--- *mini.align* Align text interactively

--- *MiniAlign*

---

--- MIT License Copyright (c) 2022 Evgeni Chasnovski

---

--- ==============================================================================

---

--- Rich and flexible customization of both alignment rules and user interaction.

--- Works with charwise, linewise, and blockwise selections in both Normal mode

--- (on textobject/motion; with dot-repeat) and Visual mode.

---

--- Features:

--- - Alignment is done in three main steps:

--- - <Split> lines into parts based on Lua pattern(s) or user-supplied rule.

--- - <Justify> parts for certain side(s) to be same width inside columns.

--- - <Merge> parts to be lines, with customizable delimiter(s).

--- Each main step can be preceded by other steps (pre-steps) to achieve

--- highly customizable outcome. See `steps` value in |MiniAlign.config|. For

--- more details, see |MiniAlign-glossary| and |MiniAlign-algorithm|.

---

--- - User can control alignment interactively by pressing customizable modifiers

--- (single keys representing how alignment steps and/or options should change).

--- Some of default modifiers:

--- - Press `s` to enter split Lua pattern.

--- - Press `j` to choose justification side from available ones ("left",

--- "center", "right", "none").

--- - Press `m` to enter merge delimiter.

--- - Press `f` to enter filter Lua expression to configure which parts

--- will be affected (like "align only first column").

--- - Press `i` to ignore some commonly unwanted split matches.

--- - Press `p` to pair neighboring parts so they be aligned together.

--- - Press `t` to trim whitespace from parts.

--- - Press `<BS>` (backspace) to delete some last pre-step.

--- For more details, see |MiniAlign-modifiers-builtin| and |MiniAlign-examples|.

---

--- - Alignment can be done with instant preview (result is updated after each

--- modifier) or without it (result is shown and accepted after non-default

--- split pattern is set).

---

--- - Every user interaction is accompanied with helper status message showing

--- relevant information about current alignment process.

---

--- # Setup~

---

--- This module needs a setup with `require('mini.align').setup({})` (replace

--- `{}` with your `config` table). It will create global Lua table `MiniAlign`

--- which you can use for scripting or manually (with `:lua MiniAlign.*`).

---

--- See |MiniAlign.config| for available config settings.

---

--- You can override runtime config settings (like `config.modifiers`) locally

--- to buffer inside `vim.b.minialign_config` which should have same structure

--- as `MiniAlign.config`. See |mini.nvim-buffer-local-config| for more details.

---

--- To stop module from showing non-error feedback, set `config.silent = true`.

---

--- # Comparisons~

---

--- - 'junegunn/vim-easy-align':

--- - 'mini.align' is mostly designed after 'junegunn/vim-easy-align', so

--- there are a lot of similarities.

--- - Both plugins allow users to change alignment options interactively by

--- pressing modifier keys (albeit completely different default ones).

--- 'junegunn/vim-easy-align' has those modifiers fixed, while 'mini.align'

--- allows their full customization. See |MiniAlign.config| for examples.

--- - 'junegunn/vim-easy-align' is designed to treat delimiters differently

--- than other parts of strings. 'mini.align' doesn't distinguish split

--- parts from one another by design: splitting is allowed to be done

--- based on some other logic than by splitting on delimiters.

--- - 'junegunn/vim-easy-align' initially aligns by only first delimiter.

--- 'mini.align' initially aligns by all delimiter.

--- - 'junegunn/vim-easy-align' implements special filtering by delimiter

--- row number. 'mini.align' has builtin filtering based on Lua code

--- supplied by user in modifier phase. See |MiniAlign.gen_step.filter|

--- and 'f' builtin modifier.

--- - 'mini.align' treats any non-registered modifier as a plain delimiter

--- pattern, while 'junegunn/vim-easy-align' does not.

--- - 'mini.align' exports core Lua function used for aligning strings

--- (|MiniAlign.align_strings()|).

--- - 'godlygeek/tabular':

--- - 'godlygeek/tabular' is mostly designed around single command which is

--- customized by printing its parameters. 'mini.align' implements

--- different concept of interactive alignment through pressing

--- customizable single character modifiers.

--- - 'godlygeek/tabular' can detect region upon which alignment can be

--- desirable. 'mini.align' does not by design: use Visual selection or

--- textobject/motion to explicitly define region to align.

---

--- # Disabling~

---

--- To disable, set `vim.g.minialign_disable` (globally) or `vim.b.minialign_disable`

--- (for a buffer) to `true`. Considering high number of different scenarios

--- and customization intentions, writing exact rules for disabling module's

--- functionality is left to user. See |mini.nvim-disabling-recipes| for common

--- recipes.

--- Glossary

---

--- PARTS 2d array of strings (array of arrays of strings).

--- See more in |MiniAlign.as_parts()|.

---

--- ROW First-level array of parts (like `parts[1]`).

---

--- COLUMN Array of strings, constructed from parts elements with the same

--- second-level index (like `{ parts[1][1],` `parts[2][1], ... }`).

---

--- STEP A named callable. See |MiniAlign.new_step()|. When used in terms of

--- alignment steps, callable takes two arguments: some object (parts

--- or string array) and option table.

---

--- SPLIT Process of taking array of strings and converting it into parts.

---

--- JUSTIFY Process of taking parts and converting them to aligned parts (all

--- elements have same widths inside columns).

---

--- MERGE Process of taking parts and converting it back to array of strings.

--- Usually by concatenating rows into strings.

---

--- REGION Table representing region in a buffer. Fields: <from> and <to> for

--- inclusive start and end positions (<to> might be `nil` to describe

--- empty region). Each position is also a table with line <line> and

--- column <col> (both start at 1).

---

--- MODE Either charwise ("char", `v`, |charwise|), linewise ("line", `V`,

--- |linewise|) or blockwise ("block", `<C-v>`, |blockwise-visual|)

---@tag MiniAlign-glossary

--- Algorithm design

---

--- There are two main processes implemented in 'mini.align': strings alignment

--- and interactive region alignment. See |MiniAlign-glossary| for more information

--- about used terms.

---

--- Strings alignment ~

---

--- Main implementation is in |MiniAlign.align_strings()|. Its input is array of

--- strings and output - array of aligned strings. The process consists from three

--- main steps (split, justify, merge) which can be preceded by any number of

--- preliminary steps (pre-split, pre-justify, pre-merge).

---

--- Algorithm:

--- - <Pre-split>. Take input array of strings and consecutively apply all

--- pre-split steps (`steps.pre_split`). Each one has `(strings, opts)` signature

--- and should modify array in place.

--- - <Split>. Take array of strings and convert it to parts with `steps.split()`.

--- It has `(strings, opts)` signature and should return parts.

--- - <Pre-justify>. Take parts and consecutively apply all pre-justify

--- steps (`steps.pre_justify`). Each one has `(parts, opts)` signature and

--- should modify parts in place.

--- - <Justify>. Take parts and apply `steps.justify()`. It has `(parts, opts)`

--- signature and should modify parts in place.

--- - <Pre-merge>. Take parts and consecutively apply all pre-merge

--- steps (`steps.pre_merge`). Each one has `(parts, opts)` signature and

--- should modify parts in place.

--- - <Merge>. Take parts and convert it to array of strings with `steps.merge()`.

--- It has `(parts, opts)` signature and should return array of strings.

---

--- Notes:

--- - All table objects are initially copied so that modification in place doesn't

--- affect workflow.

--- - Default main steps are designed to be controlled via options. See

--- |MiniAlign.align_strings()| and default step entries in |MiniAlign.gen_step|.

--- - All steps are guaranteed to take same option table as second argument.

--- This allows steps to "talk" to each other, i.e. earlier steps can pass data

--- to later ones.

---

--- Interactive region alignment ~

---

--- Interactive alignment is a main entry point for most users. It can be done

--- in two flavors:

--- - <Without preview>. Initiated via mapping defined in `start` of

--- `MiniAlign.config.mappings`. Alignment is accepted once split pattern becomes

--- non-default.

--- - <With preview>. Initiated via mapping defined in `start_with_preview` of

--- `MiniAlign.config.mappings`. Alignment result is shown after every modifier

--- and is accepted after `<CR>` (`Enter`) is hit. Note: each preview is done by

--- applying current alignment steps and options to the initial region lines,

--- not the ones currently displaying in preview.

---

--- Lifecycle (assuming default mappings):

--- - <Initiate alignment>:

--- - In Normal mode type `ga` (or `gA` to show preview) followed by textobject

--- or motion defining region to be aligned.

--- - In Visual mode select region and type `ga` (or `gA` to show preview).

--- Strings contained in selected region will be used as input to

--- |MiniAlign.align_strings()|.

--- Beware of mode when selecting region: charwise (`v`), linewise (`V`), or

--- blockwise (`<C-v>`). They all behave differently.

--- - <Press modifiers>. Press single keys one at a time:

--- - If pressed key is among table keys of `modifiers` table of

--- |MiniAlign.config|, its function value is executed. It usually modifies

--- some options(s) and/or affects some pre-step(s).

--- - If pressed key is not among defined modifiers, it is treated as plain

--- split pattern.

--- This process can either end by itself (usually in case of no preview and

--- non-default split pattern being set) or you can choose to end it manually.

--- - <Accept or discard>. In case of active preview, accept current result by

--- pressing `<CR>`. Discard any result and return to initial regions with

--- either `<Esc>` or `<C-c>`.

---

--- See more in |MiniAlign-modifiers-builtin| and |MiniAlign-examples|.

---

--- Notes:

--- - Visual blockwise selection works best with 'virtualedit' equal to "block"

--- or "all".

---@tag MiniAlign-algorithm

--- Overview of builtin modifiers

---

--- All examples assume interactive alignment with preview in linewise mode. With

--- default mappings, use `V` to select lines and `gA` to initiate alignment. It

--- might be helpful to copy lines into modifiable buffer and experiment yourself.

---

--- Notes:

--- - Any pressed key which doesn't have defined modifier will be treated as

--- plain split pattern.

--- - All modifiers can be customized inside |MiniAlign.setup|. See "Modifiers"

--- section of |MiniAlign.config|.

---

--- Main option modifiers ~

---

--- <s> Enter split pattern (confirm prompt by pressing `<CR>`). Input is treated

--- as plain delimiter.

---

--- Before: >

--- a-b-c

--- aa-bb-cc

--- <

--- After typing `s-<CR>`: >

--- a -b -c

--- aa-bb-cc

--- <

--- <j> Choose justify side. Prompts user (with helper message) to type single

--- character identifier of side: `l`eft, `c`enter, `r`ight, `n`one.

---

--- Before: >

--- a_b_c

--- aa_bb_cc

--- <

--- After typing `_jr` (first make split by `_`): >

--- a_ b_ c

--- aa_bb_cc

--- <

--- <m> Enter merge delimiter (confirm prompt by pressing `<CR>`).

---

--- Before: >

--- a_b_c

--- aa_bb_cc

--- <

--- After typing `_m--<CR>` (first make split by `_`): >

--- a --_--b --_--c

--- aa--_--bb--_--cc

--- <

--- Modifiers adding pre-steps ~

---

--- <f> Enter filter expression. See more details in |MiniAlign.gen_step.filter()|.

---

--- Before: >

--- a_b_c

--- aa_bb_cc

--- <

--- After typing `_fn==1<CR>` (first make split by `_`): >

--- a _b_c

--- aa_bb_cc

--- <

--- <i> Ignore some split matches. It modifies `split_exclude_patterns` option by

--- adding commonly wanted patterns. See more details in

--- |MiniAlign.gen_step.ignore_split()|.

---

--- Before: >

--- /* This_is_assumed_to_be_comment */

--- a"_"_b

--- aa_bb

--- <

--- After typing `_i` (first make split by `_`): >

--- /* This_is_assumed_to_be_comment */

--- a"_"_b

--- aa _bb

--- <

--- <p> Pair neighboring parts.

---

--- Before: >

--- a_b_c

--- aaa_bbb_ccc

--- <

--- After typing `_p` (first make split by `_`): >

--- a_ b_ c

--- aaa_bbb_ccc

--- <

--- <t> Trim parts from whitespace on both sides (keeping indentation).

---

--- Before: >

--- a _ b _ c

--- aa _bb _cc

--- <

--- After typing `_t` (first make split by `_`): >

--- a _b _c

--- aa_bb_cc

--- <

--- Delete some last pre-step ~

---

--- <BS> Delete one of the pre-steps. If there is only one kind of pre-steps,

--- remove its latest added one. If not, prompt user to choose pre-step kind

--- by entering single character: `s`plit, `j`ustify, `m`erge.

---

--- Examples:

--- - `tp<BS>` results in only "trim" step to be left.

--- - `it<BS>` prompts to choose which step to delete (pre-split or

--- pre-justify in this case).

---

--- Special configurations for common splits ~

---

--- <=> Use special pattern to align by a group of consecutive "=". It can be

--- preceded by any number of punctuation marks and followed by some sommon

--- punctuation characters. Trim whitespace and merge with single space.

---

--- Before: >

--- a=b

--- aa<=bb

--- aaa===bbb

--- aaaa = cccc

--- <

--- After typing `=`: >

--- a = b

--- aa <= bb

--- aaa === bbb

--- aaaa = cccc

--- <

--- <,> Besides splitting by "," character, trim whitespace, pair neighboring

--- parts and merge with single space.

---

--- Before: >

--- a,b

--- aa,bb

--- aaa , bbb

--- <

--- After typing `,`: >

--- a, b

--- aa, bb

--- aaa, bbb

--- <

--- < > (Space bar) Squash consecutive whitespace into single single space (accept

--- possible indentation) and split by `%s+` pattern (keeps indentation).

---

--- Before: >

--- a b c

--- aa bb cc

--- <

--- After typing `<Space>`: >

--- a b c

--- aa bb cc

---@tag MiniAlign-modifiers-builtin

--- More complex examples to explore functionality

---

--- Copy lines in modifiable buffer, initiate alignment with preview (`gAip`)

--- and try typing suggested key sequences.

--- These are modified examples taken from 'junegunn/vim-easy-align'.

---

--- Equal sign ~

---

--- Lines:

---

--- # This=is=assumed=to be a comment

--- "a ="

--- a =

--- a = 1

--- bbbb = 2

--- ccccccc = 3

--- ccccccccccccccc

--- ddd = 4

--- eeee === eee = eee = eee=f

--- fff = ggg += gg &&= gg

--- g != hhhhhhhh == 888

--- i := 5

--- i %= 5

--- i *= 5

--- j =~ 5

--- j >= 5

--- aa => 123

--- aa <<= 123

--- aa >>= 123

--- bbb => 123

--- c => 1233123

--- d => 123

--- dddddd &&= 123

--- dddddd ||= 123

--- dddddd /= 123

--- gg <=> ee

---

--- Key sequences:

--- - `=`

--- - `=jc`

--- - `=jr`

--- - `=m!<CR>`

--- - `=p`

--- - `=i` (execute `:lua vim.o.commentstring = '# %s'` for full experience)

--- - `=<BS>`

--- - `=<BS>p`

--- - `=fn==1<CR>`

--- - `=<BS>fn==1<CR>t`

--- - `=frow>7<CR>`

---

---@tag MiniAlign-examples

---@alias __align_with_preview boolean|nil Whether to align with live preview.

-- Module definition ==========================================================

local MiniAlign = {}

local H = {}

--- Module setup

---

---@param config table|nil Module config table. See |MiniAlign.config|.

---

---@usage `require('mini.align').setup({})` (replace `{}` with your `config` table)

MiniAlign.setup = function(config)

-- TODO: Remove after Neovim<=0.6 support is dropped

if vim.fn.has('nvim-0.7') == 0 then

vim.notify(

'(mini.align) Neovim<0.7 is soft deprecated (module works but not supported).'

.. ' It will be deprecated after Neovim 0.9.0 release (module will not work).'

.. ' Please update your Neovim version.'

)

end

-- Export module

_G.MiniAlign = MiniAlign

-- Setup config

config = H.setup_config(config)

-- Apply config

H.apply_config(config)

end

--- Module config

---

--- Default values:

---@eval return MiniDoc.afterlines_to_code(MiniDoc.current.eval_section)

---@text # Options ~

---

--- ## Modifiers ~

---

--- `MiniAlign.config.modifiers` is used to define interactive user experience

--- of managing alignment process. It is a table with single character keys and

--- modifier function values.

---

--- Each modifier function:

--- - Is called when corresponding modifier key is pressed.

--- - Has signature `(steps, opts)` and should modify any of its input in place.

---

--- Examples:

--- - Modifier function used for default 'i' modifier:

--- >

--- function(steps, _)

--- table.insert(steps.pre_split, MiniAlign.gen_step.ignore_split())

--- end

--- <

--- - Tweak 't' modifier to use highest indentation instead of keeping it:

--- >

--- require('mini.align').setup({

--- t = function(steps, _)

--- table.insert(steps.pre_justify, MiniAlign.gen_step.trim('both', 'high'))

--- end

--- })

--- <

--- - Tweak `j` modifier to cycle through available "justify_side" option

--- values (like in 'junegunn/vim-easy-align'):

--- >

--- require('mini.align').setup({

--- modifiers = {

--- j = function(_, opts)

--- local next_option = ({

--- left = 'center', center = 'right', right = 'none', none = 'left',

--- })[opts.justify_side]

--- opts.justify_side = next_option or 'left'

--- end,

--- },

--- })

--- <

--- ## Options ~

---

--- `MiniAlign.config.options` defines default values of options used to control

--- behavior of steps.

---

--- Examples:

--- - Set `justify_side = 'center'` to center align at initialization.

---

--- For more details about options see |MiniAlign.align_strings()| and entries of

--- |MiniAlign.gen_step| for default main steps.

---

--- ## Steps ~

---

--- `MiniAlign.config.steps` defines default steps to be applied during

--- alignment process.

---

--- Examples:

--- - Align by default only first pair of columns:

--- >

--- local align = require('mini.align')

--- align.setup({

--- steps = {

--- pre_justify = { align.gen_step.filter('n == 1') }

--- },

--- })

MiniAlign.config = {

-- Module mappings. Use `''` (empty string) to disable one.

mappings = {

start = 'ga',

start_with_preview = 'gA',

},

-- Modifiers changing alignment steps and/or options

modifiers = {

-- Main option modifiers

--minidoc_replace_start ['s'] = --<function: enter split pattern>,

['s'] = function(_, opts)

local input = H.user_input('Enter split Lua pattern')

if input == nil then return end

opts.split_pattern = input

end,

--minidoc_replace_end

--minidoc_replace_start ['j'] = --<function: choose justify side>,

['j'] = function(_, opts)

-- stylua: ignore

H.echo({

{ 'Select justify: ', 'ModeMsg' }, { 'l', 'Question' }, { 'eft, ' },

{ 'c', 'Question' }, { 'enter, ' }, { 'r', 'Question' }, { 'ight, ' },

{ 'n', 'Question' }, { 'one' }

})

local ok, char = pcall(vim.fn.getcharstr)

if not ok or char == '\27' then return end

local direction = ({ l = 'left', c = 'center', r = 'right', n = 'none' })[char]

if direction == nil then return end

opts.justify_side = direction

end,

--minidoc_replace_end

--minidoc_replace_start ['m'] = --<function: enter merge delimiter>,

['m'] = function(_, opts)

local input = H.user_input('Enter merge delimiter')

if input == nil then return end

opts.merge_delimiter = input

end,

--minidoc_replace_end

-- Modifiers adding pre-steps

--minidoc_replace_start ['f'] = --<function: filter parts by entering Lua expression>,

['f'] = function(steps, _)

local input = H.user_input('Enter filter expression')

local step = MiniAlign.gen_step.filter(input)

if step == nil then return end

table.insert(steps.pre_justify, step)

end,

--minidoc_replace_end

--minidoc_replace_start ['i'] = --<function: ignore some split matches>,

['i'] = function(steps, _) table.insert(steps.pre_split, MiniAlign.gen_step.ignore_split()) end,

--minidoc_replace_end

--minidoc_replace_start ['p'] = --<function: pair parts>,

['p'] = function(steps, _) table.insert(steps.pre_justify, MiniAlign.gen_step.pair()) end,

--minidoc_replace_end

--minidoc_replace_start ['t'] = --<function: trim parts>,

['t'] = function(steps, _) table.insert(steps.pre_justify, MiniAlign.gen_step.trim()) end,

--minidoc_replace_end

-- Delete some last pre-step

--minidoc_replace_start ['<BS>'] = --<function: delete some last pre-step>,

[vim.api.nvim_replace_termcodes('<BS>', true, true, true)] = function(steps, _)

local has_pre = {}

for _, pre in ipairs({ 'pre_split', 'pre_justify', 'pre_merge' }) do

if #steps[pre] > 0 then table.insert(has_pre, pre) end

end

if #has_pre == 0 then return end

if #has_pre == 1 then

local pre = steps[has_pre[1]]

table.remove(pre, #pre)

return

end

--stylua: ignore

H.echo({

{ 'Select pre-step to remove: ', 'ModeMsg' }, { 's', 'Question' }, { 'plit, ' },

{ 'j', 'Question' }, { 'ustify, ' }, { 'm', 'Question' }, { 'erge' },

})

local ok, char = pcall(vim.fn.getcharstr)

if not ok or char == '\27' then return end

if char == 's' then table.remove(steps.pre_split, #steps.pre_split) end

if char == 'j' then table.remove(steps.pre_justify, #steps.pre_justify) end

if char == 'm' then table.remove(steps.pre_merge, #steps.pre_merge) end

end,

--minidoc_replace_end

-- Special configurations for common splits

--minidoc_replace_start ['='] = --<function: enhanced setup for '='>,

['='] = function(steps, opts)

opts.split_pattern = '%p*=+[<>~]*'

table.insert(steps.pre_justify, MiniAlign.gen_step.trim())

opts.merge_delimiter = ' '

end,

--minidoc_replace_end

--minidoc_replace_start [','] = --<function: enhanced setup for ','>,

[','] = function(steps, opts)

opts.split_pattern = ','

table.insert(steps.pre_justify, MiniAlign.gen_step.trim())

table.insert(steps.pre_justify, MiniAlign.gen_step.pair())

opts.merge_delimiter = ' '

end,

--minidoc_replace_end

--minidoc_replace_start [' '] = --<function: enhanced setup for ' '>,

[' '] = function(steps, opts)

table.insert(

steps.pre_split,

MiniAlign.new_step('squash', function(strings)

-- Replace all space sequences with single space (except indent)

for i, s in ipairs(strings) do

strings[i] = s:gsub('()(%s+)', function(n, space) return n == 1 and space or ' ' end)

end

end)

)

-- Don't use `' '` to respect indent

opts.split_pattern = '%s+'

end,

--minidoc_replace_end

},

-- Default options controlling alignment process

options = {

split_pattern = '',

justify_side = 'left',

merge_delimiter = '',

},

-- Default steps performing alignment (if `nil`, default is used)

steps = {

pre_split = {},

split = nil,

pre_justify = {},

justify = nil,

pre_merge = {},

merge = nil,

},

-- Whether to disable showing non-error feedback

silent = false,

}

--minidoc_afterlines_end

-- Module functionality =======================================================

--- Align strings

---

--- For details about alignment process see |MiniAlign-algorithm|.

---

---@param strings table Array of strings.

---@param opts table|nil Options. Its copy will be passed to steps as second

--- argument. Extended with `MiniAlign.config.options`.

--- This is a place to control default main steps:

--- - `opts.split_pattern` - Lua pattern(s) used to make split parts.

--- - `opts.split_exclude_patterns` - which split matches should be ignored.

--- - `opts.justify_side` - which direction(s) alignment should be done.

--- - `opts.justify_offsets` - offsets tweaking width of first column

--- - `opts.merge_delimiter` - which delimiter(s) to use when merging.

--- For more information see |MiniAlign.gen_step| entry for corresponding

--- default step.

---@param steps table|nil Steps. Extended with `MiniAlign.config.steps`.

--- Possible `nil` values are replaced with corresponding default steps:

--- - `split` - |MiniAlign.gen_step.default_split()|.

--- - `justify` - |MiniAlign.gen_step.default_justify()|.

--- - `merge` - |MiniAlign.gen_step.default_merge()|.

MiniAlign.align_strings = function(strings, opts, steps)

-- Validate arguments

if not H.is_array_of(strings, H.is_string) then

H.error('First argument of `MiniAlign.align_strings()` should be array of strings.')

end

opts = H.normalize_opts(opts)

steps = H.normalize_steps(steps, 'steps')

-- Make a copy so that modification in place doesn't affect input

strings = vim.deepcopy(strings)

-- Pre split

for _, step in ipairs(steps.pre_split) do

H.apply_step(step, strings, opts, 'pre_split')

end

-- Split

local parts = H.apply_step(steps.split, strings, opts, 'split')

if not H.is_parts(parts) then

if H.can_be_parts(parts) then

parts = MiniAlign.as_parts(parts)

else

H.error('Output of `split` step should be convertable to parts. See `:h MiniAlign.as_parts()`.')

end

end

-- Pre justify

for _, step in ipairs(steps.pre_justify) do

H.apply_step(step, parts, opts, 'pre_justify')

end

-- Justify

H.apply_step(steps.justify, parts, opts, 'justify')

-- Pre merge

for _, step in ipairs(steps.pre_merge) do

H.apply_step(step, parts, opts, 'pre_merge')

end

-- Merge

local new_strings = H.apply_step(steps.merge, parts, opts, 'merge')

if not H.is_array_of(new_strings, H.is_string) then H.error('Output of `merge` step should be array of strings.') end

return new_strings

end

--- Align current region with user-supplied steps

---

--- Mostly designed to be used inside mappings.

---

--- Will use |MiniAlign.align_strings()| and set the following options in `opts`:

--- - `justify_offsets` - array of offsets used to achieve actual alignment of

--- a region. It is non-trivial (not array of zeros) only for charwise

--- selection: offset of first string is computed as width of prefix to the

--- left of region start.

--- - `region` - current affected region (see |MiniAlign-glossary|). Can be

--- used to create more advanced steps.

--- - `mode` - mode of selection (see |MiniAlign-glossary|).

---

---@param mode string Selection mode. One of "char", "line", "block".

MiniAlign.align_user = function(mode)

local modifiers = H.get_config().modifiers

local with_preview = H.cache.with_preview

local opts = H.cache.opts or H.normalize_opts()

local steps = H.cache.steps or H.normalize_steps()

local steps_are_from_cache = H.cache.steps ~= nil

H.cache.region = nil

-- Track if lines were actually set to properly undo during preview

local lines_were_set = false

-- Make initial process

lines_were_set = H.process_current_region(lines_were_set, mode, opts, steps)

-- Make early return:

-- - If cache is present (enables dot-repeat).

-- - If `split` is not default with no preview (no more information needed).

if steps_are_from_cache or (not with_preview and opts.split_pattern ~= '') then return end

-- Ask user to input modifier id until no more is needed

local n_iter = 0

while true do

-- Get modifier from user

local id = H.user_modifier(with_preview, H.make_status_msg_chunks(opts, steps))

n_iter = n_iter + 1

-- Stop in case user supplied inappropriate modifer id (abort)

-- Also stop in case of too many iterations (guard from infinite cycle)

if id == nil or n_iter > 1000 then

if lines_were_set then H.undo() end

if n_iter > 1000 then H.echo({ { 'Too many modifiers typed.', 'WarningMsg' } }, true) end

break

end

-- Stop preview after `<CR>` (confirmation)

if with_preview and id == '\r' then break end

-- Apply modifier

local mod = modifiers[id]

if mod == nil then

-- Use supplied identifier as split pattern

opts.split_pattern = vim.pesc(id)

else

-- Modifier should change input `steps` table in place

local ok, out = pcall(mod, steps, opts)

if not ok then

-- Force message to appear for 500ms because it might be overridden by

-- helper status message

local msg = string.format('Modifier %s should be properly callable. Reason: %s', vim.inspect(id), out)

H.echo({ { msg, 'WarningMsg' } }, true)

vim.cmd('redraw')

vim.loop.sleep(500)

end

end

-- Normalize steps and options while validating their correctness

opts = H.normalize_opts(opts)

steps = H.normalize_steps(steps, opts)

-- Process region while tracking if lines were set at least once

local lines_now_set = H.process_current_region(lines_were_set, mode, opts, steps)

lines_were_set = lines_were_set or lines_now_set

-- Stop in "no preview" mode right after `split` is defined

if not with_preview and opts.split_pattern ~= '' then break end

end

-- Remove helper status message (if shown)

H.unecho()

end

--- Perfrom action in Normal mode

---

--- Used in Normal mode mapping. No need to use it directly.

---

---@param with_preview __align_with_preview

MiniAlign.action_normal = function(with_preview)

if H.is_disabled() then return end

H.cache = { with_preview = with_preview }

-- Set 'operatorfunc' which will be later called with appropriate marks set

vim.cmd('set operatorfunc=v:lua.MiniAlign.align_user')

return 'g@'

end

--- Perfrom action in Visual mode

---

--- Used in Visual mode mapping. No need to use it directly.

---

---@param with_preview __align_with_preview

MiniAlign.action_visual = function(with_preview)

if H.is_disabled() then return end

H.cache = { with_preview = with_preview }

-- Perform action and exit Visual mode

local mode = ({ ['v'] = 'char', ['V'] = 'line', ['\22'] = 'block' })[vim.fn.mode(1)]

MiniAlign.align_user(mode)

vim.cmd('normal! \27')

end

--- Convert 2d array of strings to parts

---

--- This function verifies if input is a proper 2d array of strings and adds

--- methods to its copy.

---

---@class parts

---

---@field apply function Takes callable `f` and applies it to every part.

--- Callable should have signature `(s, data)`: `s` is a string part,

--- `data` - table with its data (<row> has row number, <col> has column number).

--- Returns new 2d array.

---

---@field apply_inplace function Takes callable `f` and applies it to every part.

--- Should have same signature as in `apply` method. Outputs (should all be

--- strings) are assigned in place to a corresponding parts element. Returns

--- parts itself to enable method chaining.

---

---@field get_dims function Return dimensions of parts array: a table with

--- <row> and <col> keys having number of rows and number of columns (maximum

--- number of elements across all rows).

---

---@field group function Concatenate neighboring strings based on supplied

--- boolean mask and direction (one of "left", default, or "right"). Has

--- signature `(mask, direction)` and modifies parts in place. Returns parts

--- itself to enable method chaining.

--- Example:

--- - Parts: { { "a", "b", "c" }, { "d", "e" }, { "f" } }

--- - Mask: { { false, false, true }, { true, false }, { false } }

--- - Result for direction "left": { { "abc" }, { "d", "e" }, { "f" } }

--- - Result for direction "right": { { "ab","c" }, { "de" }, { "f" } }

---

---@field pair function Concatenate neighboring element pairs. Takes

--- `direction` as input (one of "left", default, or "right") and applies

--- `group()` for an alternating mask.

--- Example:

--- - Parts: { { "a", "b", "c" }, { "d", "e" }, { "f" } }

--- - Result for direction "left": { { "ab", "c" }, { "de" }, { "f" } }

--- - Result for direction "right": { { "a", "bc" }, { "de" }, { "f" } }

---

---@field slice_col function Return column with input index `j`. Note: it might

--- not be an array if rows have unequal number of columns.

---

---@field slice_row function Return row with input index `i`.

---

---@field trim function Trim elements whitespace. Has signature `(direction, indent)`

--- and modifies parts in place. Returns parts itself to enable method chaining.

--- - Possible values of `direction`: "both" (default), "left", "right",

--- "none". Defines from which side whitespaces should be removed.

--- - Possible values of `indent`: "keep" (default), "low", "high", "remove".

--- Defines what to do with possible indent (left whitespace of first string

--- in a row). Value "keep" keeps it; "low" makes all indent equal to the

--- lowest across rows; "high" - highest across rows; "remove" - removes indent.

---

---@usage >

--- parts = MiniAlign.as_parts({ { 'a', 'b' }, { 'c' } })

--- print(vim.inspect(parts.get_dims())) -- Should be { row = 2, col = 2 }

---

--- parts.apply_inplace(function(s, data)

--- return ' ' .. data.row .. s .. data.col .. ' '

--- end)

--- print(vim.inspect(parts)) -- Should be { { ' 1a1 ', ' 1b2 ' }, { ' 2c1 ' } }

---

--- parts.trim('both', 'remove').pair()

--- print(vim.inspect(parts)) -- Should be { { '1a11b2' }, { '2c1' } }

MiniAlign.as_parts = function(arr2d)

local ok, msg = H.can_be_parts(arr2d)

if not ok then H.error('Input of `as_parts()` ' .. msg) end

local parts = vim.deepcopy(arr2d)

local methods = {}

methods.apply = function(f)

local res = {}

for i, row in ipairs(parts) do

res[i] = {}

for j, s in ipairs(row) do

res[i][j] = f(s, { row = i, col = j })

end

end

return res

end

methods.apply_inplace = function(f)

for i, row in ipairs(parts) do

for j, s in ipairs(row) do

local new_val = f(s, { row = i, col = j })

if type(new_val) ~= 'string' then H.error('Input of `apply_inplace()` method should always return string.') end

parts[i][j] = new_val

end

end

return parts

end

methods.get_dims = function()

local n_cols = 0

for _, row in ipairs(parts) do

n_cols = math.max(n_cols, #row)

end

return { row = #parts, col = n_cols }

end

-- Group cells into single string based on boolean mask.

-- Can be used for filtering separators and sticking separator to its part.

methods.group = function(mask, direction)

direction = direction or 'left'

for i, row in ipairs(parts) do

local group_tables = H.group_by_mask(row, mask[i], direction)

parts[i] = vim.tbl_map(table.concat, group_tables)

end

return parts

end

methods.pair = function(direction)

direction = direction or 'left'

local mask = {}

for i, row in ipairs(parts) do

mask[i] = {}

for j, _ in ipairs(row) do

-- Count from corresponding end

local num = direction == 'left' and j or (#row - j + 1)

mask[i][j] = num % 2 == 0

end

end

parts.group(mask, direction)

return parts

end

-- NOTE: output might not be an array (some rows can not have input column)

-- Use `vim.tbl_keys()` and `vim.tbl_values()`

methods.slice_col = function(j)

return vim.tbl_map(function(row) return row[j] end, parts)

end

methods.slice_row = function(i) return parts[i] or {} end

methods.trim = function(direction, indent)

direction = direction or 'both'

indent = indent or 'keep'

-- Verify arguments

local trim_fun = H.trim_functions[direction]

if not vim.is_callable(trim_fun) then

local allowed = vim.tbl_map(vim.inspect, vim.tbl_keys(H.trim_functions))

table.sort(allowed)

H.error('`direction` should be one of ' .. table.concat(allowed, ', ') .. '.')

end

local indent_fun = H.indent_functions[indent]

if not vim.is_callable(indent_fun) then

local allowed = vim.tbl_map(vim.inspect, vim.tbl_keys(H.indent_functions))

table.sort(allowed)

H.error('`indent` should be one of ' .. table.concat(allowed, ', ') .. '.')

end

-- Compute indentation to restore later

local row_indent = vim.tbl_map(function(row) return row[1]:match('^(%s*)') end, parts)

row_indent = indent_fun(row_indent)

-- Trim

parts.apply_inplace(trim_fun)

-- Restore indentation if it was removed

if vim.tbl_contains({ 'both', 'left' }, direction) then