Stars
Open-source smart watch, based on LittlevGL Embedded GUI Library
A GPS bicycle speedometer that supports offline maps and track recording
Retro emulation for the ODROID-GO and other ESP32 devices
DAPLink (CMSIS-DAP) porting to Artery AT32F425, WCH CH32V203 and CH32V305.
本项目是基于 ESP32 IDF 的 LCD GC9D01 驱动，适用于小型 SPI 屏幕（<1 英寸）。支持 RGB565 色彩、基本图形绘制（像素、线条、形状）以及中英文字符和图片显示。
An Arduino library for using a single button for multiple purpose input.
A cross-platform G-Code sender for GRBL, Smoothieware, TinyG and G2core.
A 3D printed bot for drawing with Etch-A-Sketch
YOLOv10: Real-Time End-to-End Object Detection [NeurIPS 2024]
An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino
Server backend for the Etch-a-Sketch robot
🖼✨Automatically generates line drawing from a photograph
Convert vector graphics to g-code for pen plotters, laser engravers, and other CNC machines
A basic custom firmware to show a running example on the TN2115S2 SoC inside of the Passive NFC E-Paper Displays from Waveshare
This project is built to record the orientation a FPV headset to allow the camera on your RC to follow your head movements.
Espressif IoT Development Framework. Official development framework for Espressif SoCs.
Espressif Mesh Development Framework, limited maintain, recommend to use https://github.com/espressif/esp-mesh-lite
Playing around with CANopenNode to fully expand the true potential of CAN bus on ESP32.