安全 (anzen) - safety; security

This goal of this library is to provide a high-level abstraction layer in Rust for the Sega Dreamcast. Currently, this project contains bindings to libronin to access and interact with the hardware, but the ultimate goal of this project is to remove the dependency and provide a Rust-only abstraction layer.

GCC13 added support for the Rust programming language as a front-end. In order to be able to build binaries for the SuperH4 processor, a custom build of the GCC toolchain is required.

Make sure the following libraries are installed on the host system:

sudo apt install gawk patch bzip2 tar make libgmp-dev libmpfr-dev libmpc-dev gettext wget libelf-dev texinfo bison flex sed git build-essential diffutils curl libjpeg-dev libpng-dev python3

Create the folder /opt/toolchains/dc-gccrs to hold all the source code and resulting binaries. Navigate to the new folder and checkout the latest version of the KallistiOS repository:

git clone -b gccrs https://github.com/KallistiOS/KallistiOS.git kos

Navigate to /opt/toolchains/dc-gccrs/kos/utils/dc-chain and run the following command:

cp config/config.mk.gccrs.sample config.mk

This will copy the default configuration for compiling GCCRS. Next, change the following variables in config.mk:

toolchains_base=/opt/toolchains/dc-gccrs
thread_model=single
auto_fixup_sh4_newlib=0

Note: If you would only like to use KallistiOS with Rust support, do not modify thread_model or auto_fixup_sh4_newlib in your configuration file.

Run make inside of the folder and a newly compiled toolchain should exist in /opt/toolchains/dc-gccrs/. Add /opt/toolchains/dc-gccrs/sh-elf/bin and /opt/toolchains/dc-gccrs/arm-eabi/bin to your PATH variable and everything should be set up!

If GCCRS was compiled for use with KallistiOS and not libanzen, follow these steps to compile KOS

In order to use the cargo command with GCCRS, a custom plugin has been developed to use with cargo. Using an existing Rust installation, run the following command to install the plugin:

cargo install --git https://github.com/spencerelliott/cargo-gccrs.git --branch main cargo-gccrs

This modified cargo-gccrs install allows the ability to modify the GCCRS binary used when compiling through environment variables.

Create a new binary cargo project:

cargo gccrs new --bin my_cool_project

The default main.rs generated will not be able to compile for our target, so replace it with the following code:

#![no_std]

#[no_mangle]
pub extern "C" fn main() -> u32 {
    return 0;
}

Additionally, add the following lines to Cargo.toml to make sure cargo will output an actual ELF binary:

[[bin]]
name = "my_cool_project.elf"
path = "src/main.rs"

Navigate to the libanzen folder using your terminal and run the following command:

./add_to_project.sh /path/to/my_cool_project

The script will handle copying over the required source files, libraries, and cargo configuration files needed to compile the resulting ELF binary. Make sure to run the add_to_project.sh script every time this repository is updated to make sure the latest sources are being used in a project.

Navigate to your project's directory and clean the project before building it for the first time:

GCCRS_INCOMPLETE_AND_EXPERIMENTAL_COMPILER_DO_NOT_USE=1 GCCRS_CUSTOM_BIN="sh-elf-gccrs" cargo gccrs clean

After cleaning for the first time, it should be possible to build the project using:

GCCRS_INCOMPLETE_AND_EXPERIMENTAL_COMPILER_DO_NOT_USE=1 GCCRS_CUSTOM_BIN="sh-elf-gccrs" cargo gccrs build

Both GCCRS_INCOMPLETE_AND_EXPERIMENTAL_COMPILER_DO_NOT_USE and GCCRS_CUSTOM_BIN can be added to your environment variables if you do not want to pass them to cargo each time.

GCCRS is currently very limited in path resolution for crates. In order to get around the limitations, libanzen copies all of the sources to your project directly. To use a specific module, add the following line to the top of your source file:

mod serial;
mod time;
...

Once a module has been added to your file, the specific structs and methods can be included like so:

use serial::Serial;

Currently, Rust support for the SuperH4 processor found in the Dreamcast is only available through GCCRS. Many of the features that are standard in Rust such as the standard library, borrow checking, and crate support are currently not available in GCCRS.

To get around these limitations, the source files for libanzen need to be copied directly into a project's source directory. A helper script (add_to_project.sh) has been provided in this repository to handle copying the required files into a project. In the future, when GCCRS has the ability to handle external crates, the helper script will be removed and this library will be able to be added to a project simply by adding a line to a project's Cargo.toml file.