MediaPipe examples which stream their detections over OSC to be used in other applications.

Currently this is only tested on Windows and MacOS. It's recommended to use Python3 (>3.7) and a virtual environment.

python install -r requirements.txt

To run an example use the basic python command to start up the script.

# start pose detection with webcam 0
python pose.py --input 0

# start pose detection with video
python pose.py --input yoga.mp4

Other parameters are documented in the following list or algorithm specific.

• input - The video input path or video camera id (default 0)
• min-detection-confidence - Minimum confidence value ([0.0, 1.0]) for the detection to be considered successful. (default 0.5)
• min-tracking-confidence - Minimum confidence value ([0.0, 1.0]) to be considered tracked successfully. (default 0.5)
• ip - OSC ip address to send to (default 127.0.0.1)
• port - OSC port to send to (default 7500)

The landmark model currently included in MediaPipe Pose predicts the location of 33 full-body landmarks (see figure below), each with (x, y, z, visibility). Note that the z value should be discarded as the model is currently not fully trained to predict depth, but this is something we have on the roadmap.

Reference: mediapipe/solutions/pose

Additional Parameters

--model-complexity MODEL_COMPLEXITY
                      Set model complexity (0=Light, 1=Full, 2=Heavy).
--no-smooth-landmarks
                      Disable landmark smoothing.
--static-image-mode   Enables static image mode.

• count - Indicates how many poses are detected (currently only 0 or 1)
• list of landmarks (33 per pose) (if pose has been detected)
  • x - X-Position of the landmark
  • y - Y-Position of the landmark
  • z - Z-Position of the landmark
  • visibility - Visibility of the landmark

/mediapipe/pose [count, x, y, z, visibility, x, y, z, visibility ...]

The hand detection model is able to detect and track 21 3D landmarks.

• count - Indicates how many hands are detected
• list of landmarks (21 per hand) (if hands has been detected)
  • x - X-Position of the landmark
  • y - Y-Position of the landmark
  • z - Z-Position of the landmark
  • visibility - Visibility of the landmark

/mediapipe/hands [count, x, y, z, visibility, x, y, z, visibility ...]

The face detection model is able to detect multiple faces and 5 keypoints. At the moment only the bounding box is sent over OSC.

All values are normalized to the image width and height.

• count - Indicates how many faces are detected
• list of one bounding box per face (if faces has been detected)
  • xmin - X-Position of the top-left bounding box anchor
  • ymin - Y-Position of the top-left bounding box anchor
  • width - Width of the bounding box
  • height - Height of the bounding box
  • score - Confidence score of the bounding box

/mediapipe/faces [count, xmin, ymin, width, height, score, xmin, ymin, width, height, score ...]

tbd

Currently, there are very basic receiver examples for processing. Check out the examples folder.

• Example code and documentation adapted from google/mediapipe
• OSC sending and examples implemented by cansik