Skip to content
This repository was archived by the owner on Aug 18, 2026. It is now read-only.

drs.md

Latest commit

 

History

History
69 lines (53 loc) · 2.4 KB

drs.md

File metadata and controls

69 lines (53 loc) · 2.4 KB
Raw

DRS Group

Covers the nvapi-cli drs command group (src/cli/drs.cpp). It opens a DRS session (NvAPI_DRS_CreateSession) and loads settings (NvAPI_DRS_LoadSettings) for each command. --profile NAME is matched by name via NvAPI_DRS_FindProfileByName and uses UTF-8 conversion. --id ID refers to a DRS setting ID (32-bit). --name NAME resolves to an ID with NvAPI_DRS_GetSettingIdFromName.

nvapi-cli drs profiles
nvapi-cli drs apps --profile NAME
nvapi-cli drs settings --profile NAME [--start N] [--limit N]
nvapi-cli drs setting get --profile NAME (--id ID|--name NAME)
nvapi-cli drs setting set --profile NAME (--id ID|--name NAME) --dword VALUE
nvapi-cli drs profile create --name NAME
nvapi-cli drs profile delete --name NAME

Command Reference

drs profiles

Uses NvAPI_DRS_GetNumProfiles, NvAPI_DRS_EnumProfiles, and NvAPI_DRS_GetProfileInfo to list profiles and their metadata (predefined flag, app count, setting count).

drs apps

Uses NvAPI_DRS_EnumApplications to list applications attached to a profile, enumerated in batches.

--profile NAME # profile name to inspect

drs settings

Uses NvAPI_DRS_EnumSettings to list settings for a profile. The CLI paginates with --start and limits output with --limit.

--profile NAME # profile name to inspect
--start N # starting index for enumeration
--limit N # maximum settings to print (default 50)

drs setting get

Uses NvAPI_DRS_GetSetting to read a single setting by ID. If --name is provided, the CLI resolves it to an ID first.

--profile NAME # profile name
--id ID # setting ID
--name NAME # setting name (resolved to ID)
# exactly one of --id or --name is required

drs setting set

Uses NvAPI_DRS_SetSetting and NvAPI_DRS_SaveSettings to update a setting in the current profile. The CLI writes only DWORD settings.

--profile NAME # profile name
--id ID # setting ID
--name NAME # setting name (resolved to ID)
--dword VALUE # new DWORD value
# only DWORD settings are supported by this command

drs profile create

Uses NvAPI_DRS_CreateProfile and NvAPI_DRS_SaveSettings to create a new profile with the supplied name.

--name NAME # new profile name

drs profile delete

Uses NvAPI_DRS_DeleteProfile and NvAPI_DRS_SaveSettings to delete an existing profile by name.

--name NAME # profile name to delete