Do it yourself battery management system for Lithium ion battery packs/cells

Software for diyBMS v4

This is an Arduino library providing an emulation of the CAN communication protocol of the BMS (battery management system) on a Renault Twizy.

yet another beatgame.

ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v14 & v15) using RS485 internal network.

Converts the JK-BMS RS485 data to Pylontech CAN data

Battery cell monitor and balancer

Reads data from the Sage BMS console port and publishes to MQTT

An improved web based battery monitoring system for SP15S020 BMS

BMS capable of SOC/SOH determination, passive cell balancing, over voltage, over current and over temperature protection determination using Arduino and BQ769X0 ICs. Make connections as per datasheet of BQ 769X0 IC.

Reverse Engineering BQ27500EVM Kit and the EV2300

Work in progress. Single ESP32 monitoring and balancing multiple cell Li-Ion battery.

Battery management system for your FPV goggles.

can use this user friendly code for different sensor projects.this code is basic frame of most of the projects esp 32 with sd card storage module

Read Xiaoxiang BMS data through BLE on Adafruit nrf52 devices

arcin firmware for beatmania IIDX controllers - native support for Infinitas, LR2, beatoraja

Collection of QoL and whatever for Lunatic Rave 2

This project is a D3D wrapper that is compatible with Falcon BMS 4.34 U3, 4.34 U4, and 4.35 servers. It stops rendering when the server goes into 3D, and enables rendering when the server comes back to 2D.

A simple Bank Management System in C++. It allows users to perform various operations such as creating a new account, depositing money, withdrawing money, checking account details, modifying account information, deleting accounts, and viewing all existing accounts.

Repositorio con el diseño de un BMS y una batería como TFM