STM32H750VBT6/STM32H743VIT6 Core Board With 0.96'' TFT,TF Card,8MB QSPI FLASH,8MB SPI FLASH,DVP Port

Open-source PCB designs, schematics, and 3D-printable cases for ExpressLRS TX modules and receivers

UAV Autonomous Systems Management

This Arduino sketch expands the SBUS using an Arduino such as a small Ardiono Nano or ProMicro making the full 16 channels available on your FrSky compatile RC receiver (such as the XR8 or XR4) whi…

Five Nights at Epstein's - Simplified Chinese Version / 爱泼斯坦的五夜后宫 / 爱泼斯坦五夜后宫 / Five Nights at Epstein’s 简体中文版

Hardware design for NxPX4

Mini PX4 for UAV Group

A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

tinyPEPPER2 4in1 ESC

Portable MAVLink routing and telemetry dashboard for companion computers, GCS links, LTE, Wi-Fi, VPNs, UDP, and serial

ESP8266 WiFi Access Point and MAVLink Bridge

PX4 Hardware designs

24 channel, 100Msps logic analyzer hardware and software

Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

Telemetry application over RF (2.4 GHz) using FlySky Fs-i6x and STM32 Microcontroller

Flysky Ibus protocol library with STM32 HAL driver

Open Source Routing Machine - C++ backend

雷普先輩

直播源相关资源汇总 📺 💯 IPTV、M3U —— 勤洗手、戴口罩，祝愿所有人百毒不侵

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This…

PCB heatbed for Huxley sized RepRap 3D printer

Marlin is a firmware for RepRap 3D printers optimized for both 8 and 32 bit microcontrollers. Marlin supports all common platforms. Many commercial 3D printers come with Marlin installed. Check wit…

controller for 3D printer

A tensorflow.js node for Node-RED that enables to run custom trained Teachable Machine image classification online models.

NodeSource Node.js Binary Distributions

Klipper is a 3d-printer firmware