Creates an interface to connect Snapmaker Devices

A command-line tool for send the gcode file to Snapmaker Printers via WiFi connection.

G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)

ESP32 library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)

Digifiz Replica project code

Reverse engineering Volkswagen car radios

Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3

A library for ESP32 to interface with Chronos app over BLE

DIY bluetooth obd2 gauge with ESP32 (CYD)

ESP32 Navigator for Google map and it's Android app

ESP-BSP (Board Support Package) with ESP-IDF 5.x + ESP_LCD + LVGL 9.x for Wireless Tag WT32-SC01 Plus

Open Air Suspension Management

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

GFX4d for 4D Systems gen4-ESP32 based modules

esp_lcd driver for RA8876/LT768x displays

Display driver and GUI porting library designed for ESP series SoCs (ESP32, ESP32-S3, ESP32-P4, etc.)

Arduino library for driving display panel using the ESP32

Getting started with the Sunton ESP32-S3 7 inch display, LovyanGFX and LVGL

Arduino Code to generate speed CAN messages for ME7.5

Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)

Checksum/CRC checker/corrector for Motronic ME7.1 firmware images. Download binaries here:

TDisplay S3 running ESPhome with LVGL component

tdisplay s3 170x320 running esphome using patched tft_espi

OpenThread on Nordic nRF528xx examples.

Arduino Uno/Mega Stove Controller: Transforming Used Oil into Warmth 🔥

A pygame Dashboard mimicing the VW Digifiz Dash of the 80s. Powered by Raspberry pi4 and arduinos.