This repository is for mini tower case's OLED 0.96 screen

1. Turn on i2c function by using sudo raspi-config -> interface options -> i2c -> enable -> yes.
2. Check if the screen has been recognized by Raspberry Pi

i2cdetect -y 1 

if encount command not found error, please install i2c-tools by using sudo apt update && sudo apt -y install i2c-tools.

3. Install dependencies libraries:

sudo apt -y install python3 python3-pip python3-pil libjpeg-dev zlib1g-dev libfreetype6-dev liblcms2-dev libopenjp2-7 libtiff5

4. Grant privilleges to user pi

sudo usermod -a -G gpio,i2c pi

5. Download sample code from this repo:

git clone https://github.com/rm-hull/luma.examples.git
cd luma.examples/

6. Install the dependencies

sudo -H pip3 install -e .

7. Entering into example folder and test it.

cd examples/
sudo python3 sys_info.py

8. You should seen this screen on OLED: