DIY design of smart home hardware based on Home Assistant. It will include a variety of DIY smart home hardware: smart lights, smart switches, various sensors, automation devices, etc., and will be continuously updated.
a. Provides CAD files for direct 3D printing.
b. Offers hardware design for PCB fabrication.
c. Provides YAML configuration code for configuring corresponding functions in ESPHome.
(for usage instructions, refer to:https://www.bilibili.com/video/BV14ryhYHEJK/?spm_id_from=333.999.0.0&vd_source=eef55077bd933049fd878e3b9b8782e2)
【1】 funHomeLight： A night light based on ESP32-C3 + WS2812 + DS18B20, capable of displaying multiple colors, various display effects, timed on/off, temperature protection, and other features.
【2】funHomeSensorTH： The funHomeSensorTH is based on the ESP32-C3 + DHT11 and integrates temperature and humidity data acquisition functionality, with configurable reporting frequency.
【3】funHomeSwitch： funHomeSwitch is composed of modules such as the ES32C3, SG90 servo, ambient light sensor, lithium battery, etc. It can be installed on a standard 86-type switch and used with Home Assistant for remote light control.
【4】funHomeFan： The funHomeFan is an intelligent small fan project based on the ESP32C3, which can be remotely controlled via a smartphone to adjust the fan speed with 3 adjustable levels.
【5】funHomePcController： The funHomePcController is based on the ESP32-C3 and allows one-click remote control of a computer’s power on/off, with support for low power consumption.