ESP32 EVSE firmware

ESP32 EVSE firmware

HMI for ESP32-EVSE based on ESPHome and LVGL

ESPHome component to monitor and control a EVSE wallbox

CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)

Run Obsidian.md in a browser via a docker container.

Build your personal knowledge base with Trilium Notes

BleBox custom component (supports 11 device types)

Zigbee Coordinator based on the Wemos D1 Mini, using the Zigbee2Tasmota firmware

library for ESP32 to bridge ESPNow and MQTT

initial

psa_car_controller addons for Home Assistant

openpilot is an operating system for robotics. Currently, it upgrades the driver assistance system on 300+ supported cars.

Integration between Peugeot API and Home Assistant

An Python application for sending diagnostic frames over CAN-BUS to PSA/Stellantis based cars

PSA/Stellantis Automotive Diagnostic Tool with VCI Support

Control psa car with connected_car v4 API.

M-BUS powered ESP32-C3 AMS reader

ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from AMS electrical meters, both DLMS and DSMR is supported

ESPHome external component for reading P1 data from (Swedish) electricity meters

ESP32/ESP8266 HAN (M-Bus Metering Data) to MQTT

Компонент EspHome для счетчиков Энергомера CE102M, CE301, CE303, CE307 (IEC/МЭК/ГОСТ 61107)

ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

ESPHome custom component for reading P1 data from electricity meters.

Supports DLMS/Cosem IEC IEC 62056-21 Mode E (Hdlc), session mode and passive PUSH mode readout. Подключение EspHome к счетчикам электроэнергии по протоколу СПОДЭС ГОСТ Р 58940-202 (Энергомера ce207…

App to bypass censorship on Android

ESPHome component to read out DLMS smart meters via M-Bus

Use a Wemos ESP32-C3 Pico to read data from P1 port of your belgian electricity counter with ESPhome