Repository navigation
Mark1 FDIM screen configuration #3
|
Is it possible to change the splash screen of FDIM from dual to single zone with Forscan? |
Replies: 3 comments 12 replies
|
do you mean the intro boot splash logo or the layout of the air con graphics? |
|
Another thing I just realised.. |
|
email me if you are still having issues, can sort it out |
|
I want to give it a go & program the VIN of my new FDIM to see if it will switch to single zone air con after having the right VIN. I found this scanner which is ms-can compatible and not too expensive. |
So as far as you know there's no feasible way I could ever buy a dual zone colour fdim and configure it to display the single zone graphics? They're a fair bit cheaper than the single zone ones is why I'm thinking about it. |
|
You can configure the colour mk 1 FDIM to be single or dual zone, I have software that does it |
|
I installed a titanium display in my base model territory, using a combination of titanium fdim titanium switch panel and the original radio unit from my base model and it works perfectly well, the dual zone only displays driver with nothing on the passenger side |
|
My problem I think is I used my original switch panel. I should have used the new switch panel as well :) |
This comment has been hidden.
This comment has been hidden.
|
There is a memory location on the colour MK1 and MK2 screens that you can read via service 0x22 readDataByLocalId and write to via service 0x2E that allows you to set a single zone FDIM to a Dual Zone FDIM and vice versa. I have created a software tool that allows you to convert single zone fdim to dual zone and vice versa - link here https://www.facebook.com/testerPresent%2Fposts%2Fpfbid02DTRSjXhtuYDz3cnkcUnqvWpgyeUGt2Rt2wX6n3gY2gAe9JTxoSXrYJdUDpinJfs4l |
There is a memory location on the colour MK1 and MK2 screens that you can read via service 0x22 readDataByLocalId and write to via service 0x2E that allows you to set a single zone FDIM to a Dual Zone FDIM and vice versa. I have created a software tool that allows you to convert single zone fdim to dual zone and vice versa - link here https://www.facebook.com/testerPresent%2Fposts%2Fpfbid02DTRSjXhtuYDz3cnkcUnqvWpgyeUGt2Rt2wX6n3gY2gAe9JTxoSXrYJdUDpinJfs4l