MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ the…

Monitor and control Daikin/Rotex Altherma heat pumps from Home Assistant directly via the 2-wire P1/P2 thermostat interface. Also enables reading other Japanese Home Bus System based standards, a.o…

A collection of my ESPHome components

OTGateway is a powerful open-source solution for controlling OpenTherm-compatible boilers, turning your heating system into a smart one. Set the perfect temperature, save on energy bills, and elimi…

My collection of components for esphome

io-homecontrol documentation & implementation

Unifies the best innovations from previous Zigbee gateway projects into a single, comprehensive solution

ESPHome LD2410 mmWave Radar Sensor Custom Component

ESPHome components

Example of how to control an opentherm boiler with esphome

A ESP8266 devkit firmware for the Nodoshop version of the Opentherm Gateway (OTGW)

ESPHome components for MIoT devices

Bluetooth Low Energy (BLE) controller for ESPHome

ESPHome Component for Daikin Mini-Splits using the S21 serial port.

Custom components for ESPHome

Distance tracking for BLE iBeacons in esphome

Home Assistant OpenTherm Thermostat

Precompiled LibreTiny-ESPHome firmware allowing identification of device pins and OTA upgrading

Arduino-based controller for Daikin Altherma heat pumps. The controller connect to the Altherma heat pump via P1/P2 bus, has a built-in webserver for configuration (of the controller itself). Integ…

ESP32 OpenTherm Wi-Fi Thermostat

Port of OpenTherm protocol to ESPHome.io firmware.

ESPHome custom_components

An ESP32 based gateway that listens BLE beacons and sends the data to a MQTT broker

ESPhome Components from the little digger

Collection of own ESPhome components

SNMP component for ESPHome