Lightweight onewire protocol library for embedded systems. It uses UART peripheral or GPIO toggling

ESP32 ESP-IDF Components (I2C, 1-wire, SPI, ADC, etc.) GUVA-S12SD AHTXX AK8975 AS7341 BH1750FVI BME680 BMP280 BMP390 CCS811 ENS160 HDC1080 HMC5883L LTR390UV MMC56X3 MPU6050 SGP4X SHT4X SSD1306 TLV493D VEML7700 DS18B20 MAX31865

Generic slave implementation of the 1-wire protocol in C

1-wire slave emulation for MSP430 microcontrollers

STM32 I2C HAL & LL library for the 1-Wire DS18B20

NTC thermistor to 1-Wire converter on Arduino Nano

1-wire bus master

STM32F103C8 (BluePill) based temperature node with relay

STM8L 1-Wire UART lib

Non-Blocking One-wire (1-Wire) Library for STM32

Multi-bus clients for macOS and Linux, and bus-host board firmware for the RP2040.

KinCony ESP32-S3 Core Development Board RTU, I2C, 1-wire Demo Application, demonstrates sensor interfacing over serial MODBUS, over I2C, and one-wire.

Reading data from the temperature sensor DS1820 and writing to MySql

SensorWatcher is a firmware for the ESP32 family of microcontrollers that automatically detects I2C, 1-Wire, or BLE sensors and uploads the sensor measurements to backends using HTTP, MQTT, or UDP.

Allows to manage a 1-Wire bus through a digital pin of an ATmega chip.

LCD Clock for HD44780 16x2 display over I²C by PCF8574 bus expander with 1-wire Thermal Sensor extension for DS1820

Defines interfaces to manage the 1-Wire communication protocol.

DS2482 I2C to 1-Wire master ChibiOS 16.x driver on STM32F103C8T6

Low-level I/O systems: OpenSBI, bare-metal C, Linux drivers.

A small web server to give access to physical sensors