Download

• Big Banana + AW Banana:
  Bluetooth_Full_Install_Big_AW_Banana.zip
• Pixie + Goose:
  Bluetooth-Install-Full-PIXIE-GOOSE.muxzip

Instructions

1. DO NOT UNZIP!
2. Copy the file to /ARCHIVE on sd1 or sd2.
3. On your device, go to:
   Application → Archive Manager → Bluetooth_Full_Install → Install
   (The device will reboot automatically.)

For Pixie + Goose

• After installation, the Bluetooth app will be available under Application.

For Big + AW Banana

1. Connect to Wi-Fi.
2. Go to Application → Task Toolkit → BluetoothLoader → Run.
   (The device may reboot automatically.)
3. After completion, the Bluetooth app will be available under Application.

Connection Methods

There are two connection methods for your device: Expect and None Expect.
If you cannot connect using Expect, restart your Bluetooth device and then use the None Expect method.

FAQs

If you encounter any problems, please visit the discussion thread.

• Bluetooth startup failed:
  Connect to any Wi-Fi network, reboot, and try Bluetooth again.

• Controller not working in RA:
  See this post or read ControllerConfiguration.txt.

• My BT devices are not showing:
  Try scanning with a timeout of 10 seconds or longer.

If you like it, and want to do something, please support me

Fix:

1. Fix - pagination - I didn't think you would have that many bluetooth devices. LOL!
2. Fix - bluetooth failed to start

For those who are running stable, you don't need to update.
If an update or first time installation is required, download the loader script included in this release.

Notes:

1. Bluetooth and wifi need to be on at the same time, if you have turned off wifi -> bluetooth cannot start.
   So make sure your wifi is always on.
2. If you have wifi turned on but can't turn on bluetooth, in this case I think you are using 2 memory cards
   How to fix: Try deleting the init folder in: sd2/muos/init and reboot your device.
3. If you still can't start bluetooth, try downloading the file below, unzip it and copy bluetooth.sh to: sd1/muos/init and reboot your device.
   bluetooth.zip
4. If you can't turn on bluetooth after all the ways. Flash the OS again.

Download:

Step 1. Expect expect.zip
Copy into "ARCHIVE" folder and install via Archive (only required for first time installation)

Step 2

Have you installed Expect yet? Let's do step 1! Damn!!!!!!

Bluetooth BluetoothLoader_20250116.zip
Require WIFI connection
Extract and copy BluetoothLoader.sh into "sd1/MUOS/Task" folder
Run BluetoothLoader from Application/Task ToolKit
Once completed, the Bluetooth App will be available in Application
The application is always updated to the latest on the main branch.
You just need to run BluetoothLoader from Task ToolKit again to update.

Lastly, thank you all for supporting the project. I didn't expect it to be so well received.
Thanks to MUOS development team and members who helped me build this project.
Best regards!

1. Expect
   Copy into "ARCHIVE" folder and install via Archive (only required for first time installation)
   expect.zip

2. Bluetooth

• [Method 1] Copy into "ARCHIVE" folder and install via Archive
  Bluetooth20250108_2.zip

• [Method 2] Require WIFI connection
  BluetoothLoader.zip

  Extract and copy BluetoothLoader.sh into "sd1/MUOS/Task" folder
  Run BluetoothLoader from Application/Task ToolKit
  Once completed, the Bluetooth App will be available in Application
  The application is always updated to the latest on the main branch.
  You just need to run BluetoothLoader from Task ToolKit again to update

3. Common problems:

• Bluetooth started failed!!
  I think you are using 2 memory cards.
  Copy sd1/muos/init/bluetooth.sh to sd2/muos/init/bluetooth.sh
  Reboot and try again

1. Expect
   Copy into "ARCHIVE" folder and install via Archive (only required for first time installation)
   expect.zip

2. Bluetooth

• [Method 1] Copy into "ARCHIVE" folder and install via Archive
  Bluetooth20250108.zip

• [Method 2] Require WIFI connection
  BluetoothLoader.zip

  Extract and copy BluetoothLoader.sh into "MUOS/Task" folder
  Run BluetoothLoader from Application/Task ToolKit
  Once completed, the Bluetooth App will be available in Application
  The application is always updated to the latest on the main branch.
  You just need to run BluetoothLoader from Task ToolKit again to update

1. Expect
   Copy into "ARCHIVE" folder and install via Archive (only required for first time installation)
   expect.zip

2. Bluetooth

• [Method 1] Copy into "ARCHIVE" folder and install via Archive
  Bluetooth20250107.zip

• [Method 2] Require WIFI connection
  BluetoothLoader.zip
  Extract and copy BluetoothLoader.sh into "MUOS/Task" folder
  Run BluetoothLoader from Application/Task ToolKit
  Once completed, the Bluetooth App will be available in Application
  The application is always updated to the latest on the main branch.
  You just need to run BluetoothLoader from Task ToolKit again to update

Note: If you are using 2 memory cards.

• Go to Configuration->Storage->User Init Scripts and select SD1

1. expect.zip

• Copy into "ARCHIVE" folder and install via Archive
  =>expect only required for first time installation

2. BluetoothLoader.zip

• Extract and copy BluetoothLoader.sh into "MUOS/Task" folder
• Run BluetoothLoader from Application/Task ToolKit
• Once completed, the Bluetooth App will be available in Application

The application is always updated to the latest on the main branch.
You just need to run BluetoothLoader from Task ToolKit again to update

3. Manage audio output with full functionality.

Increase or decrease the volme is now available

• When connecting to an audio device, a confirmation screen will appear
• Press L1 to manual select the audio output you want.

Tips: When disconnecting the audio, you need to press L1 to re-select the audio output. Then you can increase or decrease the volume.

BluetoothLoader.zip

1. Extract and copy
   BluetoothLoader.sh into "MUOS/Task" folder
2. Run BluetoothLoader from Application/Task ToolKit
3. Once completed, the Bluetooth App will be available in Application

The application is always updated to the latest on the main branch.
You just need to run BluetoothLoader from Task ToolKit again to update