATIC

Station SIMATIC 300


Rack 0
Slot 2
Receptacle for interface 1
module

PROFIBUS address 2

Group: 1
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 2
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 3
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 4
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 5
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 6
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 7
Comment:
The group supports SYNC.
The group supports FREEZE.

Group: 8
Comment:
The group supports SYNC.
The group supports FREEZE.

Slave : MICROMASTER 4 PROFIBUS address: 10


Assigned to the groups:
Slave : MICROMASTER 4 PROFIBUS address: 11
Assigned to the groups:

Slave (10) MICROMASTER 4

µÚ Ò³/¹² Ò³
SIMATIC

Order number: 6SE640X-1PB00-0AA0


Family: Drives
DP slave type: MICROMASTER 4
Manufacturer: Siemens AG A&D
GSD file name: SI0280B5.GSE
GSD revision: 3
Identification number: 0x80b5
Revision of the DP slave: B01
Hardware release: B01
Software revision level: V1.0
Comment:
PROFIBUS address : 10
Diagnostic address: 2046
SYNC: Yes
FREEZE: Yes
Watchdog: Turned on
Parameter assignment in ascending byte sequence (hexadecimal specification) :
C4,00,00

DP ID: 0
Module description: 0 PKW, 6 PZD (PPO 4)
DP ID: 6AX
Module description: --> 0 PKW, 6 PZD (PPO 4)
Input address: 260
Output address: 260
Slave (11) MICROMASTER 4
Order number: 6SE640X-1PB00-0AA0
Family: Drives
DP slave type: MICROMASTER 4
Manufacturer: Siemens AG A&D
GSD file name: SI0280B5.GSE
GSD revision: 3
Identification number: 0x80b5
Revision of the DP slave: B01
Hardware release: B01
Software revision level: V1.0
Comment:
PROFIBUS address : 11
Diagnostic address: 2045
SYNC: Yes
FREEZE: Yes
Watchdog: Turned on
Parameter assignment in ascending byte sequence (hexadecimal specification) :
C4,00,00

DP ID: 0
Module description: 0 PKW, 6 PZD (PPO 4)
DP ID: 6AX
Module description: --> 0 PKW, 6 PZD (PPO 4)
Input address: 272
Output address: 272

Address overview

Addresses of: CPU 313C-2 DP


Address range from : 0
Address range to: 2047
Available address assignment: Yes
Rack / Slot: 0/2
Module Addr. fromAddr. to Type PIP DP PN FF R S IF
DI16/DO16 0 1 I OB1 PI - - - 0 2 2
6AX 260 271 I ---- 1(10) - - - 2 -

µÚ Ò³/¹² Ò³
SIMATIC

Module Addr. fromAddr. to Type PIP DP PN FF R S IF


6AX 272 283 I ---- 1(11) - - - 2 -
AI2x12Bit 284 287 I ---- - - - 0 4 -
AI2x12Bit 288 291 I ---- - - - 0 5 -
¼ÆÊý 768 783 I ---- - - - 0 2 4
MICROMASTER 4 2045 2045 I* - 1(11) - - - - -
MICROMASTER 4 2046 2046 I* - 1(10) - - - - -
DP 2047 2047 I* - - - - 0 2 1
DI16/DO16 0 1 Q OB1 PI - - - 0 2 2
6AX 260 271 Q ---- 1(10) - - - 2 -
6AX 272 283 Q ---- 1(11) - - - 2 -
¼ÆÊý 768 783 Q ---- - - - 0 2 4

µÚ Ò³/¹² Ò³

You might also like