-
xmodem Public
XMODEM protocol implementation for Python
-
MeshTNC Public
Forked from datapartyjs/MeshTNCMeshTNC is a tool for piping LoRa data to and from consumer grade radios.
C MIT License UpdatedDec 15, 2025 -
-
sauce Public
Parser for SAUCE or Standard Architecture for Universal Comment Extensions
-
hiera-eyaml-secretbox Public
NaCl Secret Box asymmetric encryption back end
-
klipper Public
Forked from Klipper3d/klipperKlipper is a 3d-printer firmware
-
ipcalc Public
Python IP Calculator
-
caddy-dns-transip Public
Forked from bashopman/caddy-dns-transipGo MIT License UpdatedJun 21, 2024 -
boarddb Public
3D-printer control board definition
-
-
netflow Public
NetFlow version 1, 5, 7, 8, 9 & 10 (IPFIX) support for Go
-
ansi Public
ANSI cursor movement and graphics in Python
-
-
esphome-comfoair Public
Forked from wichers/esphome-comfoairESPHome configuration to drive Zehnder ComfoAir devices.
-
Traquair Public
🌋 Small format DIY crossed gantry 3D-printer
-
klipper_nano_expander Public
Forked from orobardet/klipper_nano_expanderKlipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
HTML MIT License UpdatedApr 11, 2023 -
-
moondeck Public
Stream Deck (compatible) interface for Klipper and Moonraker API
-
klipper-configurator Public
Klipper configurator for common printers based on various controller boards
Python GNU General Public License v3.0 UpdatedNov 21, 2022 -
PowerBRRR Public
48V injection daughter board for Step Stick drivers
-
diagram Public
Text mode diagrams using UTF-8 characters and fancy colors
-
-
VzBot-UserMods Public
Forked from VzBoT3D/VzBoT-UserModsCommunity modifications for the VzBot 3D-printer
UpdatedJan 6, 2022 -
natural Public
Convert data to their natural (human-readable) format
-
-
klipper-flsun-superracer Public
My Klipper configuration for the FLSUN SuperRacer
1 UpdatedJun 15, 2021 -
MoonWatch Public
Forked from rackrick/MoonWatchC++ GNU General Public License v3.0 UpdatedMay 28, 2021 -
vc Public archive
🔐 Vault Command Line (CLI) Client
-
getent Public archive
Python interface to the POSIX getent family of commands (getpwent, getgrent, getnetent, etc.)
-
rpi-rgb-led-matrix Public
Forked from hzeller/rpi-rgb-led-matrixControlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
C++ GNU General Public License v2.0 UpdatedJun 19, 2020
{{ message }}