This repository is the demo code for the PIC18F16Q40 device on the Low Pin Count (LPC) curiosity board.

Compare the performance of the integrated OPAMP with a simulation of the device.

Analog digital hybrid Pebble watchface

This repository is the demo code for the PIC18F16Q41 device on the Low Pin Count (LPC) curiosity board.

This application demos the OPAMP as a Programmable Gain Amplifier (PGA) for the ADC.

Driver for the PulseSensor PPG heart rate sensor

Convert Analog Input To Digital Output On LPCXpresso43xx Development Board

Collection of Analog Synthesizer Modules

In this example, we will show how to toggle a LED on and off for 500 milliseconds as well as showing how to create an analog-serial-read using a terminal emulator and potentiometer.

This example uses the ADC to make a reading, converts the reading to a PWM duty-cycle used to dim a LED. printf() output is routed to EDBG USART.

Example of Server (Linux) and Client (Windows) with Arduino reading temperature sensor

Digital (Analog) Clock

Demonstrates basic ADC communication on PIC32CM JH devices using MPLAB X and Harmony v3

A demo based on the dual op amps on the q71, and their configurations within mcc.

This example will demonstrate how to interface the MCP6022-Microphone on-board the Curiosity Nano Explorer development board using ADC protocol.

This demo demonstrates the Programmable Gain Amplifier (PGA) in the ADC.

Project for humidity analog sensor

🛡️ Empower your digital defenses with Moat, an intelligent barrier that detects threats before they strike, safeguarding your online realm.

Analog Clock for Linux