Lightweight onewire protocol library for embedded systems. It uses UART peripheral or GPIO toggling

ESP32 ESP-IDF Components (I2C, 1-wire, SPI, ADC, etc.) GUVA-S12SD AHTXX AK8975 AS7341 BH1750FVI BME680 BMP280 BMP390 CCS811 ENS160 HDC1080 HMC5883L LTR390UV MMC56X3 MPU6050 SGP4X SHT4X SSD1306 TLV493D VEML7700 DS18B20 MAX31865

Non-Blocking One-wire (1-Wire) Library for STM32

1-wire slave emulation for MSP430 microcontrollers

Multi-bus clients for macOS and Linux, and bus-host board firmware for the RP2040.

Generic slave implementation of the 1-wire protocol in C

STM32 I2C HAL & LL library for the 1-Wire DS18B20

NTC thermistor to 1-Wire converter on Arduino Nano

1-wire bus master

SensorWatcher is a firmware for the ESP32 family of microcontrollers that automatically detects I2C, 1-Wire, or BLE sensors and uploads the sensor measurements to backends using HTTP, MQTT, or UDP.

STM32F103C8 (BluePill) based temperature node with relay

STM32 BluePill SCServo (Waveshare/FeeTech) library port for LL

STM8L 1-Wire UART lib

1-wire bus master driver

Allows to manage a 1-Wire bus through a digital pin of an ATmega chip.

DS2482 I2C to 1-Wire master ChibiOS 16.x driver on STM32F103C8T6

A small web server to give access to physical sensors

ESP-IDF's component implements 1-wire communication to interface with temperature and humidity sensors such as DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321), SI7021,... The data from sensors is automatically and periodically updated or refreshed by the user at any time. 

Firmware of a small STM32F103C8T6 and DS18B20 thermometer

KinCony ESP32-S3 Core Development Board RTU, I2C, 1-wire Demo Application, demonstrates sensor interfacing over serial MODBUS, over I2C, and one-wire.