Hi, I would like to raise a problem and/or improvement. I noticed that the status of the sensors updates every 30 seconds. it would be useful to update it in real time or near real time (for example, if the state of the magnetic opening sensor was real time as it happens on the original app, I could use that sensor for other uses). I also noticed that if I set the alarm control unit to respond to the European warning and confirmation requirement in the event of sensor exclusion (essentially when you try to arm the alarm and you have an open window, it asks you for confirmation on the exclusion), the integration stops . it would therefore be advisable to expressly ask to exclude a sensor before arming the alarm.
Hi, I would like to raise a problem and/or improvement. I noticed that the status of the sensors updates every 30 seconds. it would be useful to update it in real time or near real time (for example, if the state of the magnetic opening sensor was real time as it happens on the original app, I could use that sensor for other uses). I also noticed that if I set the alarm control unit to respond to the European warning and confirmation requirement in the event of sensor exclusion (essentially when you try to arm the alarm and you have an open window, it asks you for confirmation on the exclusion), the integration stops . it would therefore be advisable to expressly ask to exclude a sensor before arming the alarm.