A Flipper Zero application for interfacing with the GhostESP: Revival firmware.

• Scanning & Probing

  • Scan and list WiFi APs and stations
  • Select targets by AP or station number
  • Listen for probe requests with channel hopping or fixed channel
  • Pineapple detection
  • Channel congestion analysis
  • Port scanning on local network or specific IP
  • ARP scanning on local network
  • SSH scanning on target IP

• Packet Capture

  • Variable sniffing modes (WPS, Raw, Probe, Deauth, Beacon, EAPOL, Pwn)
  • Cycling menu to switch between capture types
  • PCAP file export

• Beacon Spam & Attacks

  • Beacon spam modes: List, Random, Rickroll, Custom SSID
  • Deauthentication attacks
  • EAPOL logoff attacks
  • SAE handshake flood attacks (WPA3)
  • Karma rogue AP (with custom SSID support)
  • DHCP starvation attacks
  • Beacon list management (add, remove, clear, show, spam)

• Evil Portal & Network

  • Create captive portal
  • List available portal HTML files
  • Set/clear custom evil portal HTML
  • Connect to WiFi networks
  • Disconnect from WiFi
  • Scan local network for devices
  • Cast random videos to Cast/DIAL devices
  • Control network printers
  • TP-Link smart plug control
  • WebUI credentials configuration

• Scanning & Detection

  • Skimmer detection
  • Flipper discovery
  • AirTag scanning and listing
  • BLE spam detection
  • View all BLE traffic
  • Track Flipper RSSI strength

• Attacks & Spoofing

  • BLE spam modes: Apple, Microsoft, Samsung, Google, Random
  • Spoof selected AirTag
  • AirTag and Flipper device selection

• Packet Capture

  • Raw BLE packet capture
  • PCAP file export

• GPS Information

  • Real-time position (Latitude/Longitude)
  • Altitude and speed monitoring
  • Direction and signal quality
  • Satellite status

• Wardriving Capabilities

  • WiFi wardriving with GPS logging (CSV export)
  • BLE wardriving with GPS logging (CSV export)
  • Combined mapping of networks and devices

• LED Control

  • LED effects: Rainbow, Police, Strobe, fixed colors (Red, Green, Blue, Yellow, Purple, Cyan, Orange, White, Pink)
  • LED off mode
  • Set custom RGB pins
  • NeoPixel brightness control (0-100%)

• SD Card Configuration

  • Show current SD pin configuration
  • Set SD pins for MMC mode
  • Set SD pins for SPI mode
  • Save configuration to SD card

• System Settings

  • Timezone configuration
  • WiFi country code setting
  • Web authentication (enable/disable)
  • Access Point enable/disable across reboots
  • RGB profile selection (normal, rainbow, stealth)

• Device Management

  • Show chip info and memory details
  • Settings management (list, get, set, reset)
  • Device reboot
  • Help documentation

• Made by Spooky (https://github.com/Spooks4576)
• Additional contributions by Jay Candel (https://github.com/jaylikesbunda) and @tototo31 (https://github.com/tototo31)

• For support, please open an issue (https://github.com/jaylikesbunda/ghost_esp_app/issues) on the repository or contact Jay (https://github.com/jaylikesbunda) (@fuckyoudeki on Discord - https://discord.gg/5cyNmUMgwh).