Bitbanged DVI on the RP2040 Microcontroller

CP/M for the Z80 Playground that runs on the FAT disk format

CP/M CBIOS and ROM Monitor plus CP/M tools for the Z80 Playground

CP/M for the Z80 Playground that runs on the FAT disk format

SVI-3x8 PicoExpander project is a memory, disk and tape expansion emulator for Spectravideo 318 and 328 which uses a Raspberry Pico 2 W microcontroller board to emulate devices in the expansion bus.

The Z80-MBC2 is an easy to build Z80 SBC (Single Board Computer). It is the "evolution" of the Z80-MBC, with a SD as "disk emulator" and with a 128KB banked RAM for CP/M 3 (but it can run CP/M 2.2 …

HW/SW solution for Fluke 9010 mainframe emulation

Emulate floppy disks on the SV-318/328

M4 Board, z80 rom part

Micropython bindings to LVGL for Embedded devices, Unix and JavaScript

RunCPM for the Raspberry Pico

Geoff's VT100 Terminal

System, apps and tooling for the Gigatron TTL microcomputer

Pi Pico VGA Terminal Emulator For RC2014

VGA/TV display on Raspberry Pico (Linux/cmake)

Python-based project that provides wrapper to python-kasa for MQTT access

🏠🤖 Python API for TP-Link smarthome products

OpenSCAD library

The Belfry OpenScad Library, v2.0. An OpenSCAD library of shapes, masks, and manipulators to make working with OpenSCAD easier. BETA

This repository is about running LVGL under Micropython firmware on the cheap yellow display.

Building a community around a cheap ESP32 Display with a touch screen

MicroPython ILI9341Display & XPT2046 Touch Screen Driver

A collection of shell and Perl scripts that build a read-only Linux for the Pi Zero, that boots straight to Minicom

Micropython examples for Cheap Yellow Display ESP32

A frustration-free library for working with all 24-pin eink panels

Optimized library for driving parallel eink displays with the ESP32