Show Current Sun Position and Shadow of House (Generate SVG)

Getting the Sovol SV08 onto mainline Klipper

Filament Loading À la Prusa - A set of Klipper macros for filament loading

To fix and replace all of Sovol SV08 macros

A place to store the knowledge I have found about the SV08

A Flutter mobile app for Klipper/Moonraker

Devilishly Good Klipper Macros!

Getting the Sovol SV08 onto mainline Klipper

Implementation of ECG acquisition using ad8232 with esp32. ECG signal is transmitted through serial over BLE.

Open design/code version of ECG device based on esp32

Holter Dynamic ECG Monitoring device with ESP32 and AD8232.

Arduino ESP32 with AD8232 client software to transmit heart beat rate to MQTT server

IoT-based low-cost ECG monitoring system offers a transformative solution for democratizing access to cardiac care. By leveraging the power of the Internet of Things, this system provides continuou…

IoT based Low-cost ECG & Heart monitoring system with ESP32 and Ubidots Platform

The Network UPS Tools repository. UPS management protocol Informational RFC 9271 published by IETF at https://www.rfc-editor.org/info/rfc9271 Please star NUT on GitHub, this helps with sponsorships!

Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers

SV08 is a flying gantry Core-XY printer with a print area of 350x350x345mm, also a derivative work based on Voron V2.4. It aims to provide an alternative solution for 3D printing enthusiasts who ar…

Fluidd, the klipper UI.

G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)

Klipper Installation And Update Helper

sovol web control center

sovol klipper

ESPHome for the Xiaomi Mi Air Purifier 3H (and similar devices using the same protocol)

Command-line program to download videos from YouTube.com and other video sites

Klipper is a 3d-printer firmware

In-browser code editor