Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

Low cost BLE Advertisements Repeater into Zigbee on TLRS825x

Routeur solaire / Solar Router

Hardware eMMC reader capable of reading Nintendo Switch boot0, boot1 and rawnand

DigitalPlat FreeDomain: Free Domain For Everyone

ESP32 MSC to SPI Flash demo

SMB client example for esp-idf

J1708_T4 is a network utility library that is compatible with the Teensy 4.x. It provides a basic UART commands for displaying, measuring, and sending traffic on an SAE J1708 bus. This code was wri…

Deye Firmware for LV and HV

Kernel tree for Xiaomi Redmi Note 8/8T (ginkgo/willow)

iPXE network bootloader

Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)

Raspberry Pi CM4 bindings for JD9365Z 720x1280 MIPI DSI displays

Open source FPGA-based NIC and platform for in-network compute

This is an Arduino library that implements the slave/server logic of the Modbus RTU protocol.

An operating system for ESP32 devices.

Redpill Recovery (arpl-i18n)

Opensource firmware for PocketPD

A fork of UNFS3 with a Golang backend

Lightweight SMB2/3 Server implemented in go

libfaketime modifies the system time for a single application

LD_PRELOAD-based fopen/open filename overrider

Provides packet processing capabilities for Go

A simple TUN/TAP library written in native Go.

A very rough start on an JK BMS interface for Victron Energy Systems

A simple useless pseudo-filesystem, coded for discovering the challenges of interfacing a filesystem with Linux VFS. It adds an "encryption" feature (a simple rotation of n, n given as an argument …