http request/response parser for c

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

The arguably fastest GPIO Library for the Raspberry Pi

A new lightweight, hybrid routing mesh protocol for packet radios

The ChameleonMini is a versatile contactless smartcard emulator compliant to NFC. The ChameleonMini was developed by https://kasper-oswald.de. The device is available at https://shop.kasper.it. For…

ATTiny usb bootloader with a strong emphasis on bootloader compactness.

Process ANSI escape sequences for Windows console programs.

MQTT client library for ESP8266

An Arduino CAN-Bus library for ESP32

Firmware of open-source hardware air quality monitors AirGradient ONE (indoor) and AirGradient Open Air (outdoor).

Portable nrf24L01+ library with auto acknowledgement and auto retransmission support.

Custom firmware for Tuya devices based on the PHY622x2 chipset

CLI tool for TP-Link and Kasa WiFi smart plugs.

A demo project for WT32-SC01 module

JBD BMS Linux utility

qr codes (2d barcodes) for arduino and embedded

PlatformIO test projects for the new GD32 platform and arduino core

dsPIC33E CAN (CANopen) and UART bootloader

A WiFi enabled PowerMeter for AC Voltage, Current and Power. Implementing a nice looking Web-Interface, a RESTful API, OpenHAB 1 & 2 Callbacks and a MQTT client.

Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

A new lightweight, hybrid routing mesh protocol for packet radios

JIKONG BMS Linux command line utility

Extensions and fixes for DSO Quad BIOS (SYS.HEX)

ZigBee add-on module for OpenEVSE

USBasp programmer software for windows (GUI for AVRdude), writing in Win32 API, very fast

OBD2 (On Board Diagnostics) emulator using the Linux SocketCAN interface.

Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu

Firmware for RepRap printers and similar devices