IMSProg - software for CH341A-based programmers to work with I2C, SPI and MicroWire EEPROM/Flash chips

USB device to I²C master adapter with Linux kernel support

Text only Arduino Library for SSD1306 OLED displays

I2C bus wire length extension module. Enabling the use of more extensive bus interconnection.

I²C bus differential pressure sensor with IMU and Magnetometer.

High-accuracy barometric pressure and temperature sensing module with MS561101BA03.

This is a fork of the New Liquid Crystal Library by Francisco Malpartida

This 4-pin module connects JST-GH connectors, often used in Pixhawk drones, to standard pin headers, making it easier to build custom electronics and use I2C or CAN bus communication.

ESC for BLDC motors for UAVs with I2C interface

Guide For Working With AVR Microcontrollers.

Using Python、HTML、Bootstrap、Raspberry-Pi to build an environment detection and plant-care system.

I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.

Arduino Simulation of Hyperloop Pod Control and Communication

esp8266 framework ver.2

This repository is for research under the Wagner grant. The repository will contain files associated with research and creation of Cyber Security modules.

A Node for reading a TMP102 temperature sensor via I2C.

Frontend Website I2C UAJY 2019

A reliable shield designed to ensure safe and isolated communication between the Jetson Nano and other embedded platforms.

IMSProg - software for CH341A-based programmers to work with I2C, SPI and MicroWire EEPROM/Flash chips (Latvian translation)

In this project, the Bosch BMP280 sensor is integrated with an STM32 microcontroller using bare-metal, low-level register-based firmware. Communication is handled via I2C and SPI protocols. The firmware captures sensor data and outputs it to a 16x2 LCD display, demonstrating effective real-time data acquisition and display.