Skip to content

vhosakot/k8s_cisco_aci

BranchesTags

Repository files navigation

CCP ACI REST service

This repo has a RESTful server needed to create and delete configurations asynchronously on the ACI fabric using the acc-provision tool and REST APIs for each CCP tenant cluster.

Architecture

                                           _________________
                                           |               |
    CCP tenant     <-->     CCP       <--> |   CCP ACI     |  <--> acc-provision <--> ACI fabric
Kubernetes cluster      control plane      |  REST service |
                                           |   ^        ^  |
                                           |   |        |  |
                                           |   |        |  |
                              |------------|   |        |  |-----------------|
                              |                v        v                    |
                              |  Allocator class <--> etcd database storing  |
                              |                       per-cluster state      |
                              |                       (sidecar container)    |
                              |                                              |
                              |----------------------------------------------|
                                         CCP ACI service pod in k8s

After configuring the ACI fabric, the CCP ACI REST service returns the ACI CNI as a json needed for kubernetes in the HTTP response.

Steps to build and run the Docker container with CCP ACI REST service

Build Docker image

git clone git@github.com:contiv/ccp_aci_service.git
cd ccp_aci_service
./build_image.sh

$ sudo docker images | grep ccp-aci-service
ccp-aci-service       latest              046c19d8d0ff        About a minute ago   1.2GB

The docker image is available in Docker Hub at https://hub.docker.com/r/contiv/ccp_aci_service/. Instead of building the docker image, to pull the image from Docker Hub, run:

docker pull contiv/ccp_aci_service

The CCP ACI REST service needs etcd database running and reachable

Start etcd database in a Docker container:

sudo docker run -d -p 2379:2379 --name etcd-3 --net=host \
    k8s.gcr.io/etcd-amd64:3.1.11 \
    etcd --listen-client-urls http://0.0.0.0:2379 \
    --advertise-client-urls http://0.0.0.0:2379

$ sudo docker ps -a | grep etcd
16a05e186ff3        k8s.gcr.io/etcd-amd64:3.1.11   "etcd --listen-clien…"   6 minutes ago    Up 6 minutes    etc-3

Run CCP ACI REST service in Docker container

sudo docker run --name ccp-aci-service --net=host -d -p 46802:46802 ccp-aci-service

$ sudo docker ps -a | grep ccp-aci-service
b6ba236f2c82     ccp-aci-service    "/ccp_aci_ser…"   2 minutes ago   Up 2 minutes   ccp-aci-service

If the docker image is not built but pulled from Docker Hub, to run the image pulled from Docker Hub, run:

sudo docker run --name ccp-aci-service --net=host -d -p 46802:46802 contiv/ccp_aci_service

(Optional) To use non-default IP address and non-default port

The default port used by the CCP ACI service 46802. The default port used by etcd is 2379.

To use the following non-default values:

CCP ACI service listening at 10.10.10.10 and port 46808, and etcd listening at 20.20.20.20 and port 3379, run:

sudo docker run --name ccp-aci-service --net=host -d -p 46808:46808 ccp-aci-service \
    sh -c "/ccp_aci_server.py --ip 10.10.10.10 --port 46808 20.20.20.20:3379"

$ sudo docker ps -a | grep ccp-aci-service
18f4ab9c9bf6    ccp-aci-service    "sh -c '/ccp_…"   8 seconds ago    Up 6 seconds     ccp-aci-service

Check the output of REST server in the container logs

NOTE: Make sure that the host running the ccp-aci-service container can ping the ACI APIC fabric.

$ sudo docker logs ccp-aci-service
 * Running on http://0.0.0.0:46802/ (Press CTRL+C to quit)
 * Restarting with stat
 * Debugger is active!
 * Debugger PIN: 161-563-901

(Optional) Exec into the container and check the CCP ACI REST service

$ sudo docker exec -it ccp-aci-service /bin/bash
root@vhosakot-contiv-vpp:/ccp-aci-certs# ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 14:49 ?        00:00:00 /usr/bin/python /ccp_aci_server.
root        17     1  1 14:49 ?        00:00:01 /usr/bin/python /ccp_aci_server.
root       147     0  0 14:50 pts/0    00:00:00 /bin/bash
root       157   147  0 14:50 pts/0    00:00:00 ps -ef
root@vhosakot-contiv-vpp:/ccp-aci-certs# pwd
/ccp-aci-certs
root@vhosakot-contiv-vpp:/ccp-aci-certs# ls -l / | grep 'ccp_aci_service_version\|py$'
-rw-rw-r--   1 root root  8912 Mar  5 03:25 allocator.py
-rwxrwxrwx   1 root root  9628 Mar  5 13:49 ccp_aci_server.py
-rw-rw-r--   1 root root    41 Mar  5 03:25 ccp_aci_service_version
-rwxrwxr-x   1 root root 24259 Mar  5 03:25 server.py
root@vhosakot-contiv-vpp:/ccp-aci-certs# exit

curl the CCP ACI REST service to see the REST API operations supported

172.18.7.254 below is the IP address of the host that runs the ccp-aci-service container.

$ curl 172.18.7.254:46802
{
  "acc-provision": {
    "git_sha1": "eb1b634959fd6925c7c75e1ecb250209fdbc8f73", 
    "url": [
      "HTTP POST   /api/v1/acc_provision_create", 
      "HTTP DELETE /api/v1/acc_provision_delete", 
      "HTTP GET    /api/v1/acc_provision_status", 
      "HTTP GET    /"
    ], 
    "version": "1.8.0"
  }
}

The above url 172.18.7.254:46802 can be used for httpGet of kubernetes' livenessProbe to probe the health of this service in k8s. This url makes sure that:

  • etcd database is up
  • acc-provision tool works
  • The CCP ACI service is up

git_sha1 above is the git SHA1 of the latest commit in this repo and version above is the version of acc-provision tool.

Run the CCP ACI client python_client/ccp_aci_client to create configurations on the ACI fabric asynchronously using HTTP POST

This is HTTP POST to endpoint /api/v1/acc_provision_create.

172.18.7.254 below is the IP address of the host that runs the ccp-aci-service container. admin is the ACI APIC username, cisco123! is the ACI APIC password. 10.23.231.5 below is the IP address of ACI APIC. create / status / delete is the HTTP operation. 1.7 is the kubernetes version.

$ cd python_client
$ ./ccp_aci_client 172.18.7.254 my_cluster1 admin cisco123! create \
      --aci_apic_hosts 10.23.231.5 --k8s_version 1.7

status code =  202
HTTP response =  {
    "response": "Request accepted to create ACI configs. Use http endpoint /api/v1/acc_provision_status to get the ACI CNI for the cluster."
}

Run the CCP ACI client python_client/ccp_aci_client to get the ACI CNI as a json needed for kubernetes using HTTP GET

This is HTTP GET from endpoint /api/v1/acc_provision_status.

$ cd python_client
$ ./ccp_aci_client 172.18.7.254 my_cluster1 admin cisco123! status

Done! ACI CNI YAML file is aci_cni_my_cluster1.yaml in the current directory

$ ls -l aci_cni_my_cluster1.yaml
-rw-rw-r-- 1 ubuntu ubuntu 13767 Mar  2 19:15 aci_cni_my_cluster1.yaml

The above step creates the ACI CNI YAML file aci_cni_my_cluster1.yaml in the current directory. This can be used to install ACI CNI in kubernetes using the command:

sudo kubectl apply -f aci_cni_my_cluster1.yaml

Use the ACI CNI YAML file aci_cni_my_cluster1.yaml in the current directory to install ACI CNI on kubernetes

Make sure that there is no other CNI running in kubernetes. If so, do sudo kubeadm reset on all the nodes, reboot all the nodes, do sudo kubeadm init on the master node, do kubeadm join --token ... on all the worker nodes, wait for 5 minutes, and then install the ACI CNI YAML aci_cni_my_cluster1.yaml on kubernetes.

$ sudo kubectl apply -f aci_cni_my_cluster1.yaml
configmap "aci-containers-config" created
secret "aci-user-cert" created
serviceaccount "aci-containers-controller" created
serviceaccount "aci-containers-host-agent" created
clusterrole "aci-containers:controller" created
clusterrole "aci-containers:host-agent" created
clusterrolebinding "aci-containers:controller" created
clusterrolebinding "aci-containers:host-agent" created
daemonset "aci-containers-host" created
daemonset "aci-containers-openvswitch" created
deployment "aci-containers-controller" created

$ kubectl get pods -n=kube-system | grep -i aci-c
aci-containers-controller-2834261735-7q3ql           1/1       Running            0          3m
aci-containers-host-1pfdt                            3/3       Running            0          3m
aci-containers-host-jx4m6                            3/3       Running            0          3m
aci-containers-host-p5xbt                            3/3       Running            0          3m
aci-containers-openvswitch-h1q2f                     1/1       Running            0          3m
aci-containers-openvswitch-ppmsd                     1/1       Running            0          3m
aci-containers-openvswitch-ttnrj                     1/1       Running            0          3m

Make sure that the my_cluster1 tenant is created in the "Tenants" tab in the ACI APIC fabric at https://10.23.231.5.

(Optional) Check the state stored by the CCP ACI service in etcd database

sudo docker exec -it -e ETCDCTL_API=3 etcd-3 etcdctl get --prefix /

Run the CCP ACI client python_client/ccp_aci_client to delete configurations on the ACI fabric asynchronously using HTTP DELETE

This is HTTP DELETE to endpoint /api/v1/acc_provision_delete.

$ cd python_client
$ ./ccp_aci_client 172.18.7.254 my_cluster1 admin cisco123! delete

status code =  202
HTTP response =  {
    "response": "Request accepted to delete ACI configs. Use http endpoint /api/v1/acc_provision_status to get the status."
}

Run the CCP ACI client python_client/ccp_aci_client to make sure that ACI configurations are successfully deleted using HTTP GET

This is HTTP GET from endpoint /api/v1/acc_provision_status.

$ cd python_client
$ ./ccp_aci_client 172.18.7.254 my_cluster1 admin cisco123! status

status code =  404
HTTP response =  {
    "error": "ERROR: ACI CNI not found for cluster. Use http endpoint /api/v1/acc_provision_create to create (POST) configs on ACI first, and then use this endpoint to get the ACI CNI for the cluster. If http endpoint /api/v1/acc_provision_delete was used to delete the ACI configs, then this message means the deletion was successful."
}

The above HTTP return code 404 means that the ACI configurations were successfully deleted on the ACI fabric.

Make sure that the my_cluster1 tenant is deleted in the "Tenants" tab in the ACI APIC fabric at https://10.23.231.5.

Stop the containers, remove them and remove the images

sudo docker stop ccp-aci-service
sudo docker rm ccp-aci-service
sudo docker stop etcd-3
sudo docker rm etcd-3
sudo docker rmi -f ccp-aci-service
sudo docker rmi -f k8s.gcr.io/etcd-amd64:3.1.11

Download the acc-provision tool from https://software.cisco.com/download/type.html?mdfid=285968390&i=rm:

APIC OpenStack and Container Plugins --> 3.1 --> Debian packages for ACI Kubernetes 1.7 tools

Useful directories

  • The kubernetes manifest YAML files to install the k8s deployment and service for the CCP ACI server are in the directory k8s.

  • The helm chart and instructions to install CCP ACI service using helm is in the k8s/helm directory.

  • The API spec for HTTP clients are in the directory api_spec/api_spec.md.

  • sudo make install will install the acc-provision tool along with the required pip and apt-get dependecies needed for this repo on an Ubuntu host.

  • The ACI configurations for server/allocator.py can be specified in server/aci.conf and in the configMap k8s/configmap.yaml on kubernetes.

Testing

Stop and remove etcd container if running:

sudo docker ps -a | grep -i etcd

Run the following steps to run the tests for server/allocator.py:

sudo pip install -r requirements.txt
sudo make tests

About

REST API server to configure Cisco’s ACI with Kubernetes

Topics

docker kubernetes cisco containers aci cni

Resources

Readme

License

View license
Activity

Stars

1 star

Watchers

0 watching

Forks

1 fork
Report repository

Releases

No releases published

Packages

 
 
 

Contributors

Languages