1. Install this add-on.
2. Open Bible Memorizer (Tools → Bible Memorizer)
3. Copy your scripture into the text box. Each new line is a new note. It is best to add a line break after each verse (one verse per line) or to break the verse into several parts (one part per line). You should include the verse number at the beginning of each new verse.
4. For every note there are three cards (or four if you checked the box "Create Table").

• 1 verse = all lines until a there is a new verse number at the beginning of a line.
• If you don't use verse numbers at all, you are limited to 26 "verses", because there are not more letters in the alphabet :)
• "Table Cards" are only created if you have more then 4 verses. They are not created by default.

Tools → Bible Memorizer

Import

Card 1

Card 2

The Recite Chapter feature lets you recite a whole passage from memory — without touching your card schedule.

1. Open the dialog via Tools → Recite Text.
2. Choose the passage you want to recite from the dropdown.
3. Verses are revealed one by one. Each verse is shown at a detail level that matches its current learning state:
   • Verse number only — mature cards (interval ≥ 21 days)
   • First letters — young review cards
   • Last letters — new / learning / relearning cards
   • Full text — fully revealed

You can also click any verse directly to reveal one more level of detail for that verse.

Tools → Recite Text

Recite dialog

If you used and installed this add-on before April 2025 you may have some empty cards. You can remove them with Tools → Empty Cards.