Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP…

Embedded graphics library to create beautiful UIs for any MCU, MPU and display type.

Klipper is a 3d-printer firmware

Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports different driver chips

Raspberry Pi Pico Arduino core, for all RP2040 and RP2350 boards

OpenMPTCProuter is an open source solution to aggregate multiple internet connections using Multipath TCP (MPTCP) on OpenWrt

FW for ESP8266/ESP8285/ESP32 used with 3D printer

Raspberry Pi USB device provisioning tool (RPIBOOT)

This is Octopus open source material

Klipper, but Limitless

Forge-X: Flashforge Adventurer 5M (Pro) Firmware mod

In this repository there are the configuration files and releases for the Professional firmware with several features enabled. You can use the Configurator if you want to compile your own custom se…

babyBelt Pro

Klipper is a 3d-printer firmware. Modified to work with DWIN T5UID1 touchscreens.

Full Demo Code for Pico Breakboard Kit with 3.5" TFT Cap Touch

Klipper is a 3d-printer firmware

A native Touch UI for Simple AF

The AT32F421 Firmware Library is a firmware package which contains the drivers for all of the peripherals for AT32F421.

Pico C project implementing WS2812B LED controller with multiple predefined effects and management using HTTP server.