A collection of resources for Rack-mount equipment, from custom keystone ports to 10" and 19" rackable housings.

TODO : Add .obj/.3mf exports for easy 3D printing
TODO : Add assembly instructions
TODO : Add bill of materials
TODO : Add dimensional drawings
TODO : Add more photos of printed/assembled boxes
TODO : Add CAD parameters for side-by-side bolting of 10" boxes in a 19" rack

A customizable 10" rack box design, parametric and adaptable to different heights and depths.

The paramletric design is made with FreeCAD. You can download the FreeCAD project file.
By default, the box is configured as a 1U height and 180mm depth, with 5 Keystone ports on the front panel, 4 Keystone ports on the back, and two 40mm fan holes on the back side.
It is also possible to put two boxes side by side in a 19" rack, but the CAD has to be modified to allow bolting the boxes together.

TODO : Add .3mf exports for easy 3D printing

.OBJ file

TODO : Add .3mf exports for easy 3D printing

.OBJ file

TODO : Add .3mf exports for easy 3D printing

.OBJ file

Note : The Powerpole connectors in the CAD are only for illustration purposes.

TODO : Add .3mf exports for easy 3D printing TODO : Add pictures

.OBJ file

Work in progress
TODO : Add .3mf exports for easy 3D printing

.OBJ file

Made with ❤️, lots of ☕️, and lack of 🛌
Published under CreativeCommons BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.