==============================================================================

------------------------------------------------------------------------------

*mini.nvim*

*mini.txt* Collection of minimal, independent and fast Lua modules

Author: Evgeni Chasnovski

License: MIT

|mini.nvim| is a collection of minimal, independent, and fast Lua modules

dedicated to improve Neovim (version 0.5 and higher) experience. Each

module can be considered as a separate sub-plugin.

Table of contents:

General overview.................................................|mini.nvim|

Plugin colorscheme..............................................|minischeme|

Base16 colorscheme creation....................................|mini.base16|

Remove buffers..............................................|mini.bufremove|

Comment.......................................................|mini.comment|

Completion and signature help..............................|mini.completion|

Highlight word under cursor................................|mini.cursorword|

Generate help files...............................................|mini.doc|

Fuzzy matching..................................................|mini.fuzzy|

Visualize and operate on indent scope.....................|mini.indentscope|

Jump cursor to a single character................................|mini.jump|

Jump within visible lines......................................|mini.jump2d|

Miscellaneous functions..........................................|mini.misc|

Autopairs.......................................................|mini.pairs|

Session management...........................................|mini.sessions|

Start screen..................................................|mini.starter|

Statusline.................................................|mini.statusline|

Surround.....................................................|mini.surround|

Tabline.......................................................|mini.tabline|

Trailspace (highlight and remove)..........................|mini.trailspace|

# General principles~

- <Design>. Each module is designed to solve a particular problem targeting

balance between feature-richness (handling as many edge-cases as

possible) and simplicity of implementation/support. Granted, not all of

them ended up with the same balance, but it is the goal nevertheless.

- <Independence>. Modules are independent of each other and can be run

without external dependencies. Although some of them may need

dependencies for full experience.

- <Structure>. Each module is a submodule for a placeholder "mini" module. So,

for example, "surround" module should be referred to as "mini.surround".

As later will be explained, this plugin can also be referred to

as "MiniSurround".

- <Setup>:

- Each module (if needed) should be setup separately with

`require(<name of module>).setup({})`

(possibly replace {} with your config table or omit to use defaults).

You can supply only values which differ from defaults, which will be

used for the rest ones.

- Call to module's `setup()` always creates a global Lua object with

coherent camel-case name: `require('mini.surround').setup()` creates

`_G.MiniSurround`. This allows for a simpler usage of plugin

functionality: instead of `require('mini.surround')` use

`MiniSurround` (or manually `:lua MiniSurround.*` in command line);

available from `v:lua` like `v:lua.MiniSurround`. Considering this,

"module" and "Lua object" names can be used interchangeably:

'mini.surround' and 'MiniSurround' will mean the same thing.

- Each supplied `config` table (after extending with default values) is

stored in `config` field of global object. Like `MiniSurround.config`.

- Values of `config`, which affect runtime activity, can be changed on

the fly to have effect. For example, `MiniSurround.config.n_lines`

can be changed during runtime; but changing

`MiniSurround.config.mappings` won't have any effect (as mappings are

created once during `setup()`).

- <Disabling>. Each module's core functionality can be disabled globally or

buffer-locally by creating appropriate global or buffer-scoped variables

equal to |v:true|. See |mini.nvim-disabling-recipes| for common recipes.

- <Highlight groups>. Appearance of module's output is controlled by

certain highlight group (see |highlight-groups|). To customize them, use

|highlight| command. Note: currently not many Neovim themes support this

plugin's highlight groups; fixing this situation is highly appreciated.

To see a more calibrated look, use |MiniBase16| or plugin's colorscheme

`minischeme`.

- <Stability>. Each module upon release is considered to be relatively

stable: both in terms of setup and functionality. Any

non-bugfix backward-incompatible change will be released gradually as

much as possible.

# List of modules~

- |MiniBase16| - fast implementation of base16 theme for manually supplied

palette. Has unique palette generator which needs only background and

foreground colors.

- |MiniBufremove| - buffer removing (unshow, delete, wipeout) while saving

window layout.

- |MiniComment| - fast and familiar per-line code commenting.

- |MiniCompletion| - async (with customizable 'debounce' delay) 'two-stage

chain completion': first builtin LSP, then configurable fallback. Also

has functionality for completion item info and function signature (both

in floating window appearing after customizable delay).

- |MiniCursorword| - automatic highlighting of word under cursor (displayed

after customizable delay). Current word under cursor can be highlighted

differently.

- |MiniDoc| - generation of help files from EmmyLua-like annotations.

Allows flexible customization of output via hook functions. Used for

documenting this plugin.

- |MiniFuzzy| - functions for fast and simple fuzzy matching. It has

not only functions to perform fuzzy matching of one string to others, but

also a sorter for |telescope.nvim|.

- |MiniIndentscope| - Visualize and operate on indent scope. Supports

customization of debounce delay, animation style, and different

granularity of options for scope computing algorithm.

- |MiniJump| - minimal and fast module for smarter jumping to a single

character.

- |MiniJump2d| - minimal and fast Lua plugin for jumping (moving cursor)

within visible lines via iterative label filtering. Supports custom jump

targets (spots), labels, hooks, allowed windows and lines, and more.

- |MiniMisc| - collection of miscellaneous useful functions. Like `put()`

and `put_text()` which print Lua objects to command line and current

buffer respectively.

- |MiniPairs| - autopairs plugin which has minimal defaults and

functionality to do per-key expression mappings.

- |MiniSessions| - session management (read, write, delete) which works

using |mksession|. Implements both global (from configured directory) and

local (from current directory) sessions.

- |MiniStarter| - minimal, fast, and flexible start screen. Displayed items

are fully customizable both in terms of what they do and how they look

(with reasonable defaults). Item selection can be done using prefix query

with instant visual feedback.

- |MiniStatusline| - minimal and fast statusline. Has ability to use custom

content supplied with concise function (using module's provided section

functions) along with builtin default. For full experience needs [Nerd

font](https://www.nerdfonts.com/),

[gitsigns.nvim](https://github.com/lewis6991/gitsigns.nvim) plugin, and

[nvim-web-devicons](https://github.com/kyazdani42/nvim-web-devicons)

plugin (but works without any them).

- |MiniSurround| - fast surround plugin. Add, delete, replace, find,

highlight surrounding (like pair of parenthesis, quotes, etc.). Has

special "function call", "tag", and "interactive" surroundings. Supports

dot-repeatability, textobject, motions.

- |MiniTabline| - minimal tabline which always shows listed (see 'buflisted')

buffers. Allows showing extra information section in case of multiple vim

tabpages. For full experience needs

[nvim-web-devicons](https://github.com/kyazdani42/nvim-web-devicons).

- |MiniTrailspace| - automatic highlighting of trailing whitespace with

functionality to remove it.

------------------------------------------------------------------------------

*mini.nvim-disabling-recipes*

Common recipes for disabling functionality

Each module's core functionality can be disabled globally or buffer-locally

by creating appropriate global or buffer-scoped variables equal to

|v:true|. Functionality is disabled if at least one of `g:` or `b:`

variables is equal to `v:true`.

Variable names have the same structure: `{g,b}:mini*_disable` where `*` is

module's lowercase name. For example, `g:minicursorword_disable` disables

|mini.cursorword| globally and `b:minicursorword_disable` - for

corresponding buffer. Note: in this section disabling 'mini.cursorword' is

used as example; everything holds for other module variables.

Considering high number of different scenarios and customization intentions,

writing exact rules for disabling module's functionality is left to user.

# Manual disabling~

- Disable globally:

Lua - `:lua vim.g.minicursorword_disable=true`

Vimscript - `:let g:minicursorword_disable=v:true`

- Disable for current buffer:

Lua - `:lua vim.b.minicursorword_disable=true`

Vimscript - `:let b:minicursorword_disable=v:true`

- Toggle (disable if enabled, enable if disabled):

Globally - `:lua vim.g.minicursorword_disable = not vim.g.minicursorword_disable`

For buffer - `:lua vim.b.minicursorword_disable = not vim.b.minicursorword_disable`

# Automated disabling~

- Disable for a certain |filetype| (for example, "markdown"):

`autocmd Filetype markdown lua vim.b.minicursorword_disable = true`

- Enable only for certain filetypes (for example, "lua" and "python"):

`au FileType * if index(['lua', 'python'], &ft) < 0 | let b:minicursorword_disable=v:true | endif`

- Disable in Insert mode (use similar pattern for Terminal mode or indeed

any other mode change with |ModeChanged| starting from Neovim 0.7.0):

`au InsertEnter * lua vim.b.minicursorword_disable = true`

`au InsertLeave * lua vim.b.minicursorword_disable = false`

- Disable in Terminal buffer:

`au TermOpen * lua vim.b.minicursorword_disable = true`

------------------------------------------------------------------------------

*minischeme*

# Plugin colorscheme~

This plugin comes with an official colorscheme named `minischeme`. This is

a |MiniBase16| theme created with faster version of the following Lua code: >

require('mini.base16').setup({

palette = palette, name = 'minischeme', use_cterm = true

})

where `palette` is:

- For dark 'background':

`require('mini.base16').mini_palette('#112641', '#e2e98f', 75)`

- For light 'background':

`require('mini.base16').mini_palette('#e2e5ca', '#002a83', 75)`

Activate it as a regular |colorscheme|.

==============================================================================

------------------------------------------------------------------------------

*mini.base16*

*MiniBase16*

Minimal and fast Lua module which implements

[base16](http://chriskempson.com/projects/base16/) color scheme (with

Copyright (C) 2012 Chris Kempson) adapated for modern Neovim 0.5 Lua

plugins. Extra features:

- Configurable automatic support of cterm colors (see |highlight-cterm|).

- Opinionated palette generator based only on background and foreground

colors.

# Setup~

This module needs a setup with `require('mini.base16').setup({})` (replace

`{}` with your `config` table). It will create global Lua table

`MiniBase16` which you can use for scripting or manually (with

`:lua MiniBase16.*`).

See |MiniBase16.config| for `config` structure and default values.

Example:

>

require('mini.base16').setup({

palette = {

base00 = '#112641',

base01 = '#3a475e',

base02 = '#606b81',

base03 = '#8691a7',

base04 = '#d5dc81',

base05 = '#e2e98f',

base06 = '#eff69c',

base07 = '#fcffaa',

base08 = '#ffcfa0',

base09 = '#cc7e46',

base0A = '#46a436',

base0B = '#9ff895',

base0C = '#ca6ecf',

base0D = '#42f7ff',

base0E = '#ffc4ff',

base0F = '#00a5c5',

},

use_cterm = true,

})

<

# Notes~

1. This module is used to create plugin's colorscheme (see |minischeme|).

2. Using `setup()` doesn't actually create a |colorscheme|. It basically

creates a coordinated set of |highlight|s. To create your own theme:

- Put "myscheme.lua" file (name after your chosen theme name) inside

any "colors" directory reachable from 'runtimepath' ("colors" inside

your Neovim config directory is usually enough).

- Inside "myscheme.lua" call `require('mini.base16').setup()` with your

palette and only after that set |g:colors_name| to "myscheme".

------------------------------------------------------------------------------

*MiniBase16.setup()*

`MiniBase16.setup`({config})

Module setup

Setup is done by applying base16 palette to enable colorscheme. Highlight

groups make an extended set from original

[base16-vim](https://github.com/chriskempson/base16-vim/) plugin. It is a

good idea to have `config.palette` respect the original [styling

principles](https://github.com/chriskempson/base16/blob/master/styling.md).

By default only 'gui highlighting' (see |highlight-gui| and

|termguicolors|) is supported. To support 'cterm highlighting' (see

|highlight-cterm|) supply `config.use_cterm` argument in one of the formats:

- `true` to auto-generate from `palette` (as closest colors).

- Table with similar structure to `palette` but having terminal colors

(integers from 0 to 255) instead of hex strings.

Parameters~

{config} `(table)` Module config table. See |MiniBase16.config|.

Usage~

`require('mini.base16').setup({})` (replace `{}` with your `config`

table; `config.palette` should be a table with colors)

------------------------------------------------------------------------------

*MiniBase16.config*

`MiniBase16.config`

Module config

Default values:

>

MiniBase16.config = {

-- Table with names from `base00` to `base0F` and values being strings of

-- HEX colors with format "#RRGGBB". NOTE: this should be explicitly

-- supplied in `setup()`.

palette = nil,

-- Whether to support cterm colors. Can be boolean, `nil` (same as

-- `false`), or table with cterm colors. See `setup()` documentation for

-- more information.

use_cterm = nil,

}

<

------------------------------------------------------------------------------

*MiniBase16.mini_palette()*

`MiniBase16.mini_palette`({background}, {foreground}, {accent_chroma})

Create 'mini' palette

Create base16 palette based on the HEX (string '#RRGGBB') colors of main

background and foreground with optional setting of accent chroma (see

details).

# Algorithm design~

- Main operating color space is

[CIELCh(uv)](https://en.wikipedia.org/wiki/CIELUV#Cylindrical_representation_(CIELCh))

which is a cylindrical representation of a perceptually uniform CIELUV

color space. It defines color by three values: lightness L (values from 0

to 100), chroma (positive values), and hue (circular values from 0 to 360

degress). Useful converting tool: https://www.easyrgb.com/en/convert.php

- There are four important lightness values: background, foreground, focus

(around the middle of background and foreground, leaning towards

foreground), and edge (extreme lightness closest to foreground).

- First four colors have the same chroma and hue as `background` but

lightness progresses from background towards focus.

- Second four colors have the same chroma and hue as `foreground` but

lightness progresses from foreground towards edge in such a way that

'base05' color is main foreground color.

- The rest eight colors are accent colors which are created in pairs

- Each pair has same hue from set of hues 'most different' to

background and foreground hues (if respective chorma is positive).

- All colors have the same chroma equal to `accent_chroma` (if not

provided, chroma of foreground is used, as they will appear next

to each other). Note: this means that in case of low foreground

chroma, it is a good idea to set `accent_chroma` manually.

Values from 30 (low chorma) to 80 (high chroma) are common.

- Within pair there is base lightness (equal to foreground

lightness) and alternative (equal to focus lightness). Base

lightness goes to colors which will be used more frequently in

code: base08 (variables), base0B (strings), base0D (functions),

base0E (keywords).

How exactly accent colors are mapped to base16 palette is a result of

trial and error. One rule of thumb was: colors within one hue pair should

be more often seen next to each other. This is because it is easier to

distinguish them and seems to be more visually appealing. That is why

`base0D` and `base0F` have same hues because they usually represent

functions and delimiter (brackets included).

Parameters~

{background} `(string)` Background HEX color (formatted as `#RRGGBB`).

{foreground} `(string)` Foreground HEX color (formatted as `#RRGGBB`).

{accent_chroma} `(number)` Optional positive number (usually between 0

and 100). Default: chroma of foreground color.

Return~

`(table)` Table with base16 palette.

Usage~

`local palette = require('mini.base16').mini_palette('#112641', '#e2e98f', 75)`

`require('mini.base16').setup({palette = palette})`

------------------------------------------------------------------------------

*MiniBase16.rgb_palette_to_cterm_palette()*

`MiniBase16.rgb_palette_to_cterm_palette`({palette})

Converts palette with RGB colors to terminal colors

Useful for caching `use_cterm` variable to increase speed.

Parameters~

{palette} `(table)` Table with base16 palette (same as in

`MiniBase16.config.palette`).

Return~

`(table)` Table with base16 palette using |highlight-cterm|.

==============================================================================

------------------------------------------------------------------------------

*mini.bufremove*

*MiniBufremove*

Lua module for minimal buffer removing (unshow, delete, wipeout), which

saves window layout (opposite to builtin Neovim's commands). This is mostly

a Lua implementation of

[bclose.vim](https://vim.fandom.com/wiki/Deleting_a_buffer_without_closing_the_window).

Other alternatives:

- [vim-bbye](https://github.com/moll/vim-bbye)

- [vim-sayonara](https://github.com/mhinz/vim-sayonara)

# Setup~

This module doesn't need setup, but it can be done to improve usability.

Setup with `require('mini.bufremove').setup({})` (replace `{}` with your

`config` table). It will create global Lua table `MiniBufremove` which you

can use for scripting or manually (with `:lua MiniBufremove.*`).

See |MiniBufremove.config| for `config` structure and default values.

# Notes~

1. Which buffer to show in window(s) after its current buffer is removed is

decided by the algorithm:

- If alternate buffer (see |CTRL-^|) is listed (see |buflisted()|), use it.

- If previous listed buffer (see |bprevious|) is different, use it.

- Otherwise create a scratch one with `nvim_create_buf(true, true)` and use

it.

# Disabling~

To disable core functionality, set `g:minibufremove_disable` (globally) or

`b:minibufremove_disable` (for a buffer) to `v:true`. Considering high

number of different scenarios and customization intentions, writing exact

rules for disabling module's functionality is left to user. See

|mini.nvim-disabling-recipes| for common recipes.

------------------------------------------------------------------------------

*MiniBufremove.setup()*

`MiniBufremove.setup`({config})

Module setup

Parameters~

{config} `(table)` Module config table. See |MiniBufremove.config|.

Usage~

`require('mini.bufremove').setup({})` (replace `{}` with your `config` table)

------------------------------------------------------------------------------

*MiniBufremove.config*

`MiniBufremove.config`

Module config

Default values:

>

MiniBufremove.config = {

-- Whether to set Vim's settings for buffers (allow hidden buffers)

set_vim_settings = true,

}

<

------------------------------------------------------------------------------

*MiniBufremove.delete()*

`MiniBufremove.delete`({buf_id}, {force})

Delete buffer `buf_id` with |:bdelete| after unshowing it

Parameters~

{buf_id} `(number)` Buffer identifier (see |bufnr()|) to use. Default:

0 for current.

{force} `(boolean)` Whether to ignore unsaved changes (using `!` version of

command). Default: `false`.

Return~

`(boolean)` Whether operation was successful.

------------------------------------------------------------------------------

*MiniBufremove.wipeout()*

`MiniBufremove.wipeout`({buf_id}, {force})

Wipeout buffer `buf_id` with |:bwipeout| after unshowing it

Parameters~

{buf_id} `(number)` Buffer identifier (see |bufnr()|) to use. Default:

0 for current.

{force} `(boolean)` Whether to ignore unsaved changes (using `!` version of

command). Default: `false`.

Return~

`(boolean)` Whether operation was successful.

------------------------------------------------------------------------------

*MiniBufremove.unshow()*

`MiniBufremove.unshow`({buf_id})

Stop showing buffer `buf_id` in all windows

Parameters~

{buf_id} `(number)` Buffer identifier (see |bufnr()|) to use. Default:

0 for current.

Return~

`(boolean)` Whether operation was successful.

------------------------------------------------------------------------------

*MiniBufremove.unshow_in_window()*

`MiniBufremove.unshow_in_window`({win_id})

Stop showing current buffer of window `win_id`

Parameters~

{win_id} `(number)` Window identifier (see |win_getid()|) to use.

Default: 0 for current.

Return~

`(boolean)` Whether operation was successful.

==============================================================================

------------------------------------------------------------------------------

*mini.comment*

*MiniComment*

Minimal and fast Lua module for code commenting. This is basically a

reimplementation of "tpope/vim-commentary". Commenting in Normal mode

respects |count| and is dot-repeatable. Comment structure is inferred

from 'commentstring'. Handles both tab and space indenting (but not when

they are mixed). Allows custom hooks before and after successful commeting.

What it doesn't do:

- Block and sub-line comments. This will only support per-line commenting.

- Configurable (from module) comment structure. Modify |commentstring|

instead. To enhance support for commenting in multi-language files, see

"JoosepAlviste/nvim-ts-context-commentstring" plugin along with `hooks`

option of this module (see |MiniComment.config|).

- Handle indentation with mixed tab and space.

- Preserve trailing whitespace in empty lines.

# Setup~

This module needs a setup with `require('mini.comment').setup({})` (replace

`{}` with your `config` table). It will create global Lua table

`MiniComment` which you can use for scripting or manually (with

`:lua MiniComment.*`).

See |MiniComment.config| for `config` structure and default values.

# Disabling~

To disable core functionality, set `g:minicomment_disable` (globally) or

`b:minicomment_disable` (for a buffer) to `v:true`. Considering high number

of different scenarios and customization intentions, writing exact rules

for disabling module's functionality is left to user. See

|mini.nvim-disabling-recipes| for common recipes.

------------------------------------------------------------------------------

*MiniComment.setup()*

`MiniComment.setup`({config})

Module setup

Parameters~

{config} `(table)` Module config table. See |MiniComment.config|.

Usage~

`require('mini.comment').setup({})` (replace `{}` with your `config` table)

------------------------------------------------------------------------------

*MiniComment.config*

`MiniComment.config`

Module config

Default values:

>

MiniComment.config = {

-- Module mappings. Use `''` (empty string) to disable one.

mappings = {

-- Toggle comment (like `gcip` - comment inner paragraph) for both

-- Normal and Visual modes

comment = 'gc',

-- Toggle comment on current line

comment_line = 'gcc',

-- Define 'comment' textobject (like `dgc` - delete whole comment block)

textobject = 'gc',

},

-- Hook functions to be executed at certain stage of commenting

hooks = {

-- Before successful commenting. Does nothing by default.

pre = function() end,

-- After successful commenting. Does nothing by default.

post = function() end,

},

}

<

------------------------------------------------------------------------------

*MiniComment.operator()*

`MiniComment.operator`({mode})

Main function to be mapped

It is meant to be used in expression mappings (see |map-<expr>|) to enable

dot-repeatability and commenting on range. There is no need to do this

manually, everything is done inside |MiniComment.setup()|.

It has a somewhat unintuitive logic (because of how expression mapping with

dot-repeatability works): it should be called without arguments inside

expression mapping and with argument when action should be performed.

Parameters~

{mode} `(string)` Optional string with 'operatorfunc' mode (see |g@|).

Return~

`(string)` 'g@' if called without argument, '' otherwise (but after

performing action).

------------------------------------------------------------------------------

*MiniComment.toggle_lines()*

`MiniComment.toggle_lines`({line_start}, {line_end})

Toggle comments between two line numbers

It uncomments if lines are comment (every line is a comment) and comments

otherwise. It respects indentation and doesn't insert trailing

whitespace. Toggle commenting not in visual mode is also dot-repeatable

and respects |count|.

Before successful commenting it executes `MiniComment.config.hooks.pre`.

After successful commenting it executes `MiniComment.config.hooks.post`.

# Notes~

1. Currently call to this function will remove marks inside written range.

Use |lockmarks| to preserve marks.

Parameters~

{line_start} `(number)` Start line number (inclusive from 1 to number of lines).

{line_end} `(number)` End line number (inclusive from 1 to number of lines).

------------------------------------------------------------------------------

*MiniComment.textobject()*

`MiniComment.textobject`()

Comment textobject

This selects all commented lines adjacent to cursor line (if it itself is

commented). Designed to be used with operator mode mappings (see |mapmode-o|).

Before successful textobject usage it executes `MiniComment.config.hooks.pre`.

After successful textobject usage it executes `MiniComment.config.hooks.post`.

==============================================================================

------------------------------------------------------------------------------

*mini.completion*

*MiniCompletion*

Custom somewhat minimal autocompletion Lua plugin. Key design ideas:

- Have an async (with customizable 'debounce' delay) 'two-stage chain

completion': first try to get completion items from LSP client (if set

up) and if no result, fallback to custom action.

- Managing completion is done as much with Neovim's built-in tools as

possible.

Features:

- Two-stage chain completion:

- First stage is an LSP completion implemented via

|MiniCompletion.completefunc_lsp()|. It should be set up as either

|completefunc| or |omnifunc|. It tries to get completion items from

LSP client (via 'textDocument/completion' request). Custom

preprocessing of response items is possible (with

`MiniCompletion.config.lsp_completion.process_items`), for example

with fuzzy matching. By default items which are not snippets and

directly start with completed word are kept and sorted according to

LSP specification. Supports `additionalTextEdits`, like auto-import

and others (see 'Notes').

- If first stage is not set up or resulted into no candidates, fallback

action is executed. The most tested actions are Neovim's built-in

insert completion (see |ins-completion|).

- Automatic display in floating window of completion item info (via

'completionItem/resolve' request) and signature help (with highlighting

of active parameter if LSP server provides such information). After

opening, window for signature help is fixed and is closed when there is

nothing to show, text is different or

when leaving Insert mode.

- Automatic actions are done after some configurable amount of delay. This

reduces computational load and allows fast typing (completion and

signature help) and item selection (item info)

- Autoactions are triggered on Neovim's built-in events.

- User can force two-stage completion via

|MiniCompletion.complete_twostage()| (by default is mapped to

`<C-Space>`) or fallback completion via

|MiniCompletion.complete_fallback()| (maped to `<M-Space>`).

What it doesn't do:

- Snippet expansion.

- Many configurable sources.

- Automatic mapping of `<CR>`, `<Tab>`, etc., as those tend to have highly

variable user expectations. See 'Helpful key mappings' for suggestions.

# Setup~

This module needs a setup with `require('mini.completion').setup({})`

(replace `{}` with your `config` table). It will create global Lua table

`MiniCompletion` which you can use for scripting or manually (with

`:lua MiniCompletion.*`).

See |MiniCompletion.config| for `config` structure and default values.

# Notes~

- More appropriate, albeit slightly advanced, LSP completion setup is to set

it not on every `BufEnter` event (default), but on every attach of LSP

client. To do that:

- Use in initial config:

`lsp_completion = {source_func = 'omnifunc', auto_setup = false}`.

- In `on_attach()` of every LSP client set 'omnifunc' option to exactly

`v:lua.MiniCompletion.completefunc_lsp`.

- If you have trouble using custom (overriden) |vim.ui.input| (like from

'stevearc/dressing.nvim'), make automated disable of 'mini.completion'

for input buffer. For example, currently for 'dressing.nvim' it can be

with `au FileType DressingInput lua vim.b.minicompletion_disable = true`.

- Support of `additionalTextEdits` tries to handle both types of servers:

- When `additionalTextEdits` are supplied in response to

'textDocument/completion' request (like currently in 'pyright').

- When `additionalTextEdits` are supplied in response to

'completionItem/resolve' request (like currently in

'typescript-language-server'). In this case to apply edits user needs

to trigger such request, i.e. select completion item and wait for

`MiniCompletion.config.delay.info` time plus server response time.

# Comparisons~

- 'nvim-cmp':

- More complex design which allows multiple sources each in form of

separate plugin. `MiniCompletion` has two built in: LSP and fallback.

- Supports snippet expansion.

- Doesn't have customizable delays for basic actions.

- Doesn't allow fallback action.

- Doesn't provide signature help.

# Helpful key mappings~

To use `<Tab>` and `<S-Tab>` for navigation through completion list, make

these key mappings:

`vim.api.nvim_set_keymap('i', '<Tab>', [[pumvisible() ? "\<C-n>" : "\<Tab>"]], { noremap = true, expr = true })`

`vim.api.nvim_set_keymap('i', '<S-Tab>', [[pumvisible() ? "\<C-p>" : "\<S-Tab>"]], { noremap = true, expr = true })`

To get more consistent behavior of `<CR>`, you can use this template in

your 'init.lua' to make customized mapping: >

local keys = {

['cr'] = vim.api.nvim_replace_termcodes('<CR>', true, true, true),

['ctrl-y'] = vim.api.nvim_replace_termcodes('<C-y>', true, true, true),

['ctrl-y_cr'] = vim.api.nvim_replace_termcodes('<C-y><CR>', true, true, true),

}

_G.cr_action = function()

if vim.fn.pumvisible() ~= 0 then

-- If popup is visible, confirm selected item or add new line otherwise

local item_selected = vim.fn.complete_info()['selected'] ~= -1

return item_selected and keys['ctrl-y'] or keys['ctrl-y_cr']

else

-- If popup is not visible, use plain `<CR>`. You might want to customize

-- according to other plugins. For example, to use 'mini.pairs', replace

-- next line with `return require('mini.pairs').cr()`

return keys['cr']

end

end

vim.api.nvim_set_keymap('i', '<CR>', 'v:lua._G.cr_action()', { noremap = true, expr = true })

<

# Highlight groups~

* `MiniCompletionActiveParameter` - highlighting of signature active parameter.

By default displayed as plain underline.

To change any highlight group, modify it directly with |:highlight|.

# Disabling~

To disable, set `g:minicompletion_disable` (globally) or

`b:minicompletion_disable` (for a buffer) to `v:true`. Considering high

number of different scenarios and customization intentions, writing exact

rules for disabling module's functionality is left to user. See

|mini.nvim-disabling-recipes| for common recipes.

------------------------------------------------------------------------------

*MiniCompletion.setup()*

`MiniCompletion.setup`({config})

Module setup

Parameters~

{config} `(table)` Module config table. See |MiniCompletion.config|.

Usage~

`require('mini.completion').setup({})` (replace `{}` with your `config` table)

------------------------------------------------------------------------------

*MiniCompletion.config*

`MiniCompletion.config`

Module config

Default values:

>

MiniCompletion.config = {

-- Delay (debounce type, in ms) between certain Neovim event and action.

-- This can be used to (virtually) disable certain automatic actions by

-- setting very high delay time (like 10^7).

delay = { completion = 100, info = 100, signature = 50 },

-- Maximum dimensions of floating windows for certain actions. Action

-- entry should be a table with 'height' and 'width' fields.

window_dimensions = {

info = { height = 25, width = 80 },

signature = { height = 25, width = 80 },

},

-- Way of how module does LSP completion

lsp_completion = {

-- `source_func` should be one of 'completefunc' or 'omnifunc'.

source_func = 'completefunc',

-- `auto_setup` should be boolean indicating if LSP completion is set up

-- on every `BufEnter` event.

auto_setup = true,

-- `process_items` should be a function which takes LSP

-- 'textDocument/completion' response items and word to complete. Its

-- output should be a table of the same nature as input items. The most

-- common use-cases are custom filtering and sorting. You can use

-- default `process_items` as `MiniCompletion.default_process_items()`.

process_items = --<function: filters out snippets; sorts by LSP specs>,

},

-- Fallback action. It will always be run in Insert mode. To use Neovim's

-- built-in completion (see `:h ins-completion`), supply its mapping as

-- string. Example: to use 'whole lines' completion, supply '<C-x><C-l>'.

fallback_action = --<function: like `<C-n>` completion>,

-- Module mappings. Use `''` (empty string) to disable one. Some of them

-- might conflict with system mappings.

mappings = {

force_twostep = '<C-Space>', -- Force two-step completion

force_fallback = '<A-Space>', -- Force fallback completion

},

-- Whether to set Vim's settings for better experience (modifies

-- `shortmess` and `completeopt`)

set_vim_settings = true,

}

<

------------------------------------------------------------------------------

*MiniCompletion.auto_completion()*

`MiniCompletion.auto_completion`()

Auto completion

Designed to be used with |autocmd|. No need to use it directly, everything

is setup in |MiniCompletion.setup|.

------------------------------------------------------------------------------

*MiniCompletion.complete_twostage()*

`MiniCompletion.complete_twostage`({fallback}, {force})

Run two-stage completion

Parameters~

{fallback} `(boolean)` Whether to use fallback completion.

{force} `(boolean)` Whether to force update of completion popup.

------------------------------------------------------------------------------

*MiniCompletion.complete_fallback()*

`MiniCompletion.complete_fallback`()

Run fallback completion

------------------------------------------------------------------------------

*MiniCompletion.auto_info()*

`MiniCompletion.auto_info`()

Auto completion entry information

Designed to be used with |autocmd|. No need to use it directly, everything

is setup in |MiniCompletion.setup|.

------------------------------------------------------------------------------

*MiniCompletion.auto_signature()*

`MiniCompletion.auto_signature`()

Auto function signature

Designed to be used with |autocmd|. No need to use it directly, everything

is setup in |MiniCompletion.setup|.

------------------------------------------------------------------------------

*MiniCompletion.stop()*

`MiniCompletion.stop`({actions})

Stop actions

This stops currently active (because of module delay or LSP answer delay)

actions.

Designed to be used with |autocmd|. No need to use it directly, everything

is setup in |MiniCompletion.setup|.

Parameters~

{actions} `(table)` Array containing any of 'completion', 'info', or

'signature' string.

------------------------------------------------------------------------------

*MiniCompletion.on_text_changed_i()*

`MiniCompletion.on_text_changed_i`()

Act on every |TextChangedI|

------------------------------------------------------------------------------

*MiniCompletion.on_text_changed_p()*

`MiniCompletion.on_text_changed_p`()

Act on every |TextChangedP|

------------------------------------------------------------------------------

*MiniCompletion.completefunc_lsp()*

`MiniCompletion.completefunc_lsp`({findstart}, {base})

Module's |complete-function|

This is the main function which enables two-stage completion. It should be

set as one of |completefunc| or |omnifunc|.

No need to use it directly, everything is setup in |MiniCompletion.setup|.

------------------------------------------------------------------------------

*MiniCompletion.default_process_items()*

`MiniCompletion.default_process_items`({items}, {base})

Default `MiniCompletion.config.lsp_completion.process_items`

==============================================================================

------------------------------------------------------------------------------

*mini.cursorword*

*MiniCursorword*

Minimal and fast module for autohighlighting word under cursor with

customizable delay. Current word under cursor can be highlighted

differently. Highlighting is triggered only if current cursor character is

a |[:keyword:]|. "Word under cursor" is meant as in Vim's |<cword>|:

something user would get as 'iw' text object. Highlighting stops in insert

and terminal modes.

# Setup~

This module needs a setup with `require('mini.cursorword').setup({})`

(replace `{}` with your `config` table). It will create global Lua table

`MiniCursorword` which you can use for scripting or manually (with

`:lua MiniCursorword.*`).

See |MiniCursorword.config| for `config` structure and default values.

# Highlight groups~

* `MiniCursorword` - highlight group of cursor word. Default: plain underline.

* `MiniCursorwordCurrent` - highlight group of a current word under

cursor. It will be displayed on top of `MiniCursorword`

(so `:hi clear MiniCursorwordCurrent` will lead to showing

`MiniCursorword` highlight group). Note: To not highlight it, use

`:hi! MiniCursorwordCurrent gui=nocombine guifg=NONE guibg=NONE` .

To change any highlight group, modify it directly with |:highlight|.

# Disabling~

To disable core functionality, set `g:minicursorword_disable` (globally) or

`b:minicursorword_disable` (for a buffer) to `v:true`. Considering high

number of different scenarios and customization intentions, writing exact

rules for disabling module's functionality is left to user. See

|mini.nvim-disabling-recipes| for common recipes. Note: after disabling

there might be highlighting left; it will be removed after next

highlighting update.

Module-specific disabling:

- Don't show highlighting if cursor is on the word that is in a blocklist

of current filetype. In this example, blocklist for "lua" is "local" and

"require" words, for "javascript" - "import":

>

_G.cursorword_blocklist = function()

local curword = vim.fn.expand('<cword>')

local filetype = vim.api.nvim_buf_get_option(0, 'filetype')

-- Add any disabling global or filetype-specific logic here

local blocklist = {}

if filetype == 'lua' then

blocklist = { 'local', 'require' }

elseif filetype == 'javascript' then

blocklist = { 'import' }

end

vim.b.minicursorword_disable = vim.tbl_contains(blocklist, curword)

end

-- Make sure to add this autocommand *before* calling module's `setup()`.

vim.cmd('au CursorMoved * lua _G.cursorword_blocklist()')

------------------------------------------------------------------------------

*MiniCursorword.setup()*

`MiniCursorword.setup`({config})

Module setup

Parameters~

{config} `(table)` Module config table. See |MiniCursorword.config|.

Usage~

`require('mini.cursorword').setup({})` (replace `{}` with your `config` table)

------------------------------------------------------------------------------

*MiniCursorword.config*

`MiniCursorword.config`

Module config

Default values:

>

MiniCursorword.config = {

-- Delay (in ms) between when cursor moved and when highlighting appeared

delay = 100,

}

<

------------------------------------------------------------------------------

*MiniCursorword.auto_highlight()*

`MiniCursorword.auto_highlight`()

Auto highlight word under cursor

Designed to be used with |autocmd|. No need to use it directly,

everything is setup in |MiniCursorword.setup|.

------------------------------------------------------------------------------

*MiniCursorword.auto_unhighlight()*

`MiniCursorword.auto_unhighlight`()

Auto unhighlight word under cursor