Software for rendering statemaps

Official OpenOCD with "espusbjtag" driver fixed for FPGA (RUNTEST bugfix)

Custom firmware for a 3-key + rotary encoder macropad (https://hackaday.io/project/189914)

chan_dongle channel driver for Huawei UMTS cards, works with Asterisk 14+

An FPGA-based USB full-speed device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB full-speed device端…

Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)

Minimig project example for ULX3S

wolfSSH is a small, fast, portable SSH implementation, including support for SCP and SFTP.

BlackIce port of the Open Bench Logic Sniffer

a USB2 highspeed device core, written in amaranth HDL

A 5$ Xilinx ZYNQ development board.

nMigen examples for the ULX3S board

vacation / out-of-office plugin for RoundCube

QEMU with an STM32 microcontroller implementation

Community driven firmware and hardware for Bus Pirate version 3 and 4

Open-source KVM software

PicoRV32 - A Size-Optimized RISC-V CPU

Realtek RTD2660/2662 programmer

Open Source 4k CSI-2 Rx core for Xilinx FPGAs

Alternative firmware for the B3603

Alternative firmware for the BST900 boost converter for serial control

Community developed firmware for Bus Pirate version 3 and 4

Mainline and Android Common Linux kernel for Samsung Galaxy Tab 10.1

Configuration files for use with cbootimage

Some simple utilities for working with Quill files

JTAG Versaloon firmware for the STM32 Bluepill board

Set the voltage of a Quick Charge 3.0 source via the Arduino.

Alternative firmware for the B3603