Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

ESPHome configuration for a DIY indoor air quality monitor for CO₂ concentration, PM2.5 and PM10 concentrations, and temperature, humidity and pressure

Apache Mynewt Sensor Network Application for STM32 Blue Pill and nRF52 with Visual Rust, NB-IoT, GPS, iBeacon, NimBLE, ESP8266 (WiFi Geolocation) and nRF24L01

Wi-Fi sensor based on XIAO ESP32-C6

Sample code for reading values from a BME280 temperature-humidity-pressure sensor, via ESP-IDF's I2C master driver, supports both normal mode and forced mode described in the datasheet. https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf

BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.

ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace

A simple Prometheus exporter for metrics from Bosch BME280 sensors for ESP8266 based boards with NodeMCU firmware.

Zephyr-based firmware to upload sensor data via Apple's Find My network

Arduino sketch for a High Altitude Balloon tracker for ESP32 and sx127x, sx126x, RF69, LLCC68 or RFM9x. Supports LoRa, LoRa-APRS and APRS, RTTY, Horus V1 4FSK, Horus V2 4FSK, Horus V3 4FSK and SSDV. Supports LoRa uplink.

nRF24LE1 remote sensor module, support DHT21/22, DS18B20, photoresistor as light sensor, AES encryption

Example esp-idf code for the Espressif ESP32 to communicate with BME280, INA226, INA228 and ADXL345

ESP-IDF demo application that reads temperature from BME280 sensor then sends the reading over MQTT.

Yet Another Environment Sensor Aggregator

Using BME280 sensor from Bosch at AVR mikrocontrollers like Atmega328p

Proyecto T-Display-S3 y BME280 con Arduino IDE

C code for Raspberry Pi / BME280 pressure & humidity sensor

Ant+ Temperature Humidity and Atmospheric Pressure sensor using Nordics' nrf52832 and Bosh's' BME280

NRF52832 + BME280 Wireless Sensor

BME280 Library for STM32 Using HAL I2C