What happened?
Often an error will trigger on a reload with a large number of workers when one workers gets mostly (or all) underground points.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
7174 ! Restarting simulation from time: 2024 4 2 70092.000000000000
7175 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
7176 Treating the following file as initial conditions: /p/work1/inchinp/simulations/taiwan/eq/20240402_70092.000000.h5
7177 full duration: 115200.00000000000 ; remaining simulation time: 45000.000000000000
7178 simulation start time: 70200.000000000000
7179 /p/work1/inchinp/simulations/taiwan/eq/inputs/simsize.h5 input dimensions: 256 256 256
7180 Target (output) grid structure dimensions: 256 256 256
7181 Sent ICs to workers in 1.463E+00 seconds.
7182 Initial conditions (root):
7183 ------------------------
7184 Min/max input density: 1.00E-20 1.00E-20
7185 Min/max input velocity: 0.00E+00 0.00E+00
7186 Min/max input temperature: 1.00E+02 1.00E+02
7187 Min/max input electric potential: 0.00E+00 0.00E+00
7188 Min/max input electric potential (full grid): 0.00E+00 0.00E+00
7189 Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG
7190 ERROR STOP input:plasma: too low maximum density dumped to /p/work1/inchinp/simulations/taiwan/eq/dump_nonfinite_plasma.h5
Relevant log output
No response
What happened?
Often an error will trigger on a reload with a large number of workers when one workers gets mostly (or all) underground points.
Relevant log output
No response