A firmware implementation for the R4TKN BW16 module featuring RTL8720DN Wi-Fi chip, ST7735 1.8" TFT display, and 3-button interface for Wi-Fi deauthentication functionality.
https://t.me/+2b0bppqzackxZTg1
- BW16 Module with RTL8720DN (Dual-Band Wi-Fi)
- 1.8" ST7735 TFT Display (128x160 resolution)
- 3 Tactile Buttons for user interface
- Dual-band 2.4GHz/5GHz Wi-Fi deauthentication
- TARGETED (PER CLIENT)
- RANDOM SSID
- BEACON + DEAUTH
- Interactive TFT display interface
- 3-button navigation control
V3
- TARGETED - (PER STATION)
- BATTERY FUEL UI INDICATOR
- More ..
| TFT Pin | BW16 Pin | Description |
|---|---|---|
| VCC | 3.3V | Power (3.3V) |
| GND | GND | Ground |
| SCL | PA14 | SPI Clock |
| SDA | PA12 | SPI Data |
| RES | PA26 | Reset |
| DC | PA25 | Data/Command |
| CS | PA27 | Chip Select |
| BLK | PA30 | Backlight (optional) |
| Button | BW16 Pin |
|---|---|
| SELECT | GPIOX |
| UP | PB1 |
| OK SELECT | PB3 |
| DOWN | PB2 |
Your support means a lot! If you find this project useful, please consider giving it a star on GitHub. It helps others discover the project and motivates further development.
Online Flasher - Ameba Flasher Online
The flasher is an unsigned Windows executable (.exe) and may be flagged by antivirus software.
-
Run as Administrator
- Right-click the R4TKN FLASHER and select
Run as administrator.
- Right-click the R4TKN FLASHER and select
-
Configure Serial Port
- Go to the
COM Portsection. - Under
COM, select the correct port for your connected BW16. - Leave the rest of the settings as default.
- Go to the
-
Put BW16 in Flash Mode & Start Flashing(If the bw16 have existing firmware please use the erase button then reflash)
- If your BW16 is not already in flash mode, do the following:
- Hold the BOOT button.
- While holding BOOT, press and release RESET.
- Release the BOOT button.
- The BW16 is now in flash mode.
- Now click the
Run FLASHbutton to flash the firmware.
- If your BW16 is not already in flash mode, do the following:
-
TFT Display Configuration Note
- The 1.8" ST7735 TFT display has multiple color configurations available.
- If you need a specific firmware binary for your display's color configuration, please let me know and I can provide the appropriate firmware version.
-
Completion
- Wait for the flashing process to complete (progress bar will show status).
- Once done, reset your BW16 to boot into the new firmware.
Got questions, ideas, or want to collaborate?
Drop an email at web.r4tkn@gmail.com