A Go library to control your Elgato Stream Deck on Linux.
Make sure you have a working Go environment (Go 1.12 or higher is required). See the install instructions.
To install streamdeck, simply run:
go get github.com/Doridian/go-streamdeck
On Linux you need to set up some udev rules to be able to access the device as a
regular user. Edit /etc/udev/rules.d/99-streamdeck.rules and add these lines:
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fd9", ATTRS{idProduct}=="0060", MODE:="666", GROUP="plugdev"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fd9", ATTRS{idProduct}=="0063", MODE:="666", GROUP="plugdev"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fd9", ATTRS{idProduct}=="006c", MODE:="666", GROUP="plugdev"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fd9", ATTRS{idProduct}=="006d", MODE:="666", GROUP="plugdev"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fd9", ATTRS{idProduct}=="0080", MODE:="666", GROUP="plugdev"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fd9", ATTRS{idProduct}=="0090", MODE:="666", GROUP="plugdev"
Make sure your user is part of the plugdev group and reload the rules with
sudo udevadm control --reload-rules. Unplug and replug the device and you
should be good to go.
This is a modified fork of https://github.com/muesli/streamdeck