Command-Line-Utility written in Python3.x for obtaining information via MTK GPS Modules and storing information (GPRMC) to InfluxDB via UDP and publish data to MQTT.

clone the repository to your machine and use pip to install the CLI:

pip install .

LINUX: In order to use this script you need sudo rights to open a serial port. (See Development)

WINDOWS: use COMx where x is the number of the serial port available through the Device Manager

usage: gpsinflux [-h] --config CONFIG

CLI for acquiring GPS values and storing it in InfluxDB and publishing data to MQTT

optional arguments:
  -h, --help       show this help message and exit
  --config CONFIG  configuration conf.json file with path.

A Configuration File conf.json is needed with the path to the file as an argument to run the script.

gpsinflux --config /etc/test/conf.json

Refer to conf.json for structure.

Topics on which data is published is as follows:

<device_ID>/location/gps/latitude
<device_ID>/location/gps/longitude
<device_ID>/groundVelocity/gps/sog
<device_ID>/groundVelocity/gps/cog

Data Format will be InfluxDB's Line Protocol

Use virtualenv to create a test environment as follows:

python -m venv venv
. venv/bin/activate

pip install -e .

For Development one needs to change the serial port rights to user and sudo won't be very helpful.

Change the serial port's rights as follows:

sudo chown -R <user>:<user> /dev/ttyUSB0

To exit the virtualenv

 deactivate

• Shantanoo Desai (des@biba.uni-bremen.de)

The Repository is published under the MIT License.

The file mt3339.py is published under the GNU Lesser General Public License v3. The Copy of the License and Notice is added to the respective file and within this repository.