3 Axis Machining Project utilizing both 2D and 3D Toolpaths on a HAAS VF2. Designed and drawn in Solidworks. Programmed in Mastercam.

This project was done in 2 operations, one per side of the block. Starting with a 2x2x4" rough stock of 1030 CRS. Tolerances are shown in the drawings.

Tool List:

• 3.00" Face Mill
• 0.500" Roughing Endmill HSS
• 0.375" Roughing Endmill HSS
• 0.375" Finishing Endmill HSS
• 0.500" Finishing Endmill HSS
• 1/2" Spot Drill
• 0.5000" Reamer
• No.7 Drill
• 1/4-20 Tap
• 1/2" Carbide Chamfer Mill
• #3 Center Drill
• 0.250" Bull Nose Carbide End Mill (0.015 Nose rad)

Total Machining time: 3.75Hours