Weather station for PIMORONI Inky Impression (5.7") https://shop.pimoroni.com/products/inky-impression-5-7

• Raspberry Pi OS Trixie (Debian 13) or Bookworm (Debian 12)
• Python 3.11+
• Pimoroni Inky library v2.3.0+

This command will install all required libraries, enable SPI/I2C, and set up a cron job. This script may take 10 to 20 minutes on Pi 3 or older.

curl https://raw.githubusercontent.com/kotamorishi/weather-impression/main/install.sh | bash

After installation, edit ~/weather-impression/config.txt with your settings:

• Set LAT and LON to your location
• Set API_KEY from openweathermap.org (One Call API 3.0, free for 1,000 calls/day)

Then reboot, or test immediately:

~/.virtualenvs/weather-impression/bin/python3 ~/weather-impression/weather.py

For step-by-step manual installation, see MANUAL_INSTALL.md.

Use the physical buttons on the Inky Impression to switch modes.

• Weather icons: https://erikflowers.github.io/weather-icons/
• Roboto: https://fonts.google.com/specimen/Roboto