FT8 encoder and decoder in pure TypeScript

PaperSat is a satellite tracking application for the M5Paper S3 e-ink device. It displays real-time satellite position on a polar sky plot, shows upcoming passes, and allows full on-device configur…

Morse Contest Practice

Experimental SSB/CW transmitter for QO-100 satellite (Es'hail 2) using SX1280 module + Raspberry Pi Pico. USB Audio input, +27 dBm output, real-time DSP (filter, EQ, compressor), CDC serial control…

An extremely compact offline media server for Movies, Shows, Books, and Music.

Bjorn is a powerful network scanning and offensive security tool for the Raspberry Pi with a 2.13-inch e-Paper HAT. It discovers network targets, identifies open ports, exposed services, and potent…

A command-line tool for checking real-time HF radio propagation conditions.

3D printed beam construction set

A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol

Examples for Shelly Scripts for Gen2 Shelly devices

Unleash your FlexRadio. Connect directly to Wavelog without complex CAT middleware. Visualize enriched DX spots on your Panadapter, sync frequency instantly, and automate your logging workflow.

BASH Scripts that Install Ham Radio Software on the Raspberry Pi

VHF / UHF Antenne für den Balkon oder Portabeleinsatz

EFR32-based handheld transceiver

VP-Digi - a functional, cheap, easy to assemble and configure STM32-based APRS digipeater controller with built-in KISS modem.

Injector PCB to use regular CAT6 or CAT7 ethernet cable to send 4x RF signals and 2x DC power

Starter project for using the Espressif ESP32-S3-USB-OTG board as a bluetooth keyboard dongle. A USB keyboard it connected to the USB-HOST port and the keystrokes are output through bluetooth.

A Hexagonal Model Rocket by Concretedog

Adds additional functionality to KM6LYW DigiPi image

Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.

使用MMANA-GAL仿真（Simulation with MMANA-GAL）

QO-100 Software Transceiver using an Adalm-Pluto and an SBC (Raspberry, Odroid ...)

Remotely open audio channels and a serial port to an Icom RS-BA1 server (for ex. Icom IC-705 transceiver).

Adds various experimental features to the uvk5 radio

Installation scripts for running Winlink (RMS Express/Trimode & VARA) on non-Windows computers. Wine & Box86 make this project possible.

Open source handheld ham radio project KV4P-HT

Proper working Arduino library for the Heltec ESP32 LoRa v3 board, as well as for Wireless Stick v3 and Wireless Stick Lite v3. Uses RadioLib

Notes on the QMTECH ZYNQ XC7Z020 starter kit

MeshCom Client 4.0