Linux kernel source tree

MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems

Klipper is a 3d-printer firmware

GameStream client for Android

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

16-bit Windows (Windows 1.x, 2.x, 3.0, 3.1, etc.) on 64-bit Windows

Resizable BAR for (almost) any UEFI system

FW for ESP8266/ESP8285/ESP32 used with 3D printer

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70

Mini Drone/Quadcopter Firmware for ESP32 and ESP32-S Series SoCs.

AT application for ESP32/ESP32-C2/ESP32-C3/ESP32-C6/ESP8266

OO C++ RepRap Firmware

Arduino library for Heltec ESP32 (or ESP32+LoRa) based boards

This is Octopus open source material

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encod…

Firmware for the PanelDue touch screen for 3D printers

This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TU…

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate…

Translations for the Klipper project ( https://www.klipper3d.org/ )

ESP3D Firmware for ESP32 based TFT

SeaBIOS testing

Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu

Simple stupid SVG parser