StarTech HB31C2A2CB is a supported hub (tested) #601

I found that this hub (not in the supported list) works with uhubctl (tested on Ubuntu):

StarTech model HB31C2A2CB

USB ids:
Manufacturer: 14B0
ProductId: 013F
Rev: 0003

Note: On the device itself, it says "Rev 2"
I only tested with this revision, but I assume other revisions will work too.

The Hub has 2 USB-A Ports and 2 USB-C ports. Only the USB-A ports are power-controlled with uhubctl

I tested it with a ledger device which i needed to power-cycle. I could see it reset as expected.

log:

• uhubctl --action cycle --delay 0
  Current status for hub 1-1 [14b0:013f StarTech.com USB 2.0 HUB, USB 2.10, 5 ports, ppps]
  Port 1: 0100 power
  Port 2: 0100 power
  Port 3: 0103 power enable connect [2581:3b7c Ledger Ledger Wallet 0000]
  Port 4: 0100 power
  Port 5: 0100 power
  Sent power off request
  New status for hub 1-1 [14b0:013f StarTech.com USB 2.0 HUB, USB 2.10, 5 ports, ppps]
  Port 1: 0000 off
  Port 2: 0000 off
  Port 3: 0000 off
  Port 4: 0000 off
  Port 5: 0000 off
  Current status for hub 1-1 [14b0:013f StarTech.com USB 2.0 HUB, USB 2.10, 5 ports, ppps]
  Port 1: 0000 off
  Port 2: 0000 off
  Port 3: 0000 off
  Port 4: 0000 off
  Port 5: 0000 off
  Sent power on request
  New status for hub 1-1 [14b0:013f StarTech.com USB 2.0 HUB, USB 2.10, 5 ports, ppps]
  Port 1: 0100 power
  Port 2: 0100 power
  Port 3: 0100 power
  Port 4: 0100 power
  Port 5: 0100 power