A 3D model of a holder for a rope.
Actually it is less configurable. It is designed for a (nylon) rope with 3 skeins, skein diameter 15mm, rope diameter 28mm. This can be attached to a 30mm wide clamp with an M6 screw.
Print the 2 parts with 100% infill.
Screw to a clamp (width 30mm, thickness 3mm):
- 1x bolt M6, length 16mm, hex head
- 1x nut M6
- 1x washer M6
Screws for mounting on a rope:
- 4x bolt M5, length 30mm, round head (width 10mm)
- 4x nut M5